[PATCH 2/3] drivers: mmc: uclass: Set removable flag based on device tree property

[Sumit Garg]

On Tue, Mar 24, 2026 at 11:22:35AM +0530, Balaji Selvanathan wrote:
> The block device removable flag should reflect whether the MMC
> device is physically removable (SD card) or soldered (eMMC). This
> information is specified in the device tree via the "non-removable"
> property and stored in the MMC_CAP_NONREMOVABLE capability flag.
> 
> Update the removable flag in the block device descriptor after
> successful MMC initialization to properly reflect the device's
> removable status. This allows the block layer and upper layers to
> distinguish between eMMC and SD cards for appropriate handling.
> 
> The default removable=1 is set in mmc_bind(), and this change
> overrides it only for non-removable devices after confirming
> successful initialization.
> 
> Signed-off-by: Balaji Selvanathan <balaji.selvanathan at oss.qualcomm.com>
> ---
>  drivers/mmc/mmc-uclass.c | 5 +++++
>  1 file changed, 5 insertions(+)
> 
> diff --git a/drivers/mmc/mmc-uclass.c b/drivers/mmc/mmc-uclass.c
> index 698530088fe..b218c69b494 100644
> --- a/drivers/mmc/mmc-uclass.c
> +++ b/drivers/mmc/mmc-uclass.c
> @@ -507,6 +507,7 @@ static int mmc_blk_probe(struct udevice *dev)
>  	struct udevice *mmc_dev = dev_get_parent(dev);
>  	struct mmc_uclass_priv *upriv = dev_get_uclass_priv(mmc_dev);
>  	struct mmc *mmc = upriv->mmc;
> +	struct blk_desc *bdesc = dev_get_uclass_plat(dev);
>  	int ret;
>  
>  	ret = mmc_init(mmc);
> @@ -515,6 +516,10 @@ static int mmc_blk_probe(struct udevice *dev)
>  		return ret;
>  	}
>  
> +	/* Update removable flag based on device capabilities */
> +	if (mmc->cfg->host_caps & MMC_CAP_NONREMOVABLE)
> +		bdesc->removable = 0;

Looking at other MMC drivers, this update happens in platform specific
driver. Check if this rather belongs to msm_sdhci.c.

-Sumit