[PATCH v1 00/10] configs: toradex: Enable EFI

[Francesco Dolcini]

From: Francesco Dolcini <francesco.dolcini at toradex.com>

Enable standard EFI support for all the arm64 Toradex boards, as required
for booting standard aarch64 Linux distribution, following the ARM
recommendations for SystemReady compliance [1].

The RTC used on these boards is not currently supported by U-Boot,
therefore it is not enabled at the moment.

Link: https://developer.arm.com/documentation/DUI1101/4-5/Configure-U-Boot-for-SystemReady [1]

Francesco Dolcini (10):
  configs: apalis-imx8: Enable EFI
  configs: aquila-am69: Enable EFI related options
  configs: colibri-imx8x: Enable EFI
  configs: toradex-smarc-imx8mp: Enable EFI related options
  configs: toradex-smarc-imx95: Enable EFI related options
  configs: verdin-am62: Enable EFI related options
  configs: verdin-am62p: Enable EFI related options
  configs: verdin-imx8mm: Enable EFI related options
  configs: verdin-imx8mp: Enable EFI related options
  configs: verdin-imx95: Enable EFI related options

 configs/apalis-imx8_defconfig          | 3 ++-
 configs/aquila-am69_a72_defconfig      | 2 +-
 configs/colibri-imx8x_defconfig        | 3 ++-
 configs/toradex-smarc-imx8mp_defconfig | 3 ++-
 configs/toradex-smarc-imx95_defconfig  | 2 ++
 configs/verdin-am62_a53_defconfig      | 3 ++-
 configs/verdin-am62p_a53_defconfig     | 3 ++-
 configs/verdin-imx8mm_defconfig        | 3 ++-
 configs/verdin-imx8mp_defconfig        | 3 ++-
 configs/verdin-imx95_defconfig         | 2 ++
 10 files changed, 19 insertions(+), 8 deletions(-)

-- 
2.47.3