[PATCH v3 2/2] scsi: Enable FUA bit in WRITE10 commands

[Balaji Selvanathan]

From: Aswin Murugan <aswin.murugan at oss.qualcomm.com>

Enable the Force Unit Access (FUA) bit in SCSI WRITE10 commands to
ensure writes bypass the device's volatile cache and go directly to
non-volatile storage. This provides write-through behavior that prevents
data loss during board resets.

Reviewed-by: Varadarajan Narayanan <varadarajan.narayanan at oss.qualcomm.com>
Signed-off-by: Aswin Murugan <aswin.murugan at oss.qualcomm.com>
Signed-off-by: Balaji Selvanathan <balaji.selvanathan at oss.qualcomm.com>
---
Changes in v3:
- Added SoB in commit description.
---
 drivers/scsi/scsi.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 9a417795851..50e7d749921 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -107,7 +107,7 @@ static void scsi_setup_write_ext(struct scsi_cmd *pccb, lbaint_t start,
 				 lbaint_t blocks)
 {
 	pccb->cmd[0] = SCSI_WRITE10;
-	pccb->cmd[1] = 0;
+	pccb->cmd[1] = 0x08; /* Set FUA bit to bypass write cache */
 	pccb->cmd[2] = (unsigned char)(start >> 24) & 0xff;
 	pccb->cmd[3] = (unsigned char)(start >> 16) & 0xff;
 	pccb->cmd[4] = (unsigned char)(start >> 8) & 0xff;

-- 
2.34.1