[PATCH 04/16] dts: k1: import pinctrl dts file from upstream folder

[Raymond Mao]

From: Raymond Mao <raymond.mao at riscstar.com>

Import k1-pinctrl.dtsi from upstream folder.

Signed-off-by: Raymond Mao <raymond.mao at riscstar.com>
---
 arch/riscv/dts/k1-pinctrl.dtsi | 66 ++++++++++++++++++++++++++++++++--
 1 file changed, 63 insertions(+), 3 deletions(-)

diff --git a/arch/riscv/dts/k1-pinctrl.dtsi b/arch/riscv/dts/k1-pinctrl.dtsi
index 14e7096fbcf..aff19c86d5f 100644
--- a/arch/riscv/dts/k1-pinctrl.dtsi
+++ b/arch/riscv/dts/k1-pinctrl.dtsi
@@ -1,12 +1,64 @@
-// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+// SPDX-License-Identifier: GPL-2.0 OR MIT
 /*
- * Copyright (C) 2022 Spacemit Inc.
- * Copyright (C) 2025 Yixun Lan <dlan at gentoo.org>
+ * Copyright (c) 2024 Yixun Lan <dlan at gentoo.org>
  */
 
+#include <dt-bindings/gpio/gpio.h>
+
 #define K1_PADCONF(pin, func) (((pin) << 16) | (func))
 
+/* Map GPIO pin to each bank's <index, offset> */
+#define K1_GPIO(x)	(x / 32) (x % 32)
+
 &pinctrl {
+	gmac0_cfg: gmac0-cfg {
+		gmac0-pins {
+			pinmux = <K1_PADCONF(0, 1)>,	/* gmac0_rxdv */
+				 <K1_PADCONF(1, 1)>,	/* gmac0_rx_d0 */
+				 <K1_PADCONF(2, 1)>,	/* gmac0_rx_d1 */
+				 <K1_PADCONF(3, 1)>,	/* gmac0_rx_clk */
+				 <K1_PADCONF(4, 1)>,	/* gmac0_rx_d2 */
+				 <K1_PADCONF(5, 1)>,	/* gmac0_rx_d3 */
+				 <K1_PADCONF(6, 1)>,	/* gmac0_tx_d0 */
+				 <K1_PADCONF(7, 1)>,	/* gmac0_tx_d1 */
+				 <K1_PADCONF(8, 1)>,	/* gmac0_tx */
+				 <K1_PADCONF(9, 1)>,	/* gmac0_tx_d2 */
+				 <K1_PADCONF(10, 1)>,	/* gmac0_tx_d3 */
+				 <K1_PADCONF(11, 1)>,	/* gmac0_tx_en */
+				 <K1_PADCONF(12, 1)>,	/* gmac0_mdc */
+				 <K1_PADCONF(13, 1)>,	/* gmac0_mdio */
+				 <K1_PADCONF(14, 1)>,	/* gmac0_int_n */
+				 <K1_PADCONF(45, 1)>;	/* gmac0_clk_ref */
+
+			bias-pull-up = <0>;
+			drive-strength = <21>;
+		};
+	};
+
+	gmac1_cfg: gmac1-cfg {
+		gmac1-pins {
+			pinmux = <K1_PADCONF(29, 1)>,	/* gmac1_rxdv */
+				 <K1_PADCONF(30, 1)>,	/* gmac1_rx_d0 */
+				 <K1_PADCONF(31, 1)>,	/* gmac1_rx_d1 */
+				 <K1_PADCONF(32, 1)>,	/* gmac1_rx_clk */
+				 <K1_PADCONF(33, 1)>,	/* gmac1_rx_d2 */
+				 <K1_PADCONF(34, 1)>,	/* gmac1_rx_d3 */
+				 <K1_PADCONF(35, 1)>,	/* gmac1_tx_d0 */
+				 <K1_PADCONF(36, 1)>,	/* gmac1_tx_d1 */
+				 <K1_PADCONF(37, 1)>,	/* gmac1_tx */
+				 <K1_PADCONF(38, 1)>,	/* gmac1_tx_d2 */
+				 <K1_PADCONF(39, 1)>,	/* gmac1_tx_d3 */
+				 <K1_PADCONF(40, 1)>,	/* gmac1_tx_en */
+				 <K1_PADCONF(41, 1)>,	/* gmac1_mdc */
+				 <K1_PADCONF(42, 1)>,	/* gmac1_mdio */
+				 <K1_PADCONF(43, 1)>,	/* gmac1_int_n */
+				 <K1_PADCONF(46, 1)>;	/* gmac1_clk_ref */
+
+			bias-pull-up = <0>;
+			drive-strength = <21>;
+		};
+	};
+
 	uart0_2_cfg: uart0-2-cfg {
 		uart0-2-pins {
 			pinmux = <K1_PADCONF(68, 2)>,
@@ -16,4 +68,12 @@
 			drive-strength = <32>;
 		};
 	};
+
+	pwm14_1_cfg: pwm14-1-cfg {
+		pwm14-1-pins {
+			pinmux = <K1_PADCONF(44, 4)>;
+			bias-pull-up = <0>;
+			drive-strength = <32>;
+		};
+	};
 };
-- 
2.25.1