[PATCH] arm64: zynqmp: Enable pci root port driver

[Michal Simek]

On 12/19/25 15:09, Michal Simek wrote:
> zcu102 has PCIe x1 enabled by default that's why enable PCIe root port
> driver also with e1000 networking card for validation.
> 
> Signed-off-by: Michal Simek <michal.simek at amd.com>
> ---
> 
>   configs/xilinx_zynqmp_virt_defconfig | 4 ++++
>   1 file changed, 4 insertions(+)
> 
> diff --git a/configs/xilinx_zynqmp_virt_defconfig b/configs/xilinx_zynqmp_virt_defconfig
> index fc610fd4af5f..bb79ddf989e4 100644
> --- a/configs/xilinx_zynqmp_virt_defconfig
> +++ b/configs/xilinx_zynqmp_virt_defconfig
> @@ -20,6 +20,7 @@ CONFIG_ENV_OFFSET_REDUND=0x1E80000
>   CONFIG_SPL_SPI_FLASH_SUPPORT=y
>   CONFIG_SPL_SPI=y
>   CONFIG_CMD_FRU=y
> +CONFIG_PCI=y
>   CONFIG_AHCI=y
>   CONFIG_SYS_MEMTEST_START=0x00000000
>   CONFIG_SYS_MEMTEST_END=0x00001000
> @@ -76,6 +77,7 @@ CONFIG_CMD_MMC=y
>   CONFIG_MMC_SPEED_MODE_SET=y
>   CONFIG_CMD_MTD=y
>   CONFIG_CMD_NAND_LOCK_UNLOCK=y
> +CONFIG_CMD_PCI=y
>   CONFIG_CMD_POWEROFF=y
>   CONFIG_CMD_SDRAM=y
>   CONFIG_CMD_SF_TEST=y
> @@ -180,8 +182,10 @@ CONFIG_PHY_XILINX=y
>   CONFIG_PHY_XILINX_GMII2RGMII=y
>   CONFIG_PHY_FIXED=y
>   CONFIG_DM_ETH_PHY=y
> +CONFIG_E1000=y
>   CONFIG_XILINX_AXIEMAC=y
>   CONFIG_ZYNQ_GEM=y
> +CONFIG_PCIE_XILINX_NWL=y
>   CONFIG_POWER_DOMAIN=y
>   CONFIG_ZYNQMP_POWER_DOMAIN=y
>   CONFIG_DM_REGULATOR=y

Applied.
M