[PATCH 0/5] Firewall ATF and OP-TEE memory regions in Sitara

[Suhaas Joshi]

This series starts by replacing the hard-coded addresses in firewall templates that are defined in
k3-binman.dtsi, by Kconfigs. Using Kconfigs would make it easier for someone to move ATF and OP-TEE
to another location, since they wouldn't have to fiddle with the firewall configs in the dtsi files.

The rest of the commits in this series add firewall configs to each device's dtsi file.

To test this, I used `k3conf read|write <atf and optee address> <val>`. These operations were
disallowed when the patches of this series were applied, expectedly.

Suhaas Joshi (5):
  arm: dts: k3-binman: Use configs for ATF/OPTEE addresses
  arm: dts: k3-am625-binman: Configure firewall for ATF/OPTEE
  arm: dts: k3-am62p-binman: Configure firewall for ATF/OPTEE
  arm: dts: k3-am62a-binman: Configure firewall for ATF/OPTEE
  arm: dts: k3-am64x-binman: Configure firewall for ATF/OPTEE

 arch/arm/dts/k3-am625-sk-binman.dtsi | 30 +++++++++++++++++++++++++
 arch/arm/dts/k3-am62a-sk-binman.dtsi | 30 +++++++++++++++++++++++++
 arch/arm/dts/k3-am62p-sk-binman.dtsi | 33 ++++++++++++++++++++++++++++
 arch/arm/dts/k3-am64x-binman.dtsi    | 31 ++++++++++++++++++++++++++
 arch/arm/dts/k3-binman.dtsi          |  8 +++----
 5 files changed, 128 insertions(+), 4 deletions(-)

-- 
2.34.1