[PATCH v4 0/3] rockchip: Add initial RK3582 support

[Quentin Schulz]

Hi Jonas,

On 1/8/26 12:07 AM, Jonas Karlman wrote:
> This series add initial support for RK3582 support. The RK3582 is a
> variant of the RK3588S with a few ip blocks disabled. What blocks are
> disabled/non-working is indicated by the ip-state in OTP.
> 
> Compared to the vendor U-Boot variant, this mark cpu, the gpu and
> vdec/venc with status=fail instead of removing nodes during DT fixup.
> Linux skip cpu cores marked as failed staring from v5.17-rc1, however
> the GIC driver will generate a harmless WARN_ON that safely can be
> ignored. A patch for Linux will be sent to skip the WARN_ON for
> failed/disabled cpu cores once this lands.
> 
> It is recommended to use rk3588_ddr_lp4_1848MHz_lp5_2112MHz_v1.19.bin
> as DRAM init blob RK3582, listed in latest RKBOOT/RK3582MINIALL.ini.
> 

As opposed to what?

I see there are 2 DDR bin and 2 eyescan DDR bin in rkbin, but I'm 
assuming at some point there'll be a newer release so we need to know 
which to use.

I'm assuming what matters is to match what's inside 
RKBOOT/RK3582MINIALL.ini? Can you add this to 
doc/board/rockchip/rockchip.rst maybe?

Cheers,
Quentin