[PATCH 4/4] imx9: Kconfig: Enable remoteproc for i.MX95 EVK

[Francesco Dolcini]

Hello Peng,

On Thu, Jan 29, 2026 at 06:25:00PM +0800, Peng Fan (OSS) wrote:
> From: Peng Fan <peng.fan at nxp.com>
> 
> Select remoteproc related configs for i.MX95 EVK to support manage CM7
> using 'rproc' cmd with steps as below:
> 
> load mmc 1:2 ${loadaddr} imx95-15x15-evk_m7_TCM_rpmsg_lite_str_echo_rtos.elf
> rproc load 0 ${loadaddr} ${filesize}
> rproc start 0
> 
> Signed-off-by: Peng Fan <peng.fan at nxp.com>
> ---
>  arch/arm/mach-imx/imx9/Kconfig | 12 ++++++++++++
>  1 file changed, 12 insertions(+)
> 
> diff --git a/arch/arm/mach-imx/imx9/Kconfig b/arch/arm/mach-imx/imx9/Kconfig
> index d9f97e4328c..7051e086072 100644
> --- a/arch/arm/mach-imx/imx9/Kconfig
> +++ b/arch/arm/mach-imx/imx9/Kconfig
> @@ -134,6 +134,12 @@ config TARGET_IMX95_19X19_EVK
>  	imply BOOTSTD_BOOTCOMMAND
>  	imply BOOTSTD_FULL
>  	imply OF_UPSTREAM
> +	select CMD_REMOTEPROC
> +	select REMOTEPROC_IMX
> +	select REGMAP
> +	select SYSCON
> +	select IMX_SM_LMM
> +	select IMX_SM_CPU

Why doing this with a select in the Kconfig?

I would expect either
 - you enable what you need in the defconfig
 - you add the select to the imx95 soc

Francesco