[PATCH 4/4] imx9: Kconfig: Enable remoteproc for i.MX95 EVK

[Peng Fan]

Hi Francesco,

> Subject: Re: [PATCH 4/4] imx9: Kconfig: Enable remoteproc for i.MX95
...
> >
> > diff --git a/arch/arm/mach-imx/imx9/Kconfig
> > b/arch/arm/mach-imx/imx9/Kconfig index
> d9f97e4328c..7051e086072 100644
> > --- a/arch/arm/mach-imx/imx9/Kconfig
> > +++ b/arch/arm/mach-imx/imx9/Kconfig
> > @@ -134,6 +134,12 @@ config TARGET_IMX95_19X19_EVK
> >  	imply BOOTSTD_BOOTCOMMAND
> >  	imply BOOTSTD_FULL
> >  	imply OF_UPSTREAM
> > +	select CMD_REMOTEPROC
> > +	select REMOTEPROC_IMX
> > +	select REGMAP
> > +	select SYSCON
> > +	select IMX_SM_LMM
> > +	select IMX_SM_CPU
> 
> Why doing this with a select in the Kconfig?
> 
> I would expect either
>  - you enable what you need in the defconfig
>  - you add the select to the imx95 soc

There are many defconfigs in NXP downstream for
a single board:
$ls -l configs/imx95_19x19_* | wc -l
21
I would not changes so many defconfigs.

I understand there is only 1 defconfig for this
board in upstream, but to ease NXP upgrading U-Boot
to new version, I choose to change Kconfig.

Changing to upstream defconfig in upstream is fine
for now.

Fabio,

What's your opinion here?

Thanks,
Peng. 

> 
> Francesco