[PATCH v2 08/14] phy: qcom: add SPL_PHY_QCOM_QMP_UFS for SPL UFS boot
Balaji Selvanathan
balaji.selvanathan at oss.qualcomm.com
Sat Jun 6 12:18:39 CEST 2026
Add a new SPL_PHY_QCOM_QMP_UFS Kconfig option to enable the
Qualcomm QMP UFS PHY driver in SPL on Snapdragon platforms.
This is a prerequisite for UFS boot support in SPL.
Switch the phy-qcom-qmp-ufs.o Makefile rule to use the $(PHASE_)
prefix so the correct config symbol is selected automatically
for both SPL and U-Boot proper builds.
Reviewed-by: Sumit Garg <sumit.garg at oss.qualcomm.com>
Signed-off-by: Balaji Selvanathan <balaji.selvanathan at oss.qualcomm.com>
---
Changes in v2:
- No changes
---
drivers/phy/qcom/Kconfig | 7 +++++++
drivers/phy/qcom/Makefile | 2 +-
2 files changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/phy/qcom/Kconfig b/drivers/phy/qcom/Kconfig
index 49f830abf01..f7c6234678f 100644
--- a/drivers/phy/qcom/Kconfig
+++ b/drivers/phy/qcom/Kconfig
@@ -32,6 +32,13 @@ config PHY_QCOM_QMP_UFS
help
Enable this to support the UFS QMP PHY on various Qualcomm chipsets.
+config SPL_PHY_QCOM_QMP_UFS
+ bool "Qualcomm QMP UFS PHY driver in SPL"
+ depends on SPL_PHY && ARCH_SNAPDRAGON
+ help
+ Enable this to support the UFS QMP PHY in SPL on various Qualcomm chipsets.
+ This is required for UFS boot support in SPL.
+
config PHY_QCOM_QUSB2
tristate "Qualcomm USB QUSB2 PHY driver"
depends on PHY && ARCH_SNAPDRAGON
diff --git a/drivers/phy/qcom/Makefile b/drivers/phy/qcom/Makefile
index 714013dc572..ec99fab4468 100644
--- a/drivers/phy/qcom/Makefile
+++ b/drivers/phy/qcom/Makefile
@@ -2,7 +2,7 @@ obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o
obj-$(CONFIG_MSM8916_USB_PHY) += msm8916-usbh-phy.o
obj-$(CONFIG_PHY_QCOM_QMP_COMBO) += phy-qcom-qmp-combo.o
obj-$(CONFIG_PHY_QCOM_QMP_PCIE) += phy-qcom-qmp-pcie.o
-obj-$(CONFIG_PHY_QCOM_QMP_UFS) += phy-qcom-qmp-ufs.o
+obj-$(CONFIG_$(PHASE_)PHY_QCOM_QMP_UFS) += phy-qcom-qmp-ufs.o
obj-$(CONFIG_PHY_QCOM_QUSB2) += phy-qcom-qusb2.o
obj-$(CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2) += phy-qcom-snps-femto-v2.o
obj-$(CONFIG_PHY_QCOM_SNPS_EUSB2) += phy-qcom-snps-eusb2.o
--
2.34.1
More information about the U-Boot
mailing list