June 2026 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Mon Jun 1 00:00:05 CEST 2026
Ending: Wed Jun 10 12:34:43 CEST 2026
Messages: 1099

• [PATCH v2 0/5] mtd: rawnand: zynq: Fixes and software ECC support   Miquel Raynal (DAVE.eu)
• [PATCH v2 1/5] mtd: rawnand: zynq: Align the layout structures with the driver namespace   Miquel Raynal (DAVE.eu)
• [PATCH v2 2/5] mtd: rawnand: zynq: Add comments about very bad practices   Miquel Raynal (DAVE.eu)
• [PATCH v2 3/5] mtd: rawnand: zynq: Make sure an of node is attached   Miquel Raynal (DAVE.eu)
• [PATCH v2 4/5] mtd: rawnand: zynq: Do not fail the probe for no reason   Miquel Raynal (DAVE.eu)
• [PATCH v2 5/5] mtd: rawnand: zynq: Fix Software ECC engine support   Miquel Raynal (DAVE.eu)
• [PATCH RESEND] watchdog: sbsa_gwdt: clamp WOR value to hw max   Juuso Rinta (Nokia)
• [PATCH RESEND] watchdog: octeontx_wdt: fix DT matches to Marvell compatibles   Juuso Rinta (Nokia)
• 回复: [PATCH v4 0/8] imx: Switch watchdog addressing from macros to devicetree   Alice Guo (OSS)
• 回复: [PATCH v1 3/3] net: fsl_enetc: Add SGMII support for i.MX95   Alice Guo (OSS)
• 回复: 回复: [PATCH v1 3/3] net: fsl_enetc: Add SGMII support for i.MX95   Alice Guo (OSS)
• [PATCH v2 0/5] spi: Convert drivers to dev_read_* APIs   Peng Fan (OSS)
• [PATCH v2 1/5] spi: spi-aspeed-smc: Use dev_read_addr_index_ptr()   Peng Fan (OSS)
• [PATCH v2 2/5] spi: cadence_qspi: Use dev_read_addr_index_ptr()   Peng Fan (OSS)
• [PATCH v2 3/5] spi: mtk_snor: Use dev_read_addr_ptr()   Peng Fan (OSS)
• [PATCH v2 4/5] spi: nxp: Use dev_read_addr_size_name()   Peng Fan (OSS)
• [PATCH v2 5/5] spi: ti_qspi: Use device APIs   Peng Fan (OSS)
• [PATCH v2 0/6] usb: Migrate drivers to use dev/ofnode APIs   Peng Fan (OSS)
• [PATCH v2 1/6] usb: musb-new: Drop unused variables   Peng Fan (OSS)
• [PATCH v2 2/6] usb: musb-new: Use ofnode and dev APIs   Peng Fan (OSS)
• [PATCH v2 3/6] usb: musb-new: Update phandle handling   Peng Fan (OSS)
• [PATCH v2 4/6] usb: host: xhci: Use dev_remap_addr_name()   Peng Fan (OSS)
• [PATCH v2 5/6] usb: mtu3: Use dev_remap_addr_name()   Peng Fan (OSS)
• [PATCH v2 6/6] usb: xhci: mvebu: Use dev_read_addr_index()   Peng Fan (OSS)
• [PATCH] tools: imx8image: Fix FSPI alignment to 4 kiB   Peng Fan (OSS)
• [PATCH 00/11] mmc: power: convert ofnode API to dev_read API   Peng Fan (OSS)
• [PATCH 01/11] mmc: fsl_esdhc_imx: convert ofnode API to dev_read API   Peng Fan (OSS)
• [PATCH 02/11] mmc: msm_sdhci: convert ofnode API to dev_read API   Peng Fan (OSS)
• [PATCH 03/11] mmc: octeontx_hsmmc: convert ofnode API to dev_read API   Peng Fan (OSS)
• [PATCH 04/11] power: domain: meson-ee-pwrc: use dev_read_phandle_with_args for ao-sysctrl   Peng Fan (OSS)
• [PATCH 05/11] power: domain: meson-gx-pwrc-vpu: use dev_read_phandle_with_args for hhi-sysctrl   Peng Fan (OSS)
• [PATCH 06/11] power: domain: imx8m: convert ofnode API to dev_read API   Peng Fan (OSS)
• [PATCH 07/11] power: pmic: pca9450: convert ofnode API to dev_read API   Peng Fan (OSS)
• [PATCH 08/11] power: pmic: qcom: convert ofnode API to dev_read API   Peng Fan (OSS)
• [PATCH 09/11] power: regulator: anatop: convert ofnode API to dev_read API   Peng Fan (OSS)
• [PATCH 10/11] power: regulator: qcom-rpmh: convert ofnode API to dev_read API   Peng Fan (OSS)
• [PATCH 11/11] power: regulator: scmi: convert ofnode API to dev_read API   Peng Fan (OSS)
• [PATCH resend 1/2] cpu: imx8_cpu: Add iMX8MP UltraLite Part cpu type   Peng Fan (OSS)
• [PATCH] power: domain: scmi: Allow failure in getting power domain attribute   Peng Fan (OSS)
• [PATCH v2 00/13] imx: Use livetree API and cleanup   Peng Fan (OSS)
• [PATCH v2 01/13] imx8m: Imply DM_THERMAL   Peng Fan (OSS)
• [PATCH v2 02/13] imx952: Update gpio node regs   Peng Fan (OSS)
• [PATCH v2 03/13] imx9: scmi: Drop get_imx_type   Peng Fan (OSS)
• [PATCH v2 04/13] imx8ulp: cleanup get_imx_type   Peng Fan (OSS)
• [PATCH v2 05/13] imx7ulp: cleanup get_imx_type   Peng Fan (OSS)
• [PATCH v2 06/13] imx: Guard print_cpuinfo with !CONFIG_IS_ENABLED(CPU)   Peng Fan (OSS)
• [PATCH v2 07/13] imx8m: dts: Update ddr firmware name   Peng Fan (OSS)
• [PATCH v2 08/13] serial: lpuart: Use livetree API for fdt access   Peng Fan (OSS)
• [PATCH v2 09/13] gpio: imx_rgpio2p: Use dev_read_addr_index   Peng Fan (OSS)
• [PATCH v2 10/13] misc: ele: Use dev_read_addr   Peng Fan (OSS)
• [PATCH v2 11/13] imx9: soc: Use livetree API for fdt access   Peng Fan (OSS)
• [PATCH v2 12/13] imx8m_evk: Select OF_LIVE   Peng Fan (OSS)
• [PATCH v2 13/13] imx9: Select OF_LIVE   Peng Fan (OSS)
• [PATCH] cmd: sf: fix sf probe using non-flash device as flash handle   Peng Fan (OSS)
• [PATCH v8 00/17] arm: am335x: Switch to upstream devicetree   Markus Schneider-Pargmann (TI)
• [PATCH v8 01/17] arm: dts: am335x-evm: Add backlight to the panel   Markus Schneider-Pargmann (TI)
• [PATCH v8 02/17] configs: am335x_evm_defconfig: Enable panel   Markus Schneider-Pargmann (TI)
• [PATCH v8 03/17] include: configs: am335x_evm: Enable vidconsole   Markus Schneider-Pargmann (TI)
• [PATCH v8 04/17] configs: am335x_evm: Enable SPL_OPTIMIZE_INLINING   Markus Schneider-Pargmann (TI)
• [PATCH v8 05/17] configs: am335x_evm: Unify evm board defconfigs   Markus Schneider-Pargmann (TI)
• [PATCH v8 06/17] am33xx: Avoid hard failure on USB probe issue   Markus Schneider-Pargmann (TI)
• [PATCH v8 07/17] arm: dts: am335x-*-u-boot: Add chosen tick-timer   Markus Schneider-Pargmann (TI)
• [PATCH v8 08/17] arm: dts: am335x-boneblack-u-boot: Add lcdc to all boot phases   Markus Schneider-Pargmann (TI)
• [PATCH v8 09/17] am33xx: Fix comment about config symbols   Markus Schneider-Pargmann (TI)
• [PATCH v8 10/17] am33xx: Support upstream devicetree USB device   Markus Schneider-Pargmann (TI)
• [PATCH v8 11/17] dm: core: Split SIMPLE_PM_BUS into phases   Markus Schneider-Pargmann (TI)
• [PATCH v8 12/17] configs: am335x_evm_defconfig: Switch to upstream devicetree   Markus Schneider-Pargmann (TI)
• [PATCH v8 13/17] arm: dts: am335x: Remove unused uboot devicetrees   Markus Schneider-Pargmann (TI)
• [PATCH v8 14/17] dm: core: Remove dependency on CLK   Markus Schneider-Pargmann (TI)
• [PATCH v8 15/17] Makefile: Move dt_dir definition   Markus Schneider-Pargmann (TI)
• [PATCH v8 16/17] arm: mach-omap2: Use dt_dir for devicetree paths   Markus Schneider-Pargmann (TI)
• [PATCH v8 17/17] arm: dts: Move remaining am335x-bone* to OF_UPSTREAM   Markus Schneider-Pargmann (TI)
• [PATCH v2 00/16] Introduce resume for J7xx SoCs   Richard Genoud (TI)
• [PATCH v2 01/16] firmware: ti_sci: add low power mode operations   Richard Genoud (TI)
• [PATCH v2 02/16] mach-k3: r5: common: add helper functions needed in LPM resume sequence   Richard Genoud (TI)
• [PATCH v2 03/16] global: k3: use gd to store the resume state   Richard Genoud (TI)
• [PATCH v2 04/16] mach-k3: r5: common: introduce j7xx_board_is_resuming()   Richard Genoud (TI)
• [PATCH v2 05/16] board: evm: Enable de-isolation of IOs at resume for j7200 and j784s4   Richard Genoud (TI)
• [PATCH v2 06/16] board: ti: evm: Store wakeup reason on scratchpad memory   Richard Genoud (TI)
• [PATCH v2 07/16] ram: k3-ddrss: Add exit retention support   Richard Genoud (TI)
• [PATCH v2 08/16] ram: k3-ddrss: Add j722s DDR resume sequence   Richard Genoud (TI)
• [PATCH v2 09/16] ram: k3-ddrss: support j784s4/j721e/j721s2 DDR resume   Richard Genoud (TI)
• [PATCH v2 10/16] arm: mach-k3: j721e: Enable LPM resume flow for J7200/J721e SOC   Richard Genoud (TI)
• [PATCH v2 11/16] arm: mach-k3: j784s4: Enable LPM resume flow for J784s4/J742s2 SOCs   Richard Genoud (TI)
• [PATCH v2 12/16] arm: mach-k3: j722s: Enable LPM resume flow   Richard Genoud (TI)
• [PATCH v2 13/16] arm: mach-k3: j721s2: Enable LPM resume flow   Richard Genoud (TI)
• [PATCH v2 14/16] arm: mach-k3: Update pm-boardcfg for all k3 platforms   Richard Genoud (TI)
• [PATCH v2 15/16] arm: dts: k3-j7200: Remove background firewall on DDR   Richard Genoud (TI)
• [PATCH v2 16/16] arm: dts: k3-j7200: Extend firewall for ATF region to TIFS   Richard Genoud (TI)
• mkimage: allow zynqmp to use a register initialization file   Sean Anderson
• mkimage: allow zynqmp to use a register initialization file   Sean Anderson
• [PATCH v2 4/6] cmd: Add flush support for all blk devices   Sean Anderson
• mkimage: allow zynqmp to use a register initialization file   Sean Anderson
• mkimage: allow zynqmp to use a register initialization file   Sean Anderson
• [PATCH] arm: mediatek: mt7988: restore full DRAM bank reporting   Rudy Andram
• [PATCH v3 1/1] efi_loader: validate PE-COFF relocation data   Ilias Apalodimas
• [PATCH v5 2/4] armv8: mmu: teach the pagetable dumper to show explicit FAULT maps   Ilias Apalodimas
• [PATCH] [RFC] lmb: Optionally limit available memory to 4 GiB on limited systems   Ilias Apalodimas
• [PATCH] [RFC] lmb: Optionally limit available memory to 4 GiB on limited systems   Ilias Apalodimas
• [PATCH] [RFC] lmb: Optionally limit available memory to 4 GiB on limited systems   Ilias Apalodimas
• [PATCH v1] lmb: Optionally limit available memory to 4 GiB on limited systems   Ilias Apalodimas
• [PATCH v5 0/7] Relocate U-Boot in the last bank   Ilias Apalodimas
• [PATCH v5 1/7] treewide: move bi_dram[] from bd to gd   Ilias Apalodimas
• [PATCH v5 2/7] common: move ram_base calculation to independent INITCALL()   Ilias Apalodimas
• [PATCH v5 3/7] common: Clean up setup_dest_addr()   Ilias Apalodimas
• [PATCH v5 4/7] rpi: Add a local get_effective_memsize()   Ilias Apalodimas
• [PATCH v5 5/7] common: Add an option to relocate on ram top   Ilias Apalodimas
• [PATCH v5 6/7] configs: Enable RELOC_ADDR_TOP on arm64   Ilias Apalodimas
• [PATCH v5 7/7] doc: Add a warning about using RELOC_ADDR_TOP   Ilias Apalodimas
• U-Boot Concept Tree Proposal   Ilias Apalodimas
• [PATCH] lmb: Rename LMB_LIMIT_DMA_BELOW_4G to LMB_LIMIT_DMA_BELOW_RAM_TOP   Ilias Apalodimas
• [PATCHv10 4/4] memory: reserve from start_addr_sp to initial_relocaddr   Ilias Apalodimas
• [PATCHv10 4/4] memory: reserve from start_addr_sp to initial_relocaddr   Ilias Apalodimas
• [PATCH v5 1/7] treewide: move bi_dram[] from bd to gd   Ilias Apalodimas
• PATCH mmc: sunxi: fix MACH_SUN9I typo in get_mclk_offset()   Ilias Apalodimas
• [PATCH v2 03/11] efi_loader: add FF-A runtime support in EFI variable TEE driver   Ilias Apalodimas
• [PATCH v2 06/11] efi_loader: move runtime variable read helpers to efi_variable.c   Ilias Apalodimas
• [PATCH v5 5/7] common: Add an option to relocate on ram top   Ilias Apalodimas
• [PATCH 3/5] x86: edison: Align U-Boot via binman to fix the boot   Ilias Apalodimas
• [PATCH v5 7/7] doc: Add a warning about using RELOC_ADDR_TOP   Ilias Apalodimas
• [PATCH v5 5/7] common: Add an option to relocate on ram top   Ilias Apalodimas
• [PATCH] rng: tpm_rng: start TPM before reading random numbers   Ilias Apalodimas
• [PATCH v6 0/7] Relocate U-Boot in the last bank   Ilias Apalodimas
• [PATCH v6 1/7] treewide: move bi_dram[] from bd to gd   Ilias Apalodimas
• [PATCH v6 2/7] common: move ram_base calculation to independent INITCALL()   Ilias Apalodimas
• [PATCH v6 3/7] common: Clean up setup_dest_addr()   Ilias Apalodimas
• [PATCH v6 4/7] rpi: Add a local get_effective_memsize()   Ilias Apalodimas
• [PATCH v6 5/7] common: Add an option to relocate on ram top   Ilias Apalodimas
• [PATCH v6 6/7] configs: Enable RELOC_ADDR_TOP on arm64   Ilias Apalodimas
• [PATCH v6 7/7] doc: Add a warning about using RELOC_ADDR_TOP   Ilias Apalodimas
• [PATCH v5 1/7] treewide: move bi_dram[] from bd to gd   Ilias Apalodimas
• UFS-TOOL. PATCH [1/4]   Neil Armstrong
• [PATCH 0/2] Add gpio configuration support for Qualcomm Snapdragon platform   Neil Armstrong
• [PATCH 5/5] **Cover Letter for ufs-tool**   Neil Armstrong
• [PATCH 2/5] ufs: Expose selected UFS functions   Neil Armstrong
• [PATCH 2/5] ufs: Expose selected UFS functions   Neil Armstrong
• [PATCH 1/5] ufs: add UFS descriptor/configuration utility support   Neil Armstrong
• [PATCH 4/5] ufs: add ufs tool the configuration   Neil Armstrong
• [PATCH 3/5] ufs: Extend the ufs user interface   Neil Armstrong
• [PATCH 1/5] ufs: add UFS descriptor/configuration utility support   Neil Armstrong
• [PATCH 5/5] ufs: doc/README.ufs   Neil Armstrong
• [PATCH 4/5] ufs: add ufs_tool to Kconfig and Makefile   Neil Armstrong
• [PATCH v2] nvme: fix dcache invalidation range in identify command   Neil Armstrong
• [PATCH] nvme: avoid deleting uncreated queues   Neil Armstrong
• [PATCH] nvme: free prp_pool on nvme_init() failure paths   Neil Armstrong
• (subset) [PATCH v2 0/6] nvme: few fixups   Neil Armstrong
• [PATCH v2 4/6] mach-snapdragon: fixup CPUs with PSCI enable-method   Neil Armstrong
• [PATCH v2 4/6] mach-snapdragon: fixup CPUs with PSCI enable-method   Neil Armstrong
• [PATCHSET PATCH 0/6] UFS-TOOL   Neil Armstrong
• [PATCH PATCHSET 1/6] MAINTAINERS: Add myself to the list of UFS maintainers   Neil Armstrong
• [PATCH PATCHSET 3/6] ufs: Expose selected UFS functions   Neil Armstrong
• [PATCH PATCHSET 4/6] ufs: ufs tool   Neil Armstrong
• [PATCH PATCHSET 5/6] ufs: add ufs_tool to Kconfig and Makefile   Neil Armstrong
• [PATCH PATCHSET 6/6] ufs: doc/usage/cmd/ufs.rst   Neil Armstrong
• U-Boot Concept Tree Proposal   Neil Armstrong
• [GIT PULL] Please pull u-boot-nvme-fixes-20260604   Neil Armstrong
• [PATCH v1 2/5] drivers: nvme: Implement NVMe flush command (0x0)   Neil Armstrong
• [PATCH] doc: boards: amlogic: update documentation for Beelink GT1 Ultimate   Neil Armstrong
• [PATCH] doc: boards: amlogic: update documentation for Beelink GT1 Ultimate   Neil Armstrong
• [PATCH 05/11] power: domain: meson-gx-pwrc-vpu: use dev_read_phandle_with_args for hhi-sysctrl   Neil Armstrong
• [PATCH 04/11] power: domain: meson-ee-pwrc: use dev_read_phandle_with_args for ao-sysctrl   Neil Armstrong
• [PATCH 07/14] power: domain: meson-ee-pwrc: Staticize and constify driver ops   Neil Armstrong
• [PATCH 08/14] power: domain: meson-gx-pwrc: Staticize and constify driver ops   Neil Armstrong
• [PATCH v4 0/2] Add regulator support to qcom-ufs driver   Neil Armstrong
• [PATCH] rng: tpm_rng: start TPM before reading random numbers   Padmarao Begari
• [PATCH] xilinx: versal: Fix snprintf invalid size argument   Francois Berder
• [PATCH] xilinx: zynqmp: Fix snprintf invalid size argument   Francois Berder
• [PATCH 0/4] arm: mach-k3: Add DM firmware memory fixup   Paresh Bhagat
• [PATCH 1/4] arm: mach-k3: Fix phandle corruption in fdt fixup   Paresh Bhagat
• [PATCH 2/4] arm: mach-k3: am62ax: Enable OF_SYSTEM_SETUP for AM62D2   Paresh Bhagat
• [PATCH 3/4] arm: mack-k3: Kconfig: Add DM firmware reserved memory configs   Paresh Bhagat
• [PATCH 4/4] arm: mach-k3: Add DM reserved memory fixup   Paresh Bhagat
• [PATCH v3 3/4] pci: pcie_dw_rockchip: drop clk_release_bulk calls   Daniele Briguglio
• [PATCH v2] ARM: dts: stm32: add U-Boot specific dtsi for stm32mp157f-dk2   Patrice CHOTARD
• [PATCH v3 0/3] Enable Arm SMC watchdog for STM32MP1   Patrice CHOTARD
• [PATCH v2 7/8] arch: arm: exynos: add j7xelte binman config   Kaustabh Chakraborty
• [PATCH] doc: boards: amlogic: update documentation for Beelink GT1 Ultimate   Karl Chan
• Friendlyelec NanoPi M5   Alexey Charkov
• [PATCH 0/7] pxe_utils: small fixups, implement BLS type 1 boot on top of them   Alexey Charkov
• [PATCH 1/7] pxe_utils: fix W=1 kernel-doc warnings   Alexey Charkov
• [PATCH 2/7] pxe_utils: accept "options" as synonym for "append"   Alexey Charkov
• [PATCH 3/7] pxe_utils: extract per-entry key parsing into parse_label_keys()   Alexey Charkov
• [PATCH 4/7] pxe_utils: export per-entry label helpers   Alexey Charkov
• [PATCH 5/7] pxe_utils: optionally ignore unknown keys in parse_label_keys()   Alexey Charkov
• [PATCH 6/7] pxe_utils: accept "title" inside a label as a synonym for "menu label"   Alexey Charkov
• [PATCH 7/7] boot: add a minimal bootmeth for the Boot Loader Specification   Alexey Charkov
• [PATCH 0/7] pxe_utils: small fixups, implement BLS type 1 boot on top of them   Alexey Charkov
• [PATCH 0/7] pxe_utils: small fixups, implement BLS type 1 boot on top of them   Alexey Charkov
• Friendlyelec NanoPi M5   Alexey Charkov
• [PATCH 0/4] spl: Add support for Falcon mode with ARM Trusted Firmware   Alexey Charkov
• [PATCH 1/4] spl: atf: support Linux as BL33 with ATF   Alexey Charkov
• [PATCH 2/4] spl: ufs: add Falcon mode load path   Alexey Charkov
• [PATCH 3/4] rockchip: spl: default to Falcon mode boot in SPL if enabled   Alexey Charkov
• [PATCH 4/4] rockchip: binman: Add support for Falcon mode FIT images with ATF+Linux   Alexey Charkov
• [PATCH 4/4] rockchip: binman: Add support for Falcon mode FIT images with ATF+Linux   Alexey Charkov
• [PATCH 1/4] spl: atf: support Linux as BL33 with ATF   Alexey Charkov
• [PATCH] serial: cortina: check RX FIFO status before reading data   Naveen Kumar Chaudhary
• [PATCH] serial: sifive: remove busy-loops from getc and putc ops   Naveen Kumar Chaudhary
• [PATCH] serial: msm_geni: remove unreachable dead code in pending()   Naveen Kumar Chaudhary
• [PATCH] serial: msm_geni: fix clock rate return type truncation   Naveen Kumar Chaudhary
• [PATCH] serial: lpuart: guard against division-by-zero in setbrg functions   Naveen Kumar Chaudhary
• [PATCH] serial: goldfish: return error when device address is invalid   Naveen Kumar Chaudhary
• [PATCH] serial: cortina: check RX FIFO status before reading data   Naveen Kumar Chaudhary
• [PATCH v3 4/9] arm: socfpga: Update Stratix10 SPL data save and restore implementation   Chee, Tien Fong
• [PATCH v3 3/9] arm: socfpga: Move firmware register settings from source code to device tree   Chee, Tien Fong
• [PATCH v3 9/9] spl: s10: Enhance watchdog support in SPL for Stratix 10   Chee, Tien Fong
• [PATCH v3 0/9] SoCFPGA: Update Boot Support for Stratix10 in U-Boot   Chee, Tien Fong
• [PATCH] arm: dts: socfpga: Add MDK support with external GPIO expander   Chee, Tien Fong
• [PATCH v3 1/3] arm: socfpga: Consolidate dram_bank_mmu_setup()   Chee, Tien Fong
• [PATCH v3 3/3] ddr: socfpga: Implement ECC DRAM scrubbing support for both Gen5/Arria10   Chee, Tien Fong
• [PATCH v2] arm: dts: soc64: Remove kernel node from binman for non-VAB flow   Chee, Tien Fong
• [PATCH v3] arm: dts: socfpga: Enable 8-bit embedded device support in Agilex5 eMMC device tree   Chee, Tien Fong
• [PATCH] drivers: clk: n5x: Add support for enable/disable API   Chee, Tien Fong
• [PATCH v4 1/9] arch: arm: dts: stratix10: Switch to using upstream Linux DT config   Chee, Tien Fong
• [PATCH v4 2/9] configs: stratix10: Combine defconfig for all boot flashes   Chee, Tien Fong
• [PATCH v4 3/9] arm: socfpga: Move firmware register settings from source code to device tree   Chee, Tien Fong
• [PATCH v4 4/9] arm: socfpga: Update Stratix10 SPL data save and restore implementation   Chee, Tien Fong
• [PATCH v4 5/9] arm: socfpga: s10: Enable system manager driver for Stratix10   Chee, Tien Fong
• [PATCH v4 6/9] ddr: altera: soc64: Add secure region support for ATF flow   Chee, Tien Fong
• [PATCH v4 7/9] clk: s10: Refactor S10 clock driver   Chee, Tien Fong
• [PATCH v4 8/9] mmc: socfpga_dw_mmc: Exclude S10 from legacy clkmgr address retrieval   Chee, Tien Fong
• [PATCH v4 9/9] spl: s10: Enhance watchdog support in SPL for Stratix 10   Chee, Tien Fong
• [PATCH v2 1/3] bootm: fix overflow of the noload kernel decompression buffer   Aristo Chen
• [PATCH v2 2/3] test/py: test kernel_noload decompression buffer overflow   Aristo Chen
• [PATCH v3 0/3] bootm: bound noload kernel decompression to the allocated buffer   Aristo Chen
• [PATCH v3 1/3] bootm: fix overflow of the noload kernel decompression buffer   Aristo Chen
• [PATCH v3 2/3] bootm: increase kernel_noload decompression headroom from 4x to 8x   Aristo Chen
• [PATCH v3 3/3] test/py: test kernel_noload decompression buffer overflow   Aristo Chen
• [PATCH v3 0/5] arm: aspeed: add initial AST2700 SoC support   Ryan Chen
• [PATCH] serial: goldfish: return error when device address is invalid   Kuan-Wei Chiu
• [PATCH 0/2] goldfish: Return error when device address is invalid   Kuan-Wei Chiu
• [PATCH 1/2] timer: goldfish: Return error when device address is invalid   Kuan-Wei Chiu
• [PATCH 2/2] rtc: goldfish: Return error when device address is invalid   Kuan-Wei Chiu
• [PATCH 0/2] Fastboot abort key support   Casey Connolly
• [PATCH v2] arm: dts: ipq5424-rdp466: add chosen node for serial console   Casey Connolly
• [PATCH] video: simplefb: fix rot prop handling   Casey Connolly
• [PATCH RESEND 12/16] mach-snapdragon: parse incoming ARM32 ATAGS   Casey Connolly
• [PATCH 08/11] power: pmic: qcom: convert ofnode API to dev_read API   Casey Connolly
• [PATCH 10/11] power: regulator: qcom-rpmh: convert ofnode API to dev_read API   Casey Connolly
• [PATCH RESEND 12/16] mach-snapdragon: parse incoming ARM32 ATAGS   Casey Connolly
• [PATCH 02/11] mmc: msm_sdhci: convert ofnode API to dev_read API   Casey Connolly
• [PATCH 00/13] Generate Android boot images with binman   Casey Connolly
• [PATCH 08/11] mach-snapdragon: Integrate reboot-mode handling   Casey Connolly
• [PATCH 00/13] Generate Android boot images with binman   Casey Connolly
• [PATCH v2 0/6] arm: snapdragon: Add snagboot support for Lemans-EVK   Casey Connolly
• [PATCH v2 6/6] MAINTAINERS: add qcom_lemans_snagboot_defconfig to ARM SNAPDRAGON   Casey Connolly
• [PATCH v2] gpio: qcom_spmi_gpio: move PM8998 GPIO from legacy pmic driver   Casey Connolly
• [PATCH v6 0/4] armv8: mmu: fix region unmapping and optimise set_one_region()   Casey Connolly
• [PATCH v6 1/4] armv8: mmu: add a function to help debug TLB lookups   Casey Connolly
• [PATCH v6 2/4] armv8: mmu: teach the pagetable dumper to show explicit FAULT maps   Casey Connolly
• [PATCH v6 3/4] armv8: mmu: commonize the set_one_region() loop   Casey Connolly
• [PATCH v6 4/4] armv8: mmu: fix and optimise explicitly unmapping regions   Casey Connolly
• Binman with Qualcomm   Casey Connolly
• Binman with Qualcomm   Casey Connolly
• [PATCH] arm: dts: talos-evk: Set USB controllers to peripheral mode   Casey Connolly
• [PATCH] clk: qcom: sa8775p: Add SDCC1 clock support with frequency table   Casey Connolly
• (subset) [PATCH v4 0/2] Add regulator support to qcom-ufs driver   Casey Connolly
• [PATCH v2] gpio: qcom_spmi_gpio: move PM8998 GPIO from legacy pmic driver   Casey Connolly
• [PATCH] board: qualcomm: phone: fix 'Dump bootargs'   Casey Connolly
• [PATCH] board: dragonboard410c: fix chainloaded.config   Casey Connolly
• [PATCH] configs: qcs615/qcs9100: Enable watchdog autostart   Casey Connolly
• [PATCH v2] dts: lemans-evk-u-boot: add override dtsi   Casey Connolly
• [PATCH v2] arm: dts: ipq5424-rdp466: add chosen node for serial console   Casey Connolly
• [PATCH v2 0/6] arm: omap: Add back omap4 support   Bastien Curutchet
• [PATCH v3 0/6] arm: omap: Add back omap4 support   Bastien Curutchet
• [PATCH v3 1/6] arm: omap: Move PRM I2C channel frequency to vc.c   Bastien Curutchet
• [PATCH v3 2/6] arm: ti: omap: Extract common clock definitions   Bastien Curutchet
• [PATCH v3 3/6] clk: ti: Remove AM33xx dependency   Bastien Curutchet
• [PATCH v3 4/6] configs: omap4: remove unused boot target devices   Bastien Curutchet
• [PATCH v3 5/6] arm: ti: Introduce back omap4 support   Bastien Curutchet
• [PATCH v3 6/6] board: variscite: add support for the omap4_var_som   Bastien Curutchet
• [PATCH v2 0/6] arm: omap: Add back omap4 support   Bastien Curutchet
• [PATCH] usb: gadget: fastboot: avoid stale IN dequeue   Sam Day
• [PATCH] video: simplefb: fix rot prop handling   Sam Day
• [PATCH 00/16] MSM8960 / mach-snapdragon ARMv7 support   Sam Day
• [PATCH 01/16] serial: msm: UARTDM <1.4 support   Sam Day
• [PATCH 02/16] timer: Qualcomm KPSS timer support   Sam Day
• [PATCH 03/16] arm: save_prev_bl_data: ARM32 support   Sam Day
• [PATCH 04/16] mach-snapdragon: qcom_parse_memory 32-bit support   Sam Day
• [PATCH 05/16] mach-snapdragon: gate ARM64 features   Sam Day
• [PATCH 06/16] mach-snapdragon: introduce ARCH_SNAPDRAGON_ARM32   Sam Day
• [PATCH 07/16] configs: introduce qcom_armv7_defconfig   Sam Day
• [PATCH RESEND 12/16] mach-snapdragon: parse incoming ARM32 ATAGS   Sam Day
• [PATCH v2 5/6] mach-snapdragon: MSM8916 spin-table CPU boot support   Sam Day
• [PATCH v2 4/6] mach-snapdragon: fixup CPUs with PSCI enable-method   Sam Day
• [PATCH 00/13] Generate Android boot images with binman   Sam Day
• [PATCH RESEND 00/16] MSM8960 / mach-snapdragon ARMv7 support   Sam Day
• [PATCH RESEND 15/16] serial: msm: wait for TX empty before reinit   Sam Day
• [PATCH 08/11] mach-snapdragon: Integrate reboot-mode handling   Sam Day
• [PATCH RESEND 12/16] mach-snapdragon: parse incoming ARM32 ATAGS   Sam Day
• [PATCH v2 4/6] mach-snapdragon: fixup CPUs with PSCI enable-method   Sam Day
• [PATCH] mach-snapdragon: formalize APQ8016 debug UART init   Sam Day
• [PATCH 00/13] Generate Android boot images with binman   Sam Day
• [PATCH v2 1/8] binman: Android boot image support   Sam Day
• [PATCH v2 5/8] binman: android_boot: SEANDROIDENFORCE support   Sam Day
• [PATCH v2 3/8] binman: android_boot: vendor-dt support   Sam Day
• Binman with Qualcomm   Sam Day
• [PATCH v2 7/8] arch: arm: exynos: add j7xelte binman config   Sam Day
• [PATCH v2 4/8] binman: Add QCDT support   Sam Day
• [PATCH v2 6/8] binman: Add DTBH support   Sam Day
• [PATCH] fs: ubifs: fix ubifs_finddir() result check   Patrick Delaunay
• [PATCH v3] usb: xhci-mvebu: Enable Armada 375 in XHCI driver   Tony Dinh
• No subject   Tony Dinh
• [PATCH v4 1/4] imx9: Add support for saving DDR training data to NVM   Francesco Dolcini
• [PATCH v2 01/13] imx8m: Imply DM_THERMAL   Francesco Dolcini
• [PATCH v2] arm: k3: Kconfig: Enable fTPM and RPMB support   Francesco Dolcini
• [PATCH 0/4] mailbox: mpfs-mbox: fixes and syscon support   Conor Dooley
• [PATCH] imx93_frdm: Add support for 2CS 2GB DRAM support   Mathieu Dubois-Briand
• [PATCH] imx93_frdm: Add support for 2CS 2GB DRAM support   Mathieu Dubois-Briand
• [PATCH v7] tools: mkeficapsule: Rework pkcs11 support   Wojciech Dubowik
• [PATCH v5 0/9] ARM: RPi5: Enable PCIe   Torsten Duwe
• [PATCH v5 1/9] ARM: bcm283x: Add bcm2712 PCIe memory window   Torsten Duwe
• [PATCH v5 2/9] pci: brcmstb: Fix PCIe bus numbers   Torsten Duwe
• [PATCH v5 3/9] pci: brcmstb: Support different variants using a cfg struct   Torsten Duwe
• [PATCH v5 4/9] reset: Add RPi5 brcmstb reset facilities   Torsten Duwe
• [PATCH v5 5/9] reset: Add RPi5 rescal reset facilities   Torsten Duwe
• [PATCH v5 6/9] pci: brcmstb: Get and use bridge and rescal reset properties   Torsten Duwe
• [PATCH v5 7/9] pci: brcmstb: Fix iBAR size calculation   Torsten Duwe
• [PATCH v5 8/9] pci: brcmstb: rework iBAR handling   Torsten Duwe
• [PATCH v5 9/9] pci: brcmstb: Adapt to AXI bridge   Torsten Duwe
• [PATCH] configs: phycore_am62x_a53_defconfig: Enable fastboot   Wadim Egorov
• [PATCH v4 0/8] imx: Switch watchdog addressing from macros to devicetree   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-master-20260604   Fabio Estevam
• [PATCH v1] board: toradex: verdin-imx95: fix ram size check calculated addresses   Fabio Estevam
• [PATCH] imx: kontron-sl-mx6ul: Enable CONFIG_DM_MDIO to fix boot abort   Fabio Estevam
• [PATCH 1/3] cpu: imx8_cpu: Fix CPU segment information print   Fabio Estevam
• [PATCH] tools: imx8image: Fix FSPI alignment to 4 kiB   Fabio Estevam
• [PATCH v3 1/3] binman: imx8mimage: Handle nxp,boot-from = "fspi"   Fabio Estevam
• [GIT PULL] Please pull u-boot-imx-next-20260605   Fabio Estevam
• [PATCH 00/13] imx: Use livetree API and cleanup   Fabio Estevam
• [PATCH] board: purism: Add support for the Librem5 devkit   Fabio Estevam
• [PATCH 1/4] imx9: scmi: Fix temperature range for Extended industrial parts   Peng Fan
• [PATCH 2/4] imx9: scmi: Print CPU part number name   Peng Fan
• [PATCH 3/4] iMX9: scmi: Disable fused modules for iMX95/94/952   Peng Fan
• [PATCH 4/4] nxp: imx[95,94,952]_evk: Implement board_fix_fdt   Peng Fan
• [PATCH] imx93_frdm: Add support for 2CS 2GB DRAM support   Peng Fan
• [PATCH v1] thermal: jc42: add JEDEC JC-42.4/TSE2004av SPD   Peng Fan
• [PATCH v2] thermal: imx_tmu: extend with QorIQ/Layerscape TMU   Peng Fan
• [PATCH 1/4] imx9: scmi: Fix temperature range for Extended industrial parts   Peng Fan
• [GIT PULL] Please pull mmc-next-2026-06-10   Peng Fan
• [GIT PULL] Please pull fsl-qoriq-next-2026-06-09   Peng Fan
• PATCH mmc: sunxi: fix MACH_SUN9I typo in get_mclk_offset()   Omar Ivan Fardjoume
• [PATCH v4 0/7] TQMa7 eeprom sysinfo driver   Alexander Feilke
• [PATCH v4 1/7] sysinfo: uclass: use sysinfo_priv size for per_device_auto   Alexander Feilke
• [PATCH v4 2/7] sysinfo: add sysinfo_get_and_detect() helper   Alexander Feilke
• [PATCH v4 3/7] sysinfo: tq_eeprom: new driver   Alexander Feilke
• [PATCH v4 4/7] board: tq: common: add sysinfo setup helper   Alexander Feilke
• [PATCH v4 5/7] arm: dts: tqma7: add eeprom nvmem-layout   Alexander Feilke
• [PATCH v4 6/7] arm: dts: tqma7: integrate tq,eeprom sysinfo driver   Alexander Feilke
• [PATCH v4 7/7] boards: tqma7: call tq-sysinfo setup   Alexander Feilke
• [PATCH 1/1] board: tqma7: update fastboot env   Feilke, Alexander
• [RESEND v2 0/2] Add support for StarFive VisionFive 2 Lite eMMC board   Hal Feng
• [PATCH v2 0/6] net: Use dev APIs   Jerome Forissier
• [PATCH v2] net: airoha_eth: fix mt7531 mdio related initialization bug   Jerome Forissier
• Please pull net-next-20260603   Jerome Forissier
• Please pull net-20260603   Jerome Forissier
• [PATCH] net: clear IP defragmentation state after returning a complete packet   Mateusz Furdyna
• [PATCH] net: clear IP defragmentation state after returning a complete packet   Mateusz Furdyna
• [PATCH 20/20] arm: dts: k3-j7200: Extend firewall for ATF region to TIFS   Richard GENOUD
• [EXTERNAL] [PATCH 11/20] mach-k3: r5: common: add helper functions needed in LPM resume sequence   Richard GENOUD
• [PATCH 03/20] board: ti: j721e: Add resume detection for J721e/J7200   Richard GENOUD
• [PATCH v5 1/7] treewide: move bi_dram[] from bd to gd   Christophe Leroy (CS GROUP)
• [PATCH] mtd: spinand: add support for Etron SPI-NAND flashes   Weijie Gao
• [PATCH v2] mtd: spinand: add support for Etron SPI-NAND flashes   Weijie Gao
• [PATCH] arm: mediatek: mt7988: restore full DRAM bank reporting   Weijie Gao
• [PATCH RESEND 15/16] serial: msm: wait for TX empty before reinit   Stephan Gerhold
• [PATCH v2 4/6] mach-snapdragon: fixup CPUs with PSCI enable-method   Stephan Gerhold
• [PATCH v2 5/6] mach-snapdragon: MSM8916 spin-table CPU boot support   Stephan Gerhold
• [PATCH] mach-snapdragon: formalize APQ8016 debug UART init   Stephan Gerhold
• Flashing Edison   Simon Glass
• [PATCH v3 1/6] reset: Allow per-board reset type   Simon Glass
• [PATCH v3 2/6] reset: Add explicit cold reset support   Simon Glass
• [PATCH v3 3/6] reset: Print reset type on diagnostic console   Simon Glass
• [PATCH v3 4/6] reset: x86: Use cpu_hlt() in pch_sysreset_power_off()   Simon Glass
• [PATCH v3 5/6] docs: reset: document cold reset option   Simon Glass
• [PATCH v3 6/6] tests: reset: add cold/warm reset types   Simon Glass
• [PATCH 1/6] usb: musb-new: Drop unused variables   Simon Glass
• [PATCH 2/6] usb: musb-new: Use ofnode and dev APIs   Simon Glass
• [PATCH 3/6] usb: musb-new: Update phandle handling   Simon Glass
• [PATCH 4/6] usb: host: xhci: Use dev_remap_addr_name()   Simon Glass
• [PATCH 5/6] usb: mtu3: Use dev_remap_addr_name()   Simon Glass
• [PATCH 6/6] usb: xhci: mvebu: Use dev_read_addr_index()   Simon Glass
• [RFC PATCH] virtio: Add driver for virtio gpu   Simon Glass
• [PATCH v7 01/15] ecdsa: fix support of secp521r1   Simon Glass
• [PATCH v3 1/7] sysinfo: uclass: use sysinfo_priv size for per_device_auto   Simon Glass
• [PATCH v3 2/7] sysinfo: add sysinfo_get_and_detect() helper   Simon Glass
• [PATCH v3 3/7] sysinfo: tq_eeprom: new driver   Simon Glass
• [PATCH v3 4/7] board: tq: common: add sysinfo setup helper   Simon Glass
• [PATCH v3 5/7] arm: dts: tqma7: add eeprom nvmem-layout   Simon Glass
• [PATCH v3 6/7] arm: dts: tqma7: integrate tq, eeprom sysinfo driver   Simon Glass
• [PATCH v3 7/7] boards: tqma7: call tq-sysinfo setup   Simon Glass
• U-Boot Concept Tree Proposal   Simon Glass
• [PATCH v5] tools: mkeficapsule: Rework pkcs11 support   Simon Glass
• [PATCH v2 2/3] arm64: dts: imx8mm: Generate FSPI header using binman imx8mimage   Simon Glass
• [PATCH v2 3/3] arm64: dts: imx8mn: Generate FSPI header using binman imx8mimage   Simon Glass
• [PATCH v2 1/3] bootm: fix overflow of the noload kernel decompression buffer   Simon Glass
• [PATCH v2 2/3] test/py: test kernel_noload decompression buffer overflow   Simon Glass
• [PATCH v2 3/3] bootm: increase kernel_noload decompression headroom from 4x to 8x   Simon Glass
• [PATCH] net: clear IP defragmentation state after returning a complete packet   Simon Glass
• [PATCH v4 2/7] reset: Add explicit cold reset support   Simon Glass
• [PATCH v4 3/7] reset: Print reset type on diagnostic console   Simon Glass
• [PATCH v4 4/7] reset: x86: Use cpu_hlt() in pch_sysreset_power_off()   Simon Glass
• [PATCH v4 5/7] reset: x86: Use cpu_hlt() in efi_reset_system()   Simon Glass
• [PATCH v4 6/7] docs: reset: document cold reset option   Simon Glass
• [PATCH v4 7/7] tests: reset: add cold/warm reset types   Simon Glass
• [PATCH v2 03/16] global: k3: use gd to store the resume state   Simon Glass
• [PATCH v4] image-fit: Validate external data offset and size   Simon Glass
• [PATCH v4 2/7] sysinfo: add sysinfo_get_and_detect() helper   Simon Glass
• [v2,0/3] bootm: bound noload kernel decompression to the allocated buffer   Simon Glass
• [PATCH] net: clear IP defragmentation state after returning a complete packet   Simon Glass
• [PATCH v5] tools: mkeficapsule: Rework pkcs11 support   Simon Glass
• [PATCH v2 4/6] cmd: Add flush support for all blk devices   Simon Glass
• [PATCH v2 5/5] spi: ti_qspi: Use device APIs   Simon Glass
• [v2,0/5] spi: Convert drivers to dev_read_* APIs   Simon Glass
• [PATCH v2 2/6] usb: musb-new: Use ofnode and dev APIs   Simon Glass
• [PATCH v2 3/6] usb: musb-new: Update phandle handling   Simon Glass
• [PATCH v4 02/13] binman: qcom: Add type definitions for Qualcomm binaries   Simon Glass
• [PATCH v4] fdt: Check return value of fdt_get_name() calls   Simon Glass
• [PATCH v5] image-fit: Validate external data offset and size   Simon Glass
• [PATCH v4 01/13] binman: Ignore noload segments for image numbering   Simon Glass
• Flashing Edison   Simon Glass
• [PATCH v5 1/7] treewide: move bi_dram[] from bd to gd   Simon Glass
• [PATCH v5 4/7] rpi: Add a local get_effective_memsize()   Simon Glass
• [PATCH v5 5/7] common: Add an option to relocate on ram top   Simon Glass
• [PATCH v5 6/7] configs: Enable RELOC_ADDR_TOP on arm64   Simon Glass
• [PATCH v5 7/7] doc: Add a warning about using RELOC_ADDR_TOP   Simon Glass
• [PATCH 0/5] edison: Fix mainline boot and convert the image to binman   Simon Glass
• [PATCH 1/5] binman: Add an entry type for the Intel OSIP header   Simon Glass
• [PATCH 2/5] edison: Widen the DFU auto-probe window for flashing U-Boot   Simon Glass
• [PATCH 3/5] x86: edison: Align U-Boot via binman to fix the boot   Simon Glass
• [PATCH 4/5] CI: Add an sjg-lab job for the Intel Edison   Simon Glass
• [PATCH 5/5] doc: edison: Rewrite the update instructions   Simon Glass
• [PATCH 00/13] Generate Android boot images with binman   Simon Glass
• [PATCH v5 5/7] common: Add an option to relocate on ram top   Simon Glass
• [PATCH v2 1/8] binman: Android boot image support   Simon Glass
• [PATCH v2 2/8] .gitignore: ignore binman-generated blobs   Simon Glass
• [PATCH v2 2/8] .gitignore: ignore binman-generated blobs   Simon Glass
• [PATCH v2 3/8] binman: android_boot: vendor-dt support   Simon Glass
• [PATCH v2 4/8] binman: Add QCDT support   Simon Glass
• [PATCH v2 5/8] binman: android_boot: SEANDROIDENFORCE support   Simon Glass
• [PATCH v2 6/8] binman: Add DTBH support   Simon Glass
• [PATCH v2 7/8] arch: arm: exynos: add j7xelte binman config   Simon Glass
• [PATCH v2 8/8] configs: exynos-mobile: pull in BINMAN   Simon Glass
• [v2,0/8] Generate Android boot images with binman   Simon Glass
• [PATCH 00/13] Generate Android boot images with binman   Simon Glass
• Binman with Qualcomm   Simon Glass
• [PATCH] CI: Add an sjg-lab job for the Digilent Zybo   Simon Glass
• Binman with Qualcomm   Simon Glass
• Binman with Qualcomm   Simon Glass
• [PATCH 3/4] arm: dts: ipq9650: Add override dtsi   Ferass El Hafidi
• [PATCH 00/13] Generate Android boot images with binman   Ferass El Hafidi
• mkimage: allow zynqmp to use a register initialization file   Erich E. Hoover
• [PATCH] mkimage: allow zynqmpbif to use a register initialization file   Erich E. Hoover
• mkimage: allow zynqmp to use a register initialization file   Erich E. Hoover
• mkimage: allow zynqmp to use a register initialization file   Erich E. Hoover
• mkimage: allow zynqmp to use a register initialization file   Erich E. Hoover
• [PATCH v2] mkimage: allow zynqmpbif to use a register initialization file   Erich E. Hoover
• [PATCH 1/2] mtd: spinand: core: fix Winbond W25N bad block marker (1 byte BBM)   Zunyi Hu
• [PATCH 2/2] mtd: spinand: winbond: add support for W25N01G   Zunyi Hu
• [PATCH 1/2] imx6: clock: fix clk0/clk1 swap in select_ldb_di_clock_source()   Md Shofiqul Islam
• [PATCH 2/2] imx6: guard LDB clock init with appropriate video config   Md Shofiqul Islam
• [PATCH v4] fdt: Check return value of fdt_get_name() calls   Anton Ivanov
• [PATCH v4] image-fit-sig: Validate hashed-strings region size   Anton Ivanov
• [PATCH v4] fdt_region: Check return value of fdt_get_property_by_offset() calls   Anton Ivanov
• [PATCH v4] image-fit: Validate external data offset and size   Anton Ivanov
• [PATCH v4] image-fit: Limit recursion depth in fdt_check_no_at()   Anton Ivanov
• [PATCH v3] image-fit-sig: Validate hashed-strings region size   Anton Ivanov
• [PATCH v4] image-fit: Validate external data offset and size   Anton Ivanov
• [PATCH v5] image-fit: Validate external data offset and size   Anton Ivanov
• [PATCH v4] image-fit: Validate external data offset and size   Anton Ivanov
• [PATCH v3 0/3] fs: regression-safe load <iface> for null_dev_desc_ok fstypes   Vincent Jardin
• [PATCH v3 1/3] fs: dispatch null_dev_desc_ok filesystems before lookup   Vincent Jardin
• [PATCH v3 2/3] doc: usage: cmd: load: null-block-device   Vincent Jardin
• [PATCH v3 3/3] test: py: load: check null_dev_desc_ok dispatch   Vincent Jardin
• [PATCH] video: fix no display when serial console is disabled   Desapogu Jayaramudu
• [PATCH v4 00/10] Add Rockchip USBPHY DM driver   Johan Jonker
• [PATCH v4 01/10] rockchip: configs: compile rk3066 SPL with SPL_OF_REAL   Johan Jonker
• [PATCH v4 02/10] usb: Kconfig: add SPL_USB_DWC2   Johan Jonker
• [PATCH v4 03/10] phy: rockchip: sort Makefile and Kconfig   Johan Jonker
• [PATCH v4 04/10] rockchip: bind grf syscon usbphy subnode   Johan Jonker
• [PATCH v4 05/10] phy: rockchip: add phy-rockchip-usb2.c   Johan Jonker
• [PATCH v4 06/10] rockchip: configs: use phy-rockchip-usb2 DM driver   Johan Jonker
• [PATCH v4 07/10] usb: phy: remove rockchip_usb2_phy.c   Johan Jonker
• [PATCH v4 08/10] rockchip: spl-boot-order: add usb boot option   Johan Jonker
• [PATCH v4 09/10] arm: dts: rockchip: add USB required properties in SPL for mk808   Johan Jonker
• [PATCH v4 10/10] rockchip: configs: enable USB in SPL for mk808   Johan Jonker
• [PATCH v1] doc: clean up README.rockchip   Johan Jonker
• [PATCH v1] Kconfig: replace deprecated help word   Johan Jonker
• [PATCH v1 0/8] Kconfig restyle   Johan Jonker
• [PATCH v1 1/8] Kconfig: armv7: fix typo   Johan Jonker
• [PATCH v1 2/8] Kconfig: powerpc: mpc85xx: fix typo   Johan Jonker
• [PATCH v1 3/8] Kconfig: power: pmic: fix typo   Johan Jonker
• [PATCH v1 4/8] Kconfig: themal: fix typo   Johan Jonker
• [PATCH v1 5/8] Kconfig: misc: add empty line   Johan Jonker
• [PATCH v1 6/8] Kconfig: arm: restyle   Johan Jonker
• [PATCH v1 7/8] Kconfig: arch: restyle   Johan Jonker
• [PATCH v1 8/8] Kconfig: board: restyle   Johan Jonker
• [PATCH v1 0/3] rockchip: pinctrl: use include from dts/upstream   Johan Jonker
• [PATCH v1 1/3] rockchip: pinctrl: replace RK_FUNC_n defines   Johan Jonker
• [PATCH v1 2/3] rockchip: pinctrl: replace RK_GPIOn defines   Johan Jonker
• [PATCH v1 3/3] rockchip: pinctrl: use include from dts/upstream   Johan Jonker
• [PATCH v3 05/12] phy: rockchip: add phy-rockchip-usb2.c   Jonas Karlman
• [PATCH v3 07/12] rockchip: reset: make reset-rockchip available in SPL   Jonas Karlman
• [PATCH v3 08/12] rockchip: phy: make phy-rockchip-usb2 available in SPL   Jonas Karlman
• [PATCH v3 09/12] usb: make dwc2_usb available in SPL   Jonas Karlman
• Friendlyelec NanoPi M5   Jonas Karlman
• Friendlyelec NanoPi M5   Jonas Karlman
• [PATCH 4/4] rockchip: binman: Add support for Falcon mode FIT images with ATF+Linux   Jonas Karlman
• [PATCH 4/4] rockchip: binman: Add support for Falcon mode FIT images with ATF+Linux   Jonas Karlman
• [PATCH] mmc: sdhci-cadence: trigger tuning for SD HS mode on SD6HC (v6) PHY   Kathpalia, Tanmay
• [PATCH] mmc: sd: Handle UHS-I voltage signaling without power cycle   Kathpalia, Tanmay
• [PATCH v1 1/4] arm: k3: select tifsstub via board_fit_config_name_match   Akashdeep Kaur
• [RFC PATCH 0/3] boot/fit: fix CVE-2021-27138 while keeping '@' node names   Lorenz Kofler
• [RFC PATCH 1/3] boot/fit: require exact subnode matches for FIT references   Lorenz Kofler
• [RFC PATCH 2/3] boot/fit: stop rejecting '@' during image and config verification   Lorenz Kofler
• [RFC PATCH 3/3] boot/fit: stop rejecting '@' during FIT format checking   Lorenz Kofler
• [RFC PATCH 0/3] boot/fit: fix CVE-2021-27138 while keeping '@' node names   Lorenz Kofler
• [PATCH v2] usb: gadget: atmel: use calloc() to allocate endpoint list   Mattijs Korpershoek
• [PATCH] dwc3: Fix fastboot re-run failure with flat DTS   Mattijs Korpershoek
• [PATCH v2 00/11] Move test/py image creation into separate modules   Mattijs Korpershoek
• [PATCH v2 01/11] test: Create a common file for image utilities   Mattijs Korpershoek
• [PATCH v2 03/11] test: Move script image-creation to its own file   Mattijs Korpershoek
• [PATCH v2 02/11] test: Move extlinux image-creation to its own file   Mattijs Korpershoek
• [PATCH v2 04/11] test: Move ChromeOS image-creation to its own file   Mattijs Korpershoek
• [PATCH v2 05/11] test: Move Android image-creation to its own file   Mattijs Korpershoek
• [PATCH v2 06/11] test: Move EFI image-creation to its own file   Mattijs Korpershoek
• [PATCH v2 07/11] test: Move the configuration-editor setup to its own file   Mattijs Korpershoek
• [PATCH v2 08/11] test: Add Args docstrings to img setup functions   Mattijs Korpershoek
• [PATCH v2 09/11] test: Reformat line wraps in img setup functions   Mattijs Korpershoek
• [PATCH v2 10/11] sandbox: Find disk images in the persistent-data directory   Mattijs Korpershoek
• [PATCH v2 11/11] test: Move disk images to persistent-data directory   Mattijs Korpershoek
• [PATCH v2] fastboot: read fastboot buffer address from fastboot_addr_r   Mattijs Korpershoek
• [PATCH v2] android_ab: fix slot selection   Mattijs Korpershoek
• [PATCH] fastboot: Fix blk_dwrite error checking   Mattijs Korpershoek
• [PATCH v11 00/12] pinctrl: add support of Airoha SoCs   Mikhail Kshevetskiy
• [PATCH v11 01/12] bitops: import BITS_PER_TYPE() macro from linux   Mikhail Kshevetskiy
• [PATCH v11 02/12] bitfield: Add less-checking __FIELD_{GET,PREP}()   Mikhail Kshevetskiy
• [PATCH v11 03/12] bitfield: Add non-constant field_{prep, get}() helpers   Mikhail Kshevetskiy
• [PATCH v11 04/12] pinctrl: add more pinconf/pinctrl definitions   Mikhail Kshevetskiy
• [PATCH v11 05/12] pinctrl: sort and format the contents of the makefile   Mikhail Kshevetskiy
• [PATCH v11 06/12] pinctrl: airoha: add shared pinctrl code   Mikhail Kshevetskiy
• [PATCH v11 07/12] pinctrl: airoha: add pin controller and gpio driver for AN7581 SoC   Mikhail Kshevetskiy
• [PATCH v11 08/12] pinctrl: airoha: add pin controller and gpio driver for AN7583 SoC   Mikhail Kshevetskiy
• [PATCH v11 09/12] pinctrl: airoha: add pin controller and gpio driver for EN7523 SoC   Mikhail Kshevetskiy
• [PATCH v11 10/12] configs: airoha: an7581: enable pinctrl/gpio support   Mikhail Kshevetskiy
• [PATCH v11 11/12] configs: airoha: en7523: enable pinctrl/gpio support   Mikhail Kshevetskiy
• [PATCH v11 12/12] arm: dts: en7523: add pinctrl/gpio support, drop legacy gpio support   Mikhail Kshevetskiy
• [PATCH v2] net: airoha_eth: fix mt7531 mdio related initialization bug   Mikhail Kshevetskiy
• [PATCH v3] net: airoha_eth: fix mt7531 mdio related initialization bug   Mikhail Kshevetskiy
• [EXTERNAL] [PATCH 11/20] mach-k3: r5: common: add helper functions needed in LPM resume sequence   Kumar, Abhash
• [PATCH v4 1/4] imx9: Add support for saving DDR training data to NVM   Kumar, Udit
• [EXTERNAL] Re: [PATCH v2 5/7] arm: dts: k3-am69: ddr: Update to v0.12.0 of DDR config tool   Kumar, Udit
• [PATCH RESEND] usb: gadget: atmel: use calloc() to allocate endpoint list   Zixun LI
• [PATCH v2] usb: gadget: atmel: use calloc() to allocate endpoint list   Zixun LI
• [PATCH v2 3/8] configs: socfpga: n5x: enable CMD_MTD and SPL SDRAM support   LOK, CHEN HUEI
• [PATCH v2 4/8] configs: socfpga: n5x: enable required configs for DDR retention   LOK, CHEN HUEI
• [PATCH v2 6/8] arm: socfpga: n5x: switch firewall setup to driver model   LOK, CHEN HUEI
• [PATCH v4] drivers: fpga: Use FPGA_INTEL_SDM_MAILBOX conditional instead of Agilex/Stratix10   LOK, CHEN HUEI
• [PATCH v4] drivers: fpga: Use FPGA_INTEL_SDM_MAILBOX conditional instead of Agilex/Stratix10   LOK, CHEN HUEI
• [PATCH] arm: mediatek: mt7988: restore full DRAM bank reporting   David Lechner
• [PATCH] arm: mediatek: mt7988: restore full DRAM bank reporting   David Lechner
• [PATCH] arm: mediatek: mt7988: restore full DRAM bank reporting   David Lechner
• [PATCH] arm: mediatek: mt7988: restore full DRAM bank reporting   David Lechner
• [PATCH 1/4] imx9: scmi: Fix temperature range for Extended industrial parts   Ye Li
• [PATCH 2/4] imx9: scmi: Print CPU part number name   Ye Li
• [PATCH 3/4] iMX9: scmi: Disable fused modules for iMX95/94/952   Ye Li
• [PATCH 4/4] nxp: imx[95,94,952]_evk: Implement board_fix_fdt   Ye Li
• [PATCH resend 1/2] cpu: imx8_cpu: Add iMX8MP UltraLite Part cpu type   Ye Li
• [PATCH resend 2/2] cpu: imx8_cpu: fix the mpidr check   Ye Li
• TZASC misconfiguration on i.mx8m   Ye Li
• TZASC misconfiguration on i.mx8m   Ye Li
• [PATCH] power: domain: scmi: Allow failure in getting power domain attribute   Ye Li
• TZASC misconfiguration on i.mx8m   Ye Li
• TZASC misconfiguration on i.mx8m   Ye Li
• [PATCH v3 0/7] socfpga: n5x: Update Boot Support for N5X   Chen Huei Lok
• [PATCH v3 1/7] configs: socfpga: n5x: consolidate ATF defconfig and simplify VAB   Chen Huei Lok
• [PATCH v3 2/7] arm: dts: socfpga: n5x: update GMAC nodes and DT register settings   Chen Huei Lok
• [PATCH v3 3/7] configs: socfpga: n5x: enable CMD_MTD   Chen Huei Lok
• [PATCH v3 4/7] configs: socfpga: n5x: enable ISSI QSPI   Chen Huei Lok
• [PATCH v3 5/7] arm: socfpga: n5x: switch firewall setup to driver model   Chen Huei Lok
• [PATCH v3 6/7] arch: arm: dts: n5x: switch to using upstream Linux DT config   Chen Huei Lok
• [PATCH v3 7/7] arm: socfpga: n5x: update SPL data save and restore implementation   Chen Huei Lok
• [PATCH v5] drivers: fpga: Use FPGA_INTEL_SDM_MAILBOX conditional instead of Agilex/Stratix10   Chen Huei Lok
• [PATCH 0/2] TI: AM64-EVM/SK: Enable MAIN UART1 for SYSFW tracing   Vishal Mahaveer
• [PATCH 1/2] arm: mach-k3: am642: Update MAIN UART1 serial alias from 3 to 1   Vishal Mahaveer
• [PATCH 2/2] arm: dts: k3-am642-evm/sk: enable MAIN UART1 for SYSFW logs   Vishal Mahaveer
• [EXT] Re: TZASC misconfiguration on i.mx8m   Sahil Malhotra
• [PATCH v8 01/15] ecdsa: fix support of secp521r1   Raymond Mao
• [PATCH v8 02/15] mbedtls: enable support of ecc   Raymond Mao
• [PATCH v8 03/15] ecdsa: initial support of ecdsa using mbedtls   Raymond Mao
• [PATCH v8 06/15] test: dm: ecdsa.c: clean this test as software ecdsa is now implemented   Raymond Mao
• [PATCH] smbios: Fix wrong sysinfo ID for Type 3 enclosure asset tag   Raymond Mao
• [PATCH] mmc: sd: Handle UHS-I voltage signaling without power cycle   Judith Mendez
• [PATCH V3] board: rockchip: add Anbernic RG-DS   Chris Morgan
• [PATCH v1] i2c: geni: reset controller on NACK to recover from invalid bus state   Aswin Murugan
• [PATCH v4 00/13] Qualcomm IPQ5210 SoC bringup   Varadarajan Narayanan
• [PATCH v4 01/13] binman: Ignore noload segments for image numbering   Varadarajan Narayanan
• [PATCH v4 02/13] binman: qcom: Add type definitions for Qualcomm binaries   Varadarajan Narayanan
• [PATCH v4 03/13] dts: ipq5210-rdp504-u-boot: add override dtsi   Varadarajan Narayanan
• [PATCH v4 04/13] clk/qcom: add initial clock driver for ipq5210   Varadarajan Narayanan
• [PATCH v4 05/13] pinctrl: qcom: Add ipq5210 pinctrl driver   Varadarajan Narayanan
• [PATCH v4 06/13] misc: qcom_geni: Add minicore support   Varadarajan Narayanan
• [PATCH v4 07/13] mach-snapdragon: Add PBL shared data defines   Varadarajan Narayanan
• [PATCH v4 08/13] spl: Include SMEM driver in SPL   Varadarajan Narayanan
• [PATCH v4 09/13] mach-snapdragon: Add initial support for IPQ5210 SPL   Varadarajan Narayanan
• [PATCH v4 10/13] mach-snapdragon: spl: Update SMEM with boot details   Varadarajan Narayanan
• [PATCH v4 11/13] mach-snapdragon: Add commands to create wrapper ELF   Varadarajan Narayanan
• [PATCH v4 12/13] configs: add qcom_ipq5210_mmc_defconfig   Varadarajan Narayanan
• [PATCH v4 13/13] doc: board/qualcomm: Update RDP build instructions   Varadarajan Narayanan
• [PATCH v6 0/7] Improve FIT signature handling   Ludwig Nussel
• [PATCH v6 1/7] qemu-arm64: merge built-in DT   Ludwig Nussel
• [PATCH v6 2/7] mkimage: define log_err and log_info   Ludwig Nussel
• [PATCH v6 3/7] image-fit-sig: Optionally require signatures   Ludwig Nussel
• [PATCH v6 4/7] test: vboot: handle CONFIG_FIT_REQUIRE_CONFIG_SIGS in test_vboot   Ludwig Nussel
• [PATCH v6 5/7] iminfo: also verify signatures   Ludwig Nussel
• [PATCH v6 6/7] test: vboot: refactor run_bootm   Ludwig Nussel
• [PATCH v6 7/7] test: vboot: add iminfo checks   Ludwig Nussel
• [PATCH] xyz-modem: Select CRC16   Daniel Palmer
• [PATCH v2] xyz-modem: Select CRC16   Daniel Palmer
• [PATCH v2] xyz-modem: Select CRC16   Daniel Palmer
• [PATCH v2] xyz-modem: Select CRC16   Daniel Palmer
• J721E A/B boot with tiboot3 in eMMC boot0 and remaining firmware in UDA   Patryk
• PATCH mmc: sunxi: fix MACH_SUN9I typo in get_mclk_offset()   Andre Przywara
• PATCH mmc: sunxi: fix MACH_SUN9I typo in get_mclk_offset()   Andre Przywara
• [PATCH 0/2] Add gpio configuration support for Qualcomm Snapdragon platform   Petr Hodina via B4 Relay
• [PATCH 1/2] gpio: qcom_pmic_gpio: implement standard pinconf parameters   Petr Hodina via B4 Relay
• [PATCH 2/2] gpio: qcom_pmic_gpio: don't reset pull on direction change   Petr Hodina via B4 Relay
• [PATCH v2] gpio: qcom_spmi_gpio: move PM8998 GPIO from legacy pmic driver   Petr Hodina via B4 Relay
• [PATCHSET PATCH 0/6] UFS-TOOL   Raz Ben Yehuda via B4 Relay
• [PATCH PATCHSET 1/6] MAINTAINERS: Add myself to the list of UFS maintainers   Raz Ben Yehuda via B4 Relay
• [PATCH PATCHSET 2/6] ufs: add UFS descriptor/configuration utility support   Raz Ben Yehuda via B4 Relay
• [PATCH PATCHSET 3/6] ufs: Expose selected UFS functions   Raz Ben Yehuda via B4 Relay
• [PATCH PATCHSET 4/6] ufs: ufs tool   Raz Ben Yehuda via B4 Relay
• [PATCH PATCHSET 5/6] ufs: add ufs_tool to Kconfig and Makefile   Raz Ben Yehuda via B4 Relay
• [PATCH PATCHSET 6/6] ufs: doc/usage/cmd/ufs.rst   Raz Ben Yehuda via B4 Relay
• [PATCH v2 0/5] ufs: Exted cmd line   Raz Ben Yehuda via B4 Relay
• [PATCH v2 1/5] ufs: Expose selected UFS functions   Raz Ben Yehuda via B4 Relay
• [PATCH v2 2/5] ufs: Add flags according   Raz Ben Yehuda via B4 Relay
• [PATCH v2 3/5] ufs: extending ufs cmd line   Raz Ben Yehuda via B4 Relay
• [PATCH v2 4/5] ufs: document the UFS command   Raz Ben Yehuda via B4 Relay
• [PATCH v2 5/5] MAINTAINERS: Add myself to the list of UFS maintainers   Raz Ben Yehuda via B4 Relay
• [PATCH v3 0/5] (no cover subject)   Raz Ben Yehuda via B4 Relay
• [PATCH v3 1/5] ufs: Expose selected UFS functions   Raz Ben Yehuda via B4 Relay
• [PATCH v3 2/5] ufs: Add flags according   Raz Ben Yehuda via B4 Relay
• [PATCH v3 3/5] ufs: extending ufs cmd line   Raz Ben Yehuda via B4 Relay
• [PATCH v3 4/5] ufs: document the UFS command   Raz Ben Yehuda via B4 Relay
• [PATCH v3 5/5] MAINTAINERS: Add myself to the list of UFS maintainers   Raz Ben Yehuda via B4 Relay
• [PATCH RESEND 00/16] MSM8960 / mach-snapdragon ARMv7 support   Sam Day via B4 Relay
• [PATCH RESEND 01/16] serial: msm: UARTDM <1.4 support   Sam Day via B4 Relay
• [PATCH RESEND 02/16] timer: Qualcomm KPSS timer support   Sam Day via B4 Relay
• [PATCH RESEND 03/16] arm: save_prev_bl_data: ARM32 support   Sam Day via B4 Relay
• [PATCH RESEND 04/16] mach-snapdragon: qcom_parse_memory 32-bit support   Sam Day via B4 Relay
• [PATCH RESEND 05/16] mach-snapdragon: gate ARM64 features   Sam Day via B4 Relay
• [PATCH RESEND 06/16] mach-snapdragon: introduce ARCH_SNAPDRAGON_ARM32   Sam Day via B4 Relay
• [PATCH RESEND 07/16] configs: introduce qcom_armv7_defconfig   Sam Day via B4 Relay
• [PATCH RESEND 08/16] board: qualcomm: add MSM8960 debug UART config   Sam Day via B4 Relay
• [PATCH RESEND 09/16] sysreset: qcom-pshold: offset support   Sam Day via B4 Relay
• [PATCH RESEND 10/16] pinctrl: qcom: configurable GPIO offset/stride   Sam Day via B4 Relay
• [PATCH RESEND 11/16] pinctrl: qcom: introduce MSM8960 driver   Sam Day via B4 Relay
• [PATCH RESEND 12/16] mach-snapdragon: parse incoming ARM32 ATAGS   Sam Day via B4 Relay
• [PATCH RESEND 13/16] clk: qcom: MSM8960 GCC driver   Sam Day via B4 Relay
• [PATCH RESEND 14/16] clk: qcom: arch-agnostic pointer fmtstrings   Sam Day via B4 Relay
• [PATCH RESEND 15/16] serial: msm: wait for TX empty before reinit   Sam Day via B4 Relay
• [PATCH RESEND 16/16] button: remap phone HOMEPAGE button   Sam Day via B4 Relay
• [PATCH v2 0/6] MSM8916: Bring secondary cores online with spin-table   Sam Day via B4 Relay
• [PATCH v2 1/6] armv8: spin_table: Fix missing includes   Sam Day via B4 Relay
• [PATCH v2 2/6] armv8: spin_table: add hook for booting cores   Sam Day via B4 Relay
• [PATCH v2 3/6] firmware: Add qcom SCM driver   Sam Day via B4 Relay
• [PATCH v2 4/6] mach-snapdragon: fixup CPUs with PSCI enable-method   Sam Day via B4 Relay
• [PATCH v2 5/6] mach-snapdragon: MSM8916 spin-table CPU boot support   Sam Day via B4 Relay
• [PATCH v2 6/6] qcom_defconfig: enable spin-table support   Sam Day via B4 Relay
• [PATCH 0/2] Fastboot abort key support   Sam Day via B4 Relay
• [PATCH 1/2] cmd: fastboot: Add keyed abort option   Sam Day via B4 Relay
• [PATCH 2/2] board: qualcomm: phone: enable CMD_FASTBOOT_ABORT_KEYED   Sam Day via B4 Relay
• [PATCH] mach-snapdragon: formalize APQ8016 debug UART init   Sam Day via B4 Relay
• [PATCH 00/13] Generate Android boot images with binman   Sam Day via B4 Relay
• [PATCH 01/13] binman: Android boot image support   Sam Day via B4 Relay
• [PATCH 02/13] .gitignore: ignore binman-generated blobs   Sam Day via B4 Relay
• [PATCH 03/13] arch: arm: qcom: google-sargo binman config   Sam Day via B4 Relay
• [PATCH 04/13] qcom: arch: arm: qcom: sdm845-fajita binman configs   Sam Day via B4 Relay
• [PATCH 05/13] mach-snapdragon: enable BINMAN   Sam Day via B4 Relay
• [PATCH 06/13] binman: android_boot: vendor-dt support   Sam Day via B4 Relay
• [PATCH 07/13] binman: Add QCDT support   Sam Day via B4 Relay
• [PATCH 08/13] binman: android_boot: SEANDROIDENFORCE support   Sam Day via B4 Relay
• [PATCH 09/13] arch: arm: qcom: samsung-a5u-eur binman config   Sam Day via B4 Relay
• [PATCH 10/13] arch: arm: qcom: samsung-gt510 binman config   Sam Day via B4 Relay
• [PATCH 11/13] binman: Add DTBH support   Sam Day via B4 Relay
• [PATCH 12/13] arch: arm: exynos: add j7xelte binman config   Sam Day via B4 Relay
• [PATCH 13/13] configs: exynos-mobile: pull in BINMAN   Sam Day via B4 Relay
• [PATCH 00/11] PM8916 PON support   Sam Day via B4 Relay
• [PATCH 01/11] button: qcom-pmic: introduce exported setup method   Sam Day via B4 Relay
• [PATCH 02/11] drivers: misc: pm8916_pon: add glue driver   Sam Day via B4 Relay
• [PATCH 03/11] qcom_defconfig: enable PM8916_PON   Sam Day via B4 Relay
• [PATCH 04/11] drivers: misc: pm8916_pon: support setting reboot type   Sam Day via B4 Relay
• [PATCH 05/11] sysreset: qcom-pshold: PM8916 PON reset type support   Sam Day via B4 Relay
• [PATCH 06/11] qcom_defconfig: enable poweroff command   Sam Day via B4 Relay
• [PATCH 07/11] reboot-mode: pm8916-pon: add new driver   Sam Day via B4 Relay
• [PATCH 08/11] mach-snapdragon: Integrate reboot-mode handling   Sam Day via B4 Relay
• [PATCH 09/11] reboot-mode: reboot method activation support   Sam Day via B4 Relay
• [PATCH 10/11] fastboot: DM_REBOOT_MODE reset support   Sam Day via B4 Relay
• [PATCH 11/11] qcom_defconfig: enable reboot modes   Sam Day via B4 Relay
• [PATCH v2 0/8] Generate Android boot images with binman   Sam Day via B4 Relay
• [PATCH v2 1/8] binman: Android boot image support   Sam Day via B4 Relay
• [PATCH v2 2/8] .gitignore: ignore binman-generated blobs   Sam Day via B4 Relay
• [PATCH v2 3/8] binman: android_boot: vendor-dt support   Sam Day via B4 Relay
• [PATCH v2 4/8] binman: Add QCDT support   Sam Day via B4 Relay
• [PATCH v2 5/8] binman: android_boot: SEANDROIDENFORCE support   Sam Day via B4 Relay
• [PATCH v2 6/8] binman: Add DTBH support   Sam Day via B4 Relay
• [PATCH v2 7/8] arch: arm: exynos: add j7xelte binman config   Sam Day via B4 Relay
• [PATCH v2 8/8] configs: exynos-mobile: pull in BINMAN   Sam Day via B4 Relay
• [PATCH v3 00/10] Generate Android boot images with binman   Sam Day via B4 Relay
• [PATCH v3 01/10] binman: support running multiple tests   Sam Day via B4 Relay
• [PATCH v3 02/10] binman: test name globbing support   Sam Day via B4 Relay
• [PATCH v3 03/10] binman: section: add AlignUp+PadToAlignment helpers   Sam Day via B4 Relay
• [PATCH v3 04/10] binman: Android boot image support   Sam Day via B4 Relay
• [PATCH v3 05/10] .gitignore: ignore binman-generated blobs   Sam Day via B4 Relay
• [PATCH v3 06/10] binman: android_boot: vendor-dt support   Sam Day via B4 Relay
• [PATCH v3 07/10] binman: Add QCDT support   Sam Day via B4 Relay
• [PATCH v3 08/10] binman: Add DTBH support   Sam Day via B4 Relay
• [PATCH v3 09/10] arch: arm: exynos: add j7xelte binman config   Sam Day via B4 Relay
• [PATCH v3 10/10] configs: exynos-mobile: pull in binman   Sam Day via B4 Relay
• [PATCH v2] mach-snapdragon: formalize APQ8016 debug UART init   Sam Day via B4 Relay
• [PATCH v7 01/15] ecdsa: fix support of secp521r1   Philippe Reynes
• [PATCH v8 00/15] add software ecdsa support   Philippe Reynes
• [PATCH v8 01/15] ecdsa: fix support of secp521r1   Philippe Reynes
• [PATCH v8 02/15] mbedtls: enable support of ecc   Philippe Reynes
• [PATCH v8 03/15] ecdsa: initial support of ecdsa using mbedtls   Philippe Reynes
• [PATCH v8 04/15] test: lib: ecdsa: add initial test   Philippe Reynes
• [PATCH v8 05/15] drivers: crypto: add software ecdsa support   Philippe Reynes
• [PATCH v8 06/15] test: dm: ecdsa.c: clean this test as software ecdsa is now implemented   Philippe Reynes
• [PATCH v8 07/15] test: py: vboot: prepare integration test for ecdsa   Philippe Reynes
• [PATCH v8 08/15] test: vboot: add test for ecdsa   Philippe Reynes
• [PATCH v8 09/15] tools: fit_image_setup_sig: set required_keynode to -1   Philippe Reynes
• [PATCH v8 10/15] tools: mkimage: pre-load: add support of ecdsa   Philippe Reynes
• [PATCH v8 11/15] tools: binman: pre-load: add support of ecdsa   Philippe Reynes
• [PATCH v8 12/15] boot: pre-load: add support of ecdsa   Philippe Reynes
• [PATCH v8 13/15] tools: preload_check_sign: add support of ecdsa   Philippe Reynes
• [PATCH v8 14/15] test: py: vboot: prepare test for global signature with ecdsa   Philippe Reynes
• [PATCH v8 15/15] test: py: vboot: add test for global signature with ecdsa   Philippe Reynes
• [PATCH 03/20] board: ti: j721e: Add resume detection for J721e/J7200   Thomas Richard
• [PATCH 1/1] fdt: fix condition for devicetree from bloblist   Tom Rini
• [PATCH 1/1] fdt: fix condition for devicetree from bloblist   Tom Rini
• [PATCH v3 0/5] NBX10G: Marvell Armada 8040 Nodebox 10G board support   Tom Rini
• [PATCH v2 0/3] Clean up bloblist initialization   Tom Rini
• [PATCHv8 0/3] various memory related fixups   Tom Rini
• [PATCH] timer: sp804: Fix dev_read_addr error check   Tom Rini
• [PATCH 0/4] Enable splashscreen functionality on AM62X   Tom Rini
• [PULL] u-boot-usb/master   Tom Rini
• [PULL] u-boot-sh/master   Tom Rini
• [PATCH] tests: fs_helper: check path validity during cleanup   Tom Rini
• [PATCH] Makefile: fix extra dash in KBUILD_CFLAGS   Tom Rini
• [PATCH v2] .gitignore: exclude logo generated file   Tom Rini
• [PATCHv8 0/3] various memory related fixups   Tom Rini
• [PULL] u-boot-usb/next   Tom Rini
• Please pull net-next-20260603   Tom Rini
• Please pull net-20260603   Tom Rini
• [PATCH v2 0/6] arm: omap: Add back omap4 support   Tom Rini
• Pull request: rpi-2026.07 rc4   Tom Rini
• [PATCH v1] lmb: Optionally limit available memory to 4 GiB on limited systems   Tom Rini
• [PATCH 0/7] pxe_utils: small fixups, implement BLS type 1 boot on top of them   Tom Rini
• [PATCH 1/7] pxe_utils: fix W=1 kernel-doc warnings   Tom Rini
• [PATCH 2/7] pxe_utils: accept "options" as synonym for "append"   Tom Rini
• [PATCH 3/7] pxe_utils: extract per-entry key parsing into parse_label_keys()   Tom Rini
• [PATCH] arch: arm: force 4K page alignment in linker   Tom Rini
• [GIT PULL] Please pull u-boot-nvme-fixes-20260604   Tom Rini
• [PATCH 0/7] pxe_utils: small fixups, implement BLS type 1 boot on top of them   Tom Rini
• [PATCH v2 0/6] arm: omap: Add back omap4 support   Tom Rini
• [PATCH 0/3] Cleanup some linker list usage issues   Tom Rini
• [PATCH v6 00/16] sc5xx Environment Cleanup and Fixes   Tom Rini
• [PATCH v5 1/7] treewide: move bi_dram[] from bd to gd   Tom Rini
• [PATCH v3 0/8] rtc: pcf85036: improve spec coherence and extend features   Tom Rini
• [GIT PULL] Please pull u-boot-imx-master-20260604   Tom Rini
• [GIT PULL] Please pull u-boot-imx-next-20260605   Tom Rini
• [PATCH v1] doc: clean up README.rockchip   Tom Rini
• [PATCH v1] Kconfig: replace deprecated help word   Tom Rini
• [PATCH] xyz-modem: Select CRC16   Tom Rini
• [PATCH 3/5] x86: edison: Align U-Boot via binman to fix the boot   Tom Rini
• [PATCH 3/5] x86: edison: Align U-Boot via binman to fix the boot   Tom Rini
• [PATCH v2] xyz-modem: Select CRC16   Tom Rini
• [RFC PATCH 0/3] boot/fit: fix CVE-2021-27138 while keeping '@' node names   Tom Rini
• [PATCH 00/13] Generate Android boot images with binman   Tom Rini
• [PATCH v7 1/6] config.mk: support vendor generic includes   Tom Rini
• [PATCH v7 5/6] mach-snapdragon: add kconfig infra for building MBN files   Tom Rini
• [PATCH v2] xyz-modem: Select CRC16   Tom Rini
• [GIT PULL] amd/xilinx patches for v2025.10-rc1 v2   Tom Rini
• [PATCH v3 1/5] ufs: Expose selected UFS functions   Tom Rini
• [PATCH v3 3/5] ufs: extending ufs cmd line   Tom Rini
• [PATCH v3 0/5] (no cover subject)   Tom Rini
• PATCH mmc: sunxi: fix MACH_SUN9I typo in get_mclk_offset()   Tom Rini
• [PATCH] lmb: Rename LMB_LIMIT_DMA_BELOW_4G to LMB_LIMIT_DMA_BELOW_RAM_TOP   Tom Rini
• [PATCH] smbios: Fix wrong sysinfo ID for Type 3 enclosure asset tag   Tom Rini
• [ANN] U-Boot v2026.07-rc4 released   Tom Rini
• [PATCH 0/4] mailbox: mpfs-mbox: fixes and syscon support   Tom Rini
• Binman with Qualcomm   Tom Rini
• [PATCH v5 1/7] treewide: move bi_dram[] from bd to gd   Tom Rini
• [PATCH v1 1/8] Kconfig: armv7: fix typo   Tom Rini
• [PATCH v1 2/8] Kconfig: powerpc: mpc85xx: fix typo   Tom Rini
• [PATCH v1 3/8] Kconfig: power: pmic: fix typo   Tom Rini
• [PATCH v1 4/8] Kconfig: themal: fix typo   Tom Rini
• [PATCH v1 5/8] Kconfig: misc: add empty line   Tom Rini
• [PATCH v1 6/8] Kconfig: arm: restyle   Tom Rini
• [PATCH v1 7/8] Kconfig: arch: restyle   Tom Rini
• [PATCH v1 8/8] Kconfig: board: restyle   Tom Rini
• [PATCH] CI: Sage: Pin to labgrid 25.0.1   Tom Rini
• [PATCH v2 0/7] ti: j7: Update to v0.12.0 of DDR config tool   Tom Rini
• Pull request efi-2026-07-rc5   Tom Rini
• [PATCH] CI: Sage: Pin to labgrid 25.0.1   Tom Rini
• Please pull u-boot-watchdog/next   Tom Rini
• [PATCH 0/5] clk: Use device API to replace devfdt_ helpers   Tom Rini
• [PATCH 1/2] pinctrl: at91: Use dev_read_addr_index()   Tom Rini
• [PATCH 1/2] gpio: nx: Use dev_remap_addr()   Tom Rini
• [PATCH 1/2] remoteproc: pru: Use dev_read_addr_size_index()   Tom Rini
• [PATCH 1/2] crypto: aspeed: Use dev_read_addr_x()   Tom Rini
• [PATCH] ram: aspeed: Use dev_read_addr_x() API   Tom Rini
• [PATCH] reset: ast: Use dev_read_addr_ptr()   Tom Rini
• [PATCH] thermal: ti-bandgap: Use dev_read_addr_index()   Tom Rini
• [PATCH] misc: k3_avs: Use dev_read_addr_index()   Tom Rini
• [PATCH] rng: rproc_rng200: Use dev_remap_addr()   Tom Rini
• [PATCH 1/2] ata: mtk_ahci: Use dev_remap_addr_index() and ofnode API   Tom Rini
• [PATCH] [RFC] lmb: Optionally limit available memory to 4 GiB on limited systems   Peter Robinson
• [PATCH] [RFC] lmb: Optionally limit available memory to 4 GiB on limited systems   Peter Robinson
• [PATCH] [RFC] lmb: Optionally limit available memory to 4 GiB on limited systems   Peter Robinson
• Pull request: rpi-2026.07 rc4   Peter Robinson
• [PATCH v3 0/5] NBX10G: Marvell Armada 8040 Nodebox 10G board support   Stefan Roese
• [PATCH v3 0/5] NBX10G: Marvell Armada 8040 Nodebox 10G board support   Stefan Roese
• [PATCH] watchdog: Correct dependencies for WDT_MAX6370   Stefan Roese
• [PATCH RESEND] watchdog: sbsa_gwdt: clamp WOR value to hw max   Stefan Roese
• [PATCH RESEND] watchdog: octeontx_wdt: fix DT matches to Marvell compatibles   Stefan Roese
• [PATCH] doc: wdt: fix typo for expire   Stefan Roese
• [PATCH 1/3] watchdog: orion_wdt: use dev_read_addr_size_index()   Stefan Roese
• [PATCH 2/3] watchdog: rti: Use dev_read_addr_ptr()   Stefan Roese
• [PATCH 3/3] watchdog: mpc8xxx_wdt: Use dev_remap_addr()   Stefan Roese
• [PATCH v2] drivers: watchdog: Fix dev_read_addr error check   Stefan Roese
• [PATCH] watchdog: Correct dependencies for WDT_MAX6370   Stefan Roese
• [PATCH RESEND] watchdog: sbsa_gwdt: clamp WOR value to hw max   Stefan Roese
• [PATCH RESEND] watchdog: octeontx_wdt: fix DT matches to Marvell compatibles   Stefan Roese
• [PATCH] doc: wdt: fix typo for expire   Stefan Roese
• [PATCH 1/3] watchdog: orion_wdt: use dev_read_addr_size_index()   Stefan Roese
• [PATCH 2/3] watchdog: rti: Use dev_read_addr_ptr()   Stefan Roese
• [PATCH 3/3] watchdog: mpc8xxx_wdt: Use dev_remap_addr()   Stefan Roese
• [PATCH v2] drivers: watchdog: Fix dev_read_addr error check   Stefan Roese
• Please pull u-boot-watchdog/next   Stefan Roese
• No subject   Stefan Roese
• [PATCH] net: clear IP defragmentation state after returning a complete packet   Alessandro Rubini
• [PATCH 0/4] Add U-Boot support for Qualcomm IPQ9650 SoC   Badhrinath S
• [PATCH 1/4] clk: qcom: Add initial Clock driver for ipq9650   Badhrinath S
• [PATCH 2/4] pinctrl: qcom: Add ipq9650 pinctrl driver   Badhrinath S
• [PATCH 3/4] arm: dts: ipq9650: Add override dtsi   Badhrinath S
• [PATCH 4/4] configs: Add defconfig for ipq9650 RDP488   Badhrinath S
• [PATCH v2 0/4] Add U-Boot support for Qualcomm IPQ9650 SoC   Badhrinath S
• [PATCH v2 1/4] clk: qcom: Add initial Clock driver for ipq9650   Badhrinath S
• [PATCH v2 2/4] pinctrl: qcom: Add ipq9650 pinctrl driver   Badhrinath S
• [PATCH v2 3/4] arm: dts: ipq9650: Add override dtsi   Badhrinath S
• [PATCH v2 4/4] configs: Add defconfig for ipq9650 RDP488   Badhrinath S
• [PATCH v2 0/4] Add U-Boot support for Qualcomm IPQ9650 SoC   Badhrinath S
• [PATCH v2 1/4] clk: qcom: Add initial Clock driver for ipq9650   Badhrinath S
• [PATCH v2 2/4] pinctrl: qcom: Add ipq9650 pinctrl driver   Badhrinath S
• [PATCH v2 3/4] arm: dts: ipq9650: Add override dtsi   Badhrinath S
• [PATCH v2 4/4] configs: Add defconfig for ipq9650 RDP488   Badhrinath S
• [PATCH v2] arm: dts: ipq5424-rdp466: add chosen node for serial console   Gurumoorthy Santhakumar
• [PATCH v1] misc: qcom-geni: add DM_FLAG_PRE_RELOC to geni-se-qup driver   Gurumoorthy Santhakumar
• [PATCHv8 0/3] various memory related fixups   Randolph Sapp
• [PATCHv8 0/3] various memory related fixups   Randolph Sapp
• [PATCH 1/4] bootm: fix flush_cache() with IH_TYPE_KERNEL_NOLOAD   Nora Schiffer
• [PATCH 2/4] bootm: use CONFIG_SYS_BOOTM_LEN for IH_TYPE_KERNEL_NOLOAD decompression buffer   Nora Schiffer
• [PATCH 3/4] bootm: warn about load address for IH_TYPE_KERNEL_NOLOAD in FIT   Nora Schiffer
• [PATCH 4/4] bootm: allow omitting entry point for IH_TYPE_KERNEL_NOLOAD   Nora Schiffer
• [PATCH 0/4] arm: mach-k3: Add DM firmware memory fixup   Markus Schneider-Pargmann
• [PATCH v1] i2c: geni: reset controller on NACK to recover from invalid bus state   Heiko Schocher
• [PATCH] i2c: designware: fix i2c probe error   Heiko Schocher
• [PATCH 1/2] mtd: spinand: core: fix Winbond W25N bad block marker (1 byte BBM)   Frieder Schrempf
• [PATCH v3 1/1] efi_loader: validate PE-COFF relocation data   Heinrich Schuchardt
• Re: [PATCH v4 13/13] doc: board/qualcomm: Update RDP build instructions   Heinrich Schuchardt
• Pull request efi-2026-07-rc5   Heinrich Schuchardt
• [PATCH v5] tools: mkeficapsule: Rework pkcs11 support   Quentin Schulz
• [PATCH v6] tools: mkeficapsule: Rework pkcs11 support   Quentin Schulz
• [PATCH v2] xyz-modem: Select CRC16   Quentin Schulz
• [PATCH v2] xyz-modem: Select CRC16   Quentin Schulz
• [PATCH v6 3/5] sysreset: Implement PSCI based reset to EDL mode for QCOM SoCs   Quentin Schulz
• [PATCH v2] xyz-modem: Select CRC16   Quentin Schulz
• [PATCH v2] xyz-modem: Select CRC16   Quentin Schulz
• [PATCH v2 00/14] spl: ufs: add UFS boot support for Qualcomm Snapdragon in SPL   Balaji Selvanathan
• [PATCH v2 01/14] spl: ufs: rename SPL_UFS_SUPPORT config to SPL_UFS   Balaji Selvanathan
• [PATCH v2 02/14] spl: ufs: add Kconfig choice for U-Boot location method   Balaji Selvanathan
• [PATCH v2 03/14] spl: ufs: add partition-based U-Boot loading support   Balaji Selvanathan
• [PATCH v2 04/14] spl: ufs: add SPL_UFS_FS Kconfig and filesystem boot stub   Balaji Selvanathan
• [PATCH v2 05/14] part: enable part_get_info_ptr for SPL UFS partition boot   Balaji Selvanathan
• [PATCH v2 06/14] spl: add UFS boot mode defines to spl.h   Balaji Selvanathan
• [PATCH v2 07/14] ufs: qcom: add SPL_UFS_QCOM Kconfig and SPL build support   Balaji Selvanathan
• [PATCH v2 08/14] phy: qcom: add SPL_PHY_QCOM_QMP_UFS for SPL UFS boot   Balaji Selvanathan
• [PATCH v2 09/14] clk: stub: Add Kconfig option for SPL stub driver   Balaji Selvanathan
• [PATCH v2 10/14] lib: update charset.o build rule to use SPL_UFS   Balaji Selvanathan
• [PATCH v2 11/14] misc: qcom_geni: add SPL support for Qualcomm GENI driver   Balaji Selvanathan
• [PATCH v2 12/14] pinctrl: qcom: add SPL support for Qualcomm pinctrl drivers   Balaji Selvanathan
• [PATCH v2 13/14] serial: msm: add SPL support for Qualcomm serial drivers   Balaji Selvanathan
• [PATCH v2 14/14] power: spmi: use $(PHASE_) macro for Qualcomm PMIC and SPMI   Balaji Selvanathan
• [PATCH 0/2] Add U-Boot SPL support for Lemans EVK   Balaji Selvanathan
• [PATCH 1/2] arm: dts: qcom: Add Lemans EVK U-Boot DTS overlay for SPL   Balaji Selvanathan
• [PATCH 2/2] configs: qcom: Add qcom_lemans_spl_defconfig for Lemans EVK   Balaji Selvanathan
• [PATCH v2 0/6] arm: snapdragon: Add snagboot support for Lemans-EVK   Balaji Selvanathan
• [PATCH v2 1/6] arm: snapdragon: Make SYSRESET_PSCI optional   Balaji Selvanathan
• [PATCH v2 2/6] arm: snapdragon: Guard PSCI functions with CONFIG_ARM_SMCCC   Balaji Selvanathan
• [PATCH v2 3/6] arm: snapdragon: Disable MMU early before U-Boot reset vector   Balaji Selvanathan
• [PATCH v2 4/6] soc: qcom: cmd-db: Allow boot without CMD DB data   Balaji Selvanathan
• [PATCH v2 5/6] configs: add qcom_lemans_snagboot_defconfig for Lemans-EVK   Balaji Selvanathan
• [PATCH v2 6/6] MAINTAINERS: add qcom_lemans_snagboot_defconfig to ARM SNAPDRAGON   Balaji Selvanathan
• [PATCH] dwc3: Fix fastboot re-run failure with flat DTS   Balaji Selvanathan
• [PATCH v4] Add support for OpenSSL Provider API   Enric Balletbo i Serra
• [PATCH v3 2/2] BeaglePlay: enable IT66121 HDMI bridge and video stack   Moteen Shah
• [PATCH v3 2/2] BeaglePlay: enable IT66121 HDMI bridge and video stack   Moteen Shah
• [PATCH] rockchip: boot_mode: fix download key detection   Tianling Shen
• Flashing Edison   Andy Shevchenko
• Flashing Edison   Andy Shevchenko
• [PATCH 1/5] binman: Add an entry type for the Intel OSIP header   Andy Shevchenko
• [PATCH 2/5] edison: Widen the DFU auto-probe window for flashing U-Boot   Andy Shevchenko
• [PATCH 3/5] x86: edison: Align U-Boot via binman to fix the boot   Andy Shevchenko
• [PATCH 3/5] x86: edison: Align U-Boot via binman to fix the boot   Andy Shevchenko
• [PATCH 0/5] edison: Fix mainline boot and convert the image to binman   Andy Shevchenko
• [PATCH 5/5] doc: edison: Rewrite the update instructions   Andy Shevchenko
• Flashing Edison   Andy Shevchenko
• [PATCH] xilinx: zynqmp: Fix snprintf invalid size argument   Michal Simek
• [PATCH] xilinx: versal: Fix snprintf invalid size argument   Michal Simek
• mkimage: allow zynqmp to use a register initialization file   Michal Simek
• [PATCH v2 0/5] mtd: rawnand: zynq: Fixes and software ECC support   Michal Simek
• mkimage: allow zynqmp to use a register initialization file   Michal Simek
• [PATCH] mkimage: allow zynqmpbif to use a register initialization file   Michal Simek
• [PATCH v4] drivers: fpga: Use FPGA_INTEL_SDM_MAILBOX conditional instead of Agilex/Stratix10   Michal Simek
• [PATCH v2] riscv: Skip riscv_cpu_setup() when CPU driver is disabled   Michal Simek
• [PATCH v3 1/2] riscv: Make RISCV_ACLINT visible   Michal Simek
• [PATCH v4 0/5] reset: Introduce reset_reset.*() API   Michal Simek
• [GIT PULL] amd/xilinx patches for v2025.10-rc1 v2   Michal Simek
• [PATCH 0/9] arm64: zynqmp: DT updates   Michal Simek
• [PATCH 1/9] arm64: zynqmp-dlc21-revA: Update GPIO line names mapping   Michal Simek
• [PATCH 2/9] arm64: zynqmp-dlc21-revA: add mac nvmem cell for gem0   Michal Simek
• [PATCH 3/9] arm64: zynqmp: Drop incorrect #phy-cells from ethernet-phy nodes   Michal Simek
• [PATCH 4/9] arm64: zynqmp: Use fixed-partitions for MTD   Michal Simek
• [PATCH 5/9] arm64: zynqmp: Add CMA reserved-memory for runtime FPGA loading   Michal Simek
• [PATCH 6/9] arm64: zynqmp: add USB hub supply regulators   Michal Simek
• [PATCH 7/9] arm64: zynqmp: dts: Fix file descriptions to match actual filenames   Michal Simek
• [PATCH 8/9] arm64: dts: xilinx: Drop "label" property on dlg, slg7xl45106   Michal Simek
• [PATCH 9/9] arm64: zynqmp: Sync compatible string format   Michal Simek
• [PATCH RESEND 00/16] MSM8960 / mach-snapdragon ARMv7 support   Antony Kurniawan Soemardi
• [PATCH 0/2] efi: fix block io revision and test   Vincent Stehlé
• [PATCH 1/2] lib/efi_loader: fix block io revision   Vincent Stehlé
• [PATCH 2/2] lib/efi_selftest: test block io revision   Vincent Stehlé
• [PATCH 1/1] fdt: fix condition for devicetree from bloblist   Alexander Stein
• [PATCH 1/2] usb: usb_onboard_hub: add support for TI TUSB8041   Alexander Stein
• [PATCH 2/2] usb: usb_onboard_hub: add support for USB2517 hub   Alexander Stein
• [PATCH 1/1] net: phy: dp83867: enable extended read / write for driver   Alexander Stein
• [PATCH 1/1] cmd: mmc: fix help and parameter verification with MMC_SPEED_MODE_SET not set   Alexander Stein
• [PATCH 1/1] fdt: fix condition for devicetree from bloblist   Alexander Stein
• [PATCH v2 0/3] Clean up bloblist initialization   Alexander Stein
• [PATCH 1/1] global_data: fix type for gd_malloc_ptr()   Alexander Stein
• [PATCH v3 1/4] clk: add gated-fixed-clock driver   Heiko Stübner
• [PATCH v3 2/4] pci: pcie_dw_rockchip: enable clocks before PHY init   Heiko Stübner
• [PATCH v3 3/4] pci: pcie_dw_rockchip: drop clk_release_bulk calls   Heiko Stübner
• [PATCH v3 4/4] pci: pcie_dw_rockchip: imply CLK_GATED_FIXED and switch PHY to imply   Heiko Stübner
• [PATCH] cmd: sf: fix sf probe using non-flash device as flash handle   Nia Su
• [PATCH v1 1/4] arm: k3: select tifsstub via board_fit_config_name_match   Sverdlin, Alexander
• [PATCH v4 1/4] imx9: Add support for saving DDR training data to NVM   Simona Toaca
• [PATCH v4 1/4] imx9: Add support for saving DDR training data to NVM   Simona Toaca
• [PATCH v4 1/4] imx9: Add support for saving DDR training data to NVM   Simona Toaca
• [PATCH v4 1/4] imx9: Add support for saving DDR training data to NVM   Simona Toaca
• [PATCH] board: rockchip: set M.2 NVMe PERSTN low in spl_board_init on Jaguar   Jakob Unterwurzacher
• i.MX28 FEC Ethernet on DeviceTree with RMII PHY   Stuart Longland VK4MSL
• i.MX28 FEC Ethernet on DeviceTree with RMII PHY   Stuart Longland VK4MSL
• [PATCH 0/6] Fixes, cleanup and a test for the SPL FIT "full" loader   Francesco Valla
• [PATCH 1/6] boot: fit: fix FIT verification in SPL   Francesco Valla
• [PATCH 2/6] spl: fit: fix loadables load under sandbox   Francesco Valla
• [PATCH 3/6] spl: fit: rework the FDT load hack   Francesco Valla
• [PATCH 4/6] spl: fit: drop the 'standalone' load attempt   Francesco Valla
• [PATCH 5/6] spl: fit: use CONFIG_IS_ENABLED whenever possible   Francesco Valla
• [PATCH 6/6] test: spl: add unit test for the "full" FIT loader   Francesco Valla
• [PATCH] usb: gadget: fastboot: avoid stale IN dequeue   Marek Vasut
• [PATCH v2] arm: mvebu: usb: enable Armada 375 in XHCI driver   Marek Vasut
• [PATCH v4 1/4] imx9: Add support for saving DDR training data to NVM   Marek Vasut
• [PATCH v4 1/4] imx9: Add support for saving DDR training data to NVM   Marek Vasut
• [PATCH v3] usb: xhci-mvebu: Enable Armada 375 in XHCI driver   Marek Vasut
• [PULL] u-boot-usb/master   Marek Vasut
• [PULL] u-boot-sh/master   Marek Vasut
• [PULL] u-boot-usb/next   Marek Vasut
• [PATCH v4 1/4] imx9: Add support for saving DDR training data to NVM   Marek Vasut
• [PATCH] [RFC] lmb: Optionally limit available memory to 4 GiB on limited systems   Marek Vasut
• [PATCH] [RFC] lmb: Optionally limit available memory to 4 GiB on limited systems   Marek Vasut
• [PATCH v4 1/4] imx9: Add support for saving DDR training data to NVM   Marek Vasut
• [PATCH] [RFC] lmb: Optionally limit available memory to 4 GiB on limited systems   Marek Vasut
• [PATCH v1] lmb: Optionally limit available memory to 4 GiB on limited systems   Marek Vasut
• [PATCH] tools: imx8image: Fix FSPI alignment to 4 kiB   Marek Vasut
• [PATCH v4 02/10] usb: Kconfig: add SPL_USB_DWC2   Marek Vasut
• [PATCH v1 3/3] net: fsl_enetc: Add SGMII support for i.MX95   Marek Vasut
• [PATCH] lmb: Rename LMB_LIMIT_DMA_BELOW_4G to LMB_LIMIT_DMA_BELOW_RAM_TOP   Marek Vasut
• [PATCH v1] lmb: Optionally limit available memory to 4 GiB on limited systems   Marek Vasut
• [PATCH v5 1/7] treewide: move bi_dram[] from bd to gd   Marek Vasut
• [PATCH v5 5/7] common: Add an option to relocate on ram top   Marek Vasut
• [PATCH RESEND] usb: gadget: atmel: use calloc() to allocate endpoint list   Marek Vasut
• [PATCH v2] usb: gadget: atmel: use calloc() to allocate endpoint list   Marek Vasut
• Re: 回复: [PATCH v1 3/3] net: fsl_enetc: Add SGMII support for i.MX95   Marek Vasut
• [RFC PATCH v2 00/64] drivers: usb: dwc3: sync code with Linux v6.16-rc7   Marek Vasut
• [PATCH 1/4] spl: atf: support Linux as BL33 with ATF   Marek Vasut
• [PATCH v5 1/7] treewide: move bi_dram[] from bd to gd   Marek Vasut
• [PATCH v6 6/7] configs: Enable RELOC_ADDR_TOP on arm64   Marek Vasut
• [PATCH v3 3/3] test: hook up test of allowing control DTB to act as FIT image   Rasmus Villemoes
• [PATCH v4 0/3] allow control DTB to double as "FIT image"   Rasmus Villemoes
• [PATCH v4 1/3] image-fit.c: introduce CONTROL_DTB_AS_FIT config knob   Rasmus Villemoes
• [PATCH v4 2/3] doc: develop: add section on embedding scripts inside control DTB   Rasmus Villemoes
• [PATCH v4 3/3] test: hook up test of allowing control DTB to act as FIT image   Rasmus Villemoes
• [PATCH v4 0/3] allow control DTB to double as "FIT image"   Rasmus Villemoes
• TZASC misconfiguration on i.mx8m   Richard Weinberger
• TZASC misconfiguration on i.mx8m   Richard Weinberger
• TZASC misconfiguration on i.mx8m   Richard Weinberger
• TZASC misconfiguration on i.mx8m   Richard Weinberger
• TZASC misconfiguration on i.mx8m   Richard Weinberger
• TZASC misconfiguration on i.mx8m   Richard Weinberger
• [PATCH RESEND 00/16] MSM8960 / mach-snapdragon ARMv7 support   Luca Weiss
• [PATCH v2 6/9] spacemit: k1: Add multiple device tree support   Guodong Xu
• [PATCH v6 2/6] arm64: dts: rockchip: enable UFS controller on FriendlyElec NanoPi M5   Kever Yang
• [PATCH v6 5/6] rockchip: rk3576-rock-4d: Enable UFS support   Kever Yang
• [PATCH v6 6/6] rockchip: rk3576-nanopi-m5: Enable UFS support   Kever Yang
• [PATCH V3] board: rockchip: add Anbernic RG-DS   Kever Yang
• [PATCH] rockchip: clk: clk_rk3576: Add support for RK3576 GMAC 25MHz clock output   Kever Yang
• [PATCH v1] rockchip: MAINTAINERS: upstream devicetree update   Kever Yang
• [PATCH v1] doc: clean up README.rockchip   Kever Yang
• [PATCH v2 5/5] rockchip: pinctrl: use include from dts/upstream   Kever Yang
• [PATCH V3] board: rockchip: add Anbernic RG-DS   Kever Yang
• [PATCH 1/5] ufs: add UFS descriptor/configuration utility support   Raz Ben Yehuda
• [PATCH 2/5] ufs: Expose selected UFS functions   Raz Ben Yehuda
• [PATCH 3/5] ufs: Extend the ufs user interface   Raz Ben Yehuda
• [PATCH 4/5] ufs: add ufs tool the configuration   Raz Ben Yehuda
• [PATCH 5/5] **Cover Letter for ufs-tool**   Raz Ben Yehuda
• [PATCH 3/5] ufs: Extend the ufs user interface   Raz Ben Yehuda
• [PATCH 1/5] ufs: add UFS descriptor/configuration utility support   Raz Ben Yehuda
• [PATCH 2/5] ufs: Expose selected UFS functions   Raz Ben Yehuda
• [PATCH 3/5] ufs: ufs tool   Raz Ben Yehuda
• [PATCH 4/5] ufs: add ufs_tool to Kconfig and Makefile   Raz Ben Yehuda
• [PATCH 5/5] ufs: doc/README.ufs   Raz Ben Yehuda
• [PATCH v3 3/9] arm: socfpga: Move firmware register settings from source code to device tree   Yuslaimi, Alif Zakuan
• [PATCH v3 4/9] arm: socfpga: Update Stratix10 SPL data save and restore implementation   Yuslaimi, Alif Zakuan
• [PATCH v3 9/9] spl: s10: Enhance watchdog support in SPL for Stratix 10   Yuslaimi, Alif Zakuan
• [PATCH v3 1/3] arm: socfpga: Consolidate dram_bank_mmu_setup()   Yuslaimi, Alif Zakuan
• [PATCH v3 3/3] ddr: socfpga: Implement ECC DRAM scrubbing support for both Gen5/Arria10   Yuslaimi, Alif Zakuan
• [PATCH] arm: dts: socfpga: Add MDK support with external GPIO expander   Yuslaimi, Alif Zakuan
• [PATCH v3 1/2] riscv: Make RISCV_ACLINT visible   Yao Zi
• [PATCH v4 0/9] SoCFPGA: Update Boot Support for Stratix10 in U-Boot   alif.zakuan.yuslaimi at altera.com
• [PATCH v4 1/9] arch: arm: dts: stratix10: Switch to using upstream Linux DT config   alif.zakuan.yuslaimi at altera.com
• [PATCH v4 2/9] configs: stratix10: Combine defconfig for all boot flashes   alif.zakuan.yuslaimi at altera.com
• [PATCH v4 3/9] arm: socfpga: Move firmware register settings from source code to device tree   alif.zakuan.yuslaimi at altera.com
• [PATCH v4 4/9] arm: socfpga: Update Stratix10 SPL data save and restore implementation   alif.zakuan.yuslaimi at altera.com
• [PATCH v4 5/9] arm: socfpga: s10: Enable system manager driver for Stratix10   alif.zakuan.yuslaimi at altera.com
• [PATCH v4 6/9] ddr: altera: soc64: Add secure region support for ATF flow   alif.zakuan.yuslaimi at altera.com
• [PATCH v4 7/9] clk: s10: Refactor S10 clock driver   alif.zakuan.yuslaimi at altera.com
• [PATCH v4 8/9] mmc: socfpga_dw_mmc: Exclude S10 from legacy clkmgr address retrieval   alif.zakuan.yuslaimi at altera.com
• [PATCH v4 9/9] spl: s10: Enhance watchdog support in SPL for Stratix 10   alif.zakuan.yuslaimi at altera.com
• [PATCH v2] arm: dts: socfpga: Add MDK support with external GPIO expander   alif.zakuan.yuslaimi at altera.com
• [PATCH v4 0/3] SoCFPGA: Update DDR Support for Gen5/Arria10 in U-Boot   alif.zakuan.yuslaimi at altera.com
• [PATCH v4 1/3] arm: socfpga: Consolidate dram_bank_mmu_setup()   alif.zakuan.yuslaimi at altera.com
• [PATCH v4 2/3] ddr: altera: gen5: Add DRAM size checking   alif.zakuan.yuslaimi at altera.com
• [PATCH v4 3/3] ddr: socfpga: Implement ECC DRAM scrubbing support for both Gen5/Arria10   alif.zakuan.yuslaimi at altera.com
• [PATCH v3 1/6] reset: Allow per-board reset type   dmukhin at ford.com
• [PATCH v3 2/6] reset: Add explicit cold reset support   dmukhin at ford.com
• [PATCH v3 4/6] reset: x86: Use cpu_hlt() in pch_sysreset_power_off()   dmukhin at ford.com
• [PATCH v4 0/7] reset: add board reset type   dmukhin at ford.com
• [PATCH v4 1/7] reset: Allow per-board reset type   dmukhin at ford.com
• [PATCH v4 2/7] reset: Add explicit cold reset support   dmukhin at ford.com
• [PATCH v4 3/7] reset: Print reset type on diagnostic console   dmukhin at ford.com
• [PATCH v4 4/7] reset: x86: Use cpu_hlt() in pch_sysreset_power_off()   dmukhin at ford.com
• [PATCH v4 5/7] reset: x86: Use cpu_hlt() in efi_reset_system()   dmukhin at ford.com
• [PATCH v4 6/7] docs: reset: document cold reset option   dmukhin at ford.com
• [PATCH v4 7/7] tests: reset: add cold/warm reset types   dmukhin at ford.com
• [PATCH v1 0/8] bootcount: introduce GPT-backed bootcount device   dmukhin at ford.com
• [PATCH v1 1/8] cros: add common helpers for GPT flags   dmukhin at ford.com
• [PATCH v1 2/8] disk: efi: introduce {read,write}_disk_flags   dmukhin at ford.com
• [PATCH v1 3/8] test: disk: coverage for {read,write}_disk_flags   dmukhin at ford.com
• [PATCH v1 4/8] cmd: gpt: enable extension to manipulate GPT PTE attributes   dmukhin at ford.com
• [PATCH v1 5/8] configs: sandbox: enable GPT flags extension   dmukhin at ford.com
• [PATCH v1 6/8] bootcount: gpt: introduce GPT-backed bootcount device   dmukhin at ford.com
• [PATCH v1 7/8] bootcount: gpt: ensure coreboot payload enables DM_BOOTCOUNT   dmukhin at ford.com
• [PATCH v1 8/8] bootcount: gate bootcount_{inc, error}() behind !CONFIG_DM_BOOTCOUNT_GPT   dmukhin at ford.com
• [PATCH v1 2/5] drivers: nvme: Implement NVMe flush command (0x0)   dmukhin at ford.com
• [PATCH v2 4/6] cmd: Add flush support for all blk devices   dmukhin at ford.com
• [PATCH v2 4/6] cmd: Add flush support for all blk devices   dmukhin at ford.com
• [PATCH v2 0/6] nvme: few fixups   dmukhin at ford.com
• [PATCH] smbios: Fix wrong sysinfo ID for Type 3 enclosure asset tag   boewingloh.linux at gmail.com
• [PATCH] arm: mediatek: mt7988: restore full DRAM bank reporting   rmandrad at gmail.com
• [PATCH] arm: mediatek: mt7988: restore full DRAM bank reporting   rmandrad at gmail.com
• [PATCH v1] i2c: geni: reset controller on NACK to recover from invalid bus state   neil.armstrong at linaro.org
• [PATCH v2 0/6] nvme: few fixups   neil.armstrong at linaro.org
• [PATCH 0/3] net: fsl_enetc: Add SGMII 1G for i.MX95   alice.guo at oss.nxp.com
• [PATCH v1 1/3] net: fsl_enetc_xpcs_phy: Extract common PMA MMD init sequence into helper function   alice.guo at oss.nxp.com
• [PATCH v1 2/3] net: fsl_enetc_xpcs_phy: Add SGMII 1G support for i.MX95 XPCS   alice.guo at oss.nxp.com
• [PATCH v1 3/3] net: fsl_enetc: Add SGMII support for i.MX95   alice.guo at oss.nxp.com
• [PATCHv9 0/3] various memory related fixups   rs at ti.com
• [PATCHv9 1/3] boot: image-fdt: free old dtb reservations   rs at ti.com
• [PATCHv9 2/3] test: boot: add a fdt reserved region check   rs at ti.com
• [PATCHv9 3/3] memory: reserve from start_addr_sp to initial_relocaddr   rs at ti.com
• [PATCHv10 0/4] various memory related fixups   rs at ti.com
• [PATCHv10 1/4] boot: image-fdt: free old dtb reservations   rs at ti.com
• [PATCHv10 2/4] test_ut: add a ut_ubman fixture to clean up tests   rs at ti.com
• [PATCHv10 3/4] test: boot: add a fdt reserved region check   rs at ti.com
• [PATCHv10 4/4] memory: reserve from start_addr_sp to initial_relocaddr   rs at ti.com

Last message date: Wed Jun 10 12:34:43 CEST 2026
Archived on: Wed Jun 10 12:35:10 CEST 2026

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...