[PATCH v2 1/2] drivers: clk: n5x: Fix incorrect EMAC clock source selection

[Chen Huei Lok]

Fix the incorrect bit masking and bit shift that caused EMAC to always
get the clock source from emaca_free_clk. The mask must be applied
before shifting, not after.

Signed-off-by: Chen Huei Lok <chen.huei.lok at altera.com>
---

Changes in v2:
- No functional change; resent as patch 1/2 of the series.

 drivers/clk/altera/clk-n5x.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/clk/altera/clk-n5x.c b/drivers/clk/altera/clk-n5x.c
index 185c9028a78..e0ddaa8e944 100644
--- a/drivers/clk/altera/clk-n5x.c
+++ b/drivers/clk/altera/clk-n5x.c
@@ -325,14 +325,14 @@ static u32 clk_get_emac_clk_hz(struct socfpga_clk_plat *plat, u32 emac_id)
 	/* Get EMAC clock source */
 	ctl = CM_REG_READL(plat, CLKMGR_PERPLL_EMACCTL);
 	if (emac_id == N5X_EMAC0_CLK)
-		ctl = (ctl >> CLKMGR_PERPLLGRP_EMACCTL_EMAC0SELB_OFFSET) &
-		       CLKMGR_PERPLLGRP_EMACCTL_EMAC0SELB_MASK;
+		ctl = (ctl & CLKMGR_PERPLLGRP_EMACCTL_EMAC0SELB_MASK) >>
+		       CLKMGR_PERPLLGRP_EMACCTL_EMAC0SELB_OFFSET;
 	else if (emac_id == N5X_EMAC1_CLK)
-		ctl = (ctl >> CLKMGR_PERPLLGRP_EMACCTL_EMAC1SELB_OFFSET) &
-		       CLKMGR_PERPLLGRP_EMACCTL_EMAC1SELB_MASK;
+		ctl = (ctl & CLKMGR_PERPLLGRP_EMACCTL_EMAC1SELB_MASK) >>
+		       CLKMGR_PERPLLGRP_EMACCTL_EMAC1SELB_OFFSET;
 	else if (emac_id == N5X_EMAC2_CLK)
-		ctl = (ctl >> CLKMGR_PERPLLGRP_EMACCTL_EMAC2SELB_OFFSET) &
-		       CLKMGR_PERPLLGRP_EMACCTL_EMAC2SELB_MASK;
+		ctl = (ctl & CLKMGR_PERPLLGRP_EMACCTL_EMAC2SELB_MASK) >>
+		       CLKMGR_PERPLLGRP_EMACCTL_EMAC2SELB_OFFSET;
 	else
 		return 0;
 
-- 
2.43.7