[PATCH] treewide: change email links from mailman to patch.msgid.link with message-id
Neil Armstrong
neil.armstrong at linaro.org
Wed Jun 24 16:39:42 CEST 2026
In preparation of the migration of the mailmain mailing-list currently
hosted on the denx.de infrastructure, migrate the links in the code,
comments and documentation to http://patch.msgid.link to be future proof
and always link to the expected content data and uses the message-id in
the URL which will help find the appropriate e-mail in the future.
Signed-off-by: Neil Armstrong <neil.armstrong at linaro.org>
---
[1] https://lore.kernel.org/all/20260623-osuosl-ml-switch-v2-0-28fd46e89e46@linaro.org/
---
arch/powerpc/config.mk | 2 +-
board/boundary/nitrogen6x/README | 2 +-
doc/chromium/chainload.rst | 4 ++--
doc/develop/historical/generic_board.rst | 6 +++---
lib/efi_selftest/efi_selftest.c | 2 +-
tools/rkcommon.c | 4 ++--
6 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/powerpc/config.mk b/arch/powerpc/config.mk
index 6e30df6504e..18aaae037f6 100644
--- a/arch/powerpc/config.mk
+++ b/arch/powerpc/config.mk
@@ -32,7 +32,7 @@ archprepare: checkgcc4
# GCC 3.x is reported to have problems generating the type of relocation
# that U-Boot wants.
-# See http://lists.denx.de/pipermail/u-boot/2012-September/135156.html
+# See https://patch.msgid.link/1348500648.2514.2.camel@petert
checkgcc4:
@if test "$(call cc-name)" = "gcc" -a \
$(call cc-version) -lt 0400; then \
diff --git a/board/boundary/nitrogen6x/README b/board/boundary/nitrogen6x/README
index 0b59289e7f0..114f81f1d1a 100644
--- a/board/boundary/nitrogen6x/README
+++ b/board/boundary/nitrogen6x/README
@@ -17,7 +17,7 @@ and saving the environment to SPI NOR.
It does not support 'boot from SD' at offset 0x400
except through the 'bmode' command.
- http://lists.denx.de/pipermail/u-boot/2012-August/131151.html
+ https://patch.msgid.link/1345062683-19134-1-git-send-email-troy.kisky@boundarydevices.com/
2. Boots using 6x_bootscript on SATA or SD card
-----------------------------------------------
diff --git a/doc/chromium/chainload.rst b/doc/chromium/chainload.rst
index b00ee94eaa4..0f61e020db8 100644
--- a/doc/chromium/chainload.rst
+++ b/doc/chromium/chainload.rst
@@ -42,9 +42,9 @@ Nyan-big
Compiled based on information here::
- https://lists.denx.de/pipermail/u-boot/2015-March/209530.html
+ https://patch.msgid.link/1427703262.24522.59.camel@collabora.co.uk/
https://git.collabora.com/cgit/user/tomeu/u-boot.git/commit/?h=nyan-big
- https://lists.denx.de/pipermail/u-boot/2017-May/289491.html
+ https://patch.msgid.link/CALr8Vo1WvO=m1W2zvT=MOQ3k-fNtcCtBjk2+zgKha0j28s8g6A@mail.gmail.com/
https://github.com/chromeos-nvidia-androidtv/gnu-linux-on-acer-chromebook-13#copy-data-to-the-sd-card
1. Build U-Boot
diff --git a/doc/develop/historical/generic_board.rst b/doc/develop/historical/generic_board.rst
index 12550a140e0..17a92687c5b 100644
--- a/doc/develop/historical/generic_board.rst
+++ b/doc/develop/historical/generic_board.rst
@@ -64,17 +64,17 @@ separate function calls so that they can easily be included or excluded
for a particular architecture. It also makes it easier to adopt Graeme's
initcall proposal when it is ready.
-http://lists.denx.de/pipermail/u-boot/2012-January/114499.html
+https://patch.msgid.link/4F019ABB.9010201@gmail.com/
This series removes the dependency on generic relocation. So relocation
happens as one big chunk and is still completely arch-specific. See the
relocation series for a proposed solution to this for ARM:
-http://lists.denx.de/pipermail/u-boot/2011-December/112928.html
+https://patch.msgid.link/CAPnjgZ0jesqX1Y71S5xoYQDGPuARfOX48RGbU9Mw=P5HGYcOKg@mail.gmail.com/
or Graeme's recent x86 series v2:
-http://lists.denx.de/pipermail/u-boot/2012-January/114467.html
+https://patch.msgid.link/1325477374-6417-1-git-send-email-graeme.russ@gmail.com/
Instead of moving over a whole architecture, this series takes the approach
of simply enabling generic board support for an architecture. It is then up
diff --git a/lib/efi_selftest/efi_selftest.c b/lib/efi_selftest/efi_selftest.c
index 2b95713afb4..ca23438bb94 100644
--- a/lib/efi_selftest/efi_selftest.c
+++ b/lib/efi_selftest/efi_selftest.c
@@ -284,7 +284,7 @@ efi_status_t EFIAPI efi_selftest(efi_handle_t image_handle,
* implemented we should call
* st_boottime->exit(image_handle, EFI_SUCCESS, 0, NULL);
* here, cf.
- * https://lists.denx.de/pipermail/u-boot/2017-October/308720.html
+ * https://patch.msgid.link/44453b06-5a09-ee3c-0a6a-b54bee9020e4@gmx.de
*/
return EFI_SUCCESS;
}
diff --git a/tools/rkcommon.c b/tools/rkcommon.c
index cb2d30bfd57..b39777fc060 100644
--- a/tools/rkcommon.c
+++ b/tools/rkcommon.c
@@ -205,7 +205,7 @@ static int rkcommon_get_aligned_size(struct image_tool_params *params,
/*
* Pad to a 2KB alignment, as required for init/boot size by the ROM
- * (see https://lists.denx.de/pipermail/u-boot/2017-May/293268.html)
+ * (see https://patch.msgid.link/CANbgqAQPw5Dxp7Qm_aZoL1nggg9Mm1SQoKvx=V5a8p-9+DTDNw@mail.gmail.com/)
*/
return ROUND(size, RK_SIZE_ALIGN);
}
@@ -328,7 +328,7 @@ static void rkcommon_set_header0(void *buf, struct image_tool_params *params)
* to determine the size of the next-stage bootloader (e.g. U-Boot
* proper), when used with the back-to-bootrom functionality.
*
- * see https://lists.denx.de/pipermail/u-boot/2017-May/293267.html
+ * see https://patch.msgid.link/CANbgqAQ5p-fE4T-Ye9UAMs-nRGU8AP_yxDf+5SbZbP8bxLa0dg@mail.gmail.com/
* for a more detailed explanation by Andy Yan
*/
if (spl_params.boot_file)
---
base-commit: f072620dc9ffda00b010783da27c41231c3a439b
change-id: 20260624-ml-switch-ml-links-to-patch-msg-id-e925a37b0802
Best regards,
--
Neil Armstrong <neil.armstrong at linaro.org>
More information about the U-Boot
mailing list