[PATCH 2/6] imx8mq_evk: enable booting Image.gz and avoid extra memcpy

[Peng Fan (OSS)]

From: Peng Fan <peng.fan at nxp.com>

Add support for booting compressed kernel Image.gz by defining
kernel_comp_addr_r and kernel_comp_size in the default environment.

Set kernel_comp_addr_r to a high memory region to provide a dedicated
decompression buffer, avoiding overlap between compressed
input and decompressed output.

Also adjust CONFIG_SYS_LOAD_ADDR from 0x40480000 to 0x40400000.

With TEXT_OFFSET=0, the kernel is relocated directly to loadaddr, so
separating decompression and execution regions is required to guarantee
safe decompression without additional copying.

Signed-off-by: Peng Fan <peng.fan at nxp.com>
---
 board/nxp/imx8mq_evk/imx8mq_evk.env | 2 ++
 configs/imx8mq_evk_defconfig        | 2 +-
 2 files changed, 3 insertions(+), 1 deletion(-)

diff --git a/board/nxp/imx8mq_evk/imx8mq_evk.env b/board/nxp/imx8mq_evk/imx8mq_evk.env
index 6575dd7cb07..dd674afac91 100644
--- a/board/nxp/imx8mq_evk/imx8mq_evk.env
+++ b/board/nxp/imx8mq_evk/imx8mq_evk.env
@@ -10,6 +10,8 @@ initrd_addr=0x43800000
 image=Image
 ip_dyn=yes
 kernel_addr_r=CONFIG_SYS_LOAD_ADDR
+kernel_comp_addr_r=0x80000000
+kernel_comp_size=0x2000000
 loadaddr=CONFIG_SYS_LOAD_ADDR
 mmcautodetect=yes
 mmcdev=CONFIG_ENV_MMC_DEVICE_INDEX
diff --git a/configs/imx8mq_evk_defconfig b/configs/imx8mq_evk_defconfig
index 67a7f339816..3a78eaf9467 100644
--- a/configs/imx8mq_evk_defconfig
+++ b/configs/imx8mq_evk_defconfig
@@ -19,7 +19,7 @@ CONFIG_SPL_TEXT_BASE=0x7E1000
 CONFIG_SPL_HAS_BSS_LINKER_SECTION=y
 CONFIG_SPL_BSS_START_ADDR=0x180000
 CONFIG_SPL_BSS_MAX_SIZE=0x2000
-CONFIG_SYS_LOAD_ADDR=0x40480000
+CONFIG_SYS_LOAD_ADDR=0x40400000
 CONFIG_SPL=y
 CONFIG_ENV_OFFSET_REDUND=0x204000
 CONFIG_IMX_BOOTAUX=y

-- 
2.51.0