[PATCH v1 09/18] Kconfig: i2c: restyle
Johan Jonker
jbx6244 at gmail.com
Wed Jun 10 16:39:01 CEST 2026
Restyle all Kconfigs for "i2c":
Menu entries : no space left
Menu attributes: 1 TAB
Help text : 1 TAB + 2 spaces
Replace '---help---' by 'help'
Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
---
drivers/i2c/Kconfig | 140 +++++++++++++++++++-------------------
drivers/i2c/muxes/Kconfig | 2 +-
2 files changed, 71 insertions(+), 71 deletions(-)
diff --git a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig
index 37288a47eb75..faec19ec6cbd 100644
--- a/drivers/i2c/Kconfig
+++ b/drivers/i2c/Kconfig
@@ -110,16 +110,16 @@ config I2C_CROS_EC_TUNNEL
config I2C_CROS_EC_LDO
bool "Provide access to LDOs on the Chrome OS EC"
depends on CROS_EC
- ---help---
- On many Chromebooks the main PMIC is inaccessible to the AP. This is
- often dealt with by using an I2C pass-through interface provided by
- the EC. On some unfortunate models (e.g. Spring) the pass-through
- is not available, and an LDO message is available instead. This
- option enables a driver which provides very basic access to those
- regulators, via the EC. We implement this as an I2C bus which
- emulates just the TPS65090 messages we know about. This is done to
- avoid duplicating the logic in the TPS65090 regulator driver for
- enabling/disabling an LDO.
+ help
+ On many Chromebooks the main PMIC is inaccessible to the AP. This is
+ often dealt with by using an I2C pass-through interface provided by
+ the EC. On some unfortunate models (e.g. Spring) the pass-through
+ is not available, and an LDO message is available instead. This
+ option enables a driver which provides very basic access to those
+ regulators, via the EC. We implement this as an I2C bus which
+ emulates just the TPS65090 messages we know about. This is done to
+ avoid duplicating the logic in the TPS65090 regulator driver for
+ enabling/disabling an LDO.
config I2C_SET_DEFAULT_BUS_NUM
bool "Set default I2C bus number"
@@ -180,9 +180,9 @@ config SYS_I2C_IPROC
Say yes here to to enable the Broadco I2C driver.
config SYS_I2C_FSL
- bool "Freescale I2C bus driver"
- depends on M68K || PPC
- help
+ bool "Freescale I2C bus driver"
+ depends on M68K || PPC
+ help
Add support for Freescale I2C busses as used on MPC8240, MPC8245, and
MPC85xx processors.
@@ -249,14 +249,14 @@ config SYS_I2C_DW_PCI
controller.
config SYS_I2C_AST2600
- bool "AST2600 I2C Controller"
- depends on DM_I2C && ARCH_ASPEED
- help
- Say yes here to select AST2600 I2C Host Controller. The driver
- support AST2600 I2C new mode register. This I2C controller supports:
- _Standard-mode (up to 100 kHz)
- _Fast-mode (up to 400 kHz)
- _Fast-mode Plus (up to 1 MHz)
+ bool "AST2600 I2C Controller"
+ depends on DM_I2C && ARCH_ASPEED
+ help
+ Say yes here to select AST2600 I2C Host Controller. The driver
+ support AST2600 I2C new mode register. This I2C controller supports:
+ _Standard-mode (up to 100 kHz)
+ _Fast-mode (up to 400 kHz)
+ _Fast-mode Plus (up to 1 MHz)
config SYS_I2C_ASPEED
bool "Aspeed I2C Controller"
@@ -333,50 +333,50 @@ if SYS_I2C_MXC && (SYS_I2C_LEGACY || SPL_SYS_I2C_LEGACY)
config SYS_I2C_MXC_I2C1
bool "NXP MXC I2C1"
help
- Add support for NXP MXC I2C Controller 1.
- Required for SoCs which have I2C MXC controller 1 eg LS1088A, LS2080A
+ Add support for NXP MXC I2C Controller 1.
+ Required for SoCs which have I2C MXC controller 1 eg LS1088A, LS2080A
config SYS_I2C_MXC_I2C2
bool "NXP MXC I2C2"
help
- Add support for NXP MXC I2C Controller 2.
- Required for SoCs which have I2C MXC controller 2 eg LS1088A, LS2080A
+ Add support for NXP MXC I2C Controller 2.
+ Required for SoCs which have I2C MXC controller 2 eg LS1088A, LS2080A
config SYS_I2C_MXC_I2C3
bool "NXP MXC I2C3"
help
- Add support for NXP MXC I2C Controller 3.
- Required for SoCs which have I2C MXC controller 3 eg LS1088A, LS2080A
+ Add support for NXP MXC I2C Controller 3.
+ Required for SoCs which have I2C MXC controller 3 eg LS1088A, LS2080A
config SYS_I2C_MXC_I2C4
bool "NXP MXC I2C4"
help
- Add support for NXP MXC I2C Controller 4.
- Required for SoCs which have I2C MXC controller 4 eg LS1088A, LS2080A
+ Add support for NXP MXC I2C Controller 4.
+ Required for SoCs which have I2C MXC controller 4 eg LS1088A, LS2080A
config SYS_I2C_MXC_I2C5
bool "NXP MXC I2C5"
help
- Add support for NXP MXC I2C Controller 5.
- Required for SoCs which have I2C MXC controller 5 eg LX2160A
+ Add support for NXP MXC I2C Controller 5.
+ Required for SoCs which have I2C MXC controller 5 eg LX2160A
config SYS_I2C_MXC_I2C6
bool "NXP MXC I2C6"
help
- Add support for NXP MXC I2C Controller 6.
- Required for SoCs which have I2C MXC controller 6 eg LX2160A
+ Add support for NXP MXC I2C Controller 6.
+ Required for SoCs which have I2C MXC controller 6 eg LX2160A
config SYS_I2C_MXC_I2C7
bool "NXP MXC I2C7"
help
- Add support for NXP MXC I2C Controller 7.
- Required for SoCs which have I2C MXC controller 7 eg LX2160A
+ Add support for NXP MXC I2C Controller 7.
+ Required for SoCs which have I2C MXC controller 7 eg LX2160A
config SYS_I2C_MXC_I2C8
bool "NXP MXC I2C8"
help
- Add support for NXP MXC I2C Controller 8.
- Required for SoCs which have I2C MXC controller 8 eg LX2160A
+ Add support for NXP MXC I2C Controller 8.
+ Required for SoCs which have I2C MXC controller 8 eg LX2160A
endif
if SYS_I2C_MXC_I2C1
@@ -385,13 +385,13 @@ config SYS_MXC_I2C1_SPEED
default 40000000 if TARGET_LS2080A_EMU
default 100000
help
- MXC I2C Channel 1 speed
+ MXC I2C Channel 1 speed
config SYS_MXC_I2C1_SLAVE
hex "I2C1 Slave"
default 0x0
help
- MXC I2C1 Slave
+ MXC I2C1 Slave
endif
if SYS_I2C_MXC_I2C2
@@ -400,13 +400,13 @@ config SYS_MXC_I2C2_SPEED
default 40000000 if TARGET_LS2080A_EMU
default 100000
help
- MXC I2C Channel 2 speed
+ MXC I2C Channel 2 speed
config SYS_MXC_I2C2_SLAVE
hex "I2C2 Slave"
default 0x0
help
- MXC I2C2 Slave
+ MXC I2C2 Slave
endif
if SYS_I2C_MXC_I2C3
@@ -414,13 +414,13 @@ config SYS_MXC_I2C3_SPEED
int "I2C Channel 3 speed"
default 100000
help
- MXC I2C Channel 3 speed
+ MXC I2C Channel 3 speed
config SYS_MXC_I2C3_SLAVE
hex "I2C3 Slave"
default 0x0
help
- MXC I2C3 Slave
+ MXC I2C3 Slave
endif
if SYS_I2C_MXC_I2C4
@@ -428,13 +428,13 @@ config SYS_MXC_I2C4_SPEED
int "I2C Channel 4 speed"
default 100000
help
- MXC I2C Channel 4 speed
+ MXC I2C Channel 4 speed
config SYS_MXC_I2C4_SLAVE
hex "I2C4 Slave"
default 0x0
help
- MXC I2C4 Slave
+ MXC I2C4 Slave
endif
if SYS_I2C_MXC_I2C5
@@ -442,13 +442,13 @@ config SYS_MXC_I2C5_SPEED
int "I2C Channel 5 speed"
default 100000
help
- MXC I2C Channel 5 speed
+ MXC I2C Channel 5 speed
config SYS_MXC_I2C5_SLAVE
hex "I2C5 Slave"
default 0x0
help
- MXC I2C5 Slave
+ MXC I2C5 Slave
endif
if SYS_I2C_MXC_I2C6
@@ -456,13 +456,13 @@ config SYS_MXC_I2C6_SPEED
int "I2C Channel 6 speed"
default 100000
help
- MXC I2C Channel 6 speed
+ MXC I2C Channel 6 speed
config SYS_MXC_I2C6_SLAVE
hex "I2C6 Slave"
default 0x0
help
- MXC I2C6 Slave
+ MXC I2C6 Slave
endif
if SYS_I2C_MXC_I2C7
@@ -470,13 +470,13 @@ config SYS_MXC_I2C7_SPEED
int "I2C Channel 7 speed"
default 100000
help
- MXC I2C Channel 7 speed
+ MXC I2C Channel 7 speed
config SYS_MXC_I2C7_SLAVE
hex "I2C7 Slave"
default 0x0
help
- MXC I2C7 Slave
+ MXC I2C7 Slave
endif
if SYS_I2C_MXC_I2C8
@@ -484,13 +484,13 @@ config SYS_MXC_I2C8_SPEED
int "I2C Channel 8 speed"
default 100000
help
- MXC I2C Channel 8 speed
+ MXC I2C Channel 8 speed
config SYS_MXC_I2C8_SLAVE
hex "I2C8 Slave"
default 0x0
help
- MXC I2C8 Slave
+ MXC I2C8 Slave
endif
config SYS_I2C_NEXELL
@@ -668,19 +668,19 @@ config SYS_I2C_STM32F7
help
Enable this option to add support for STM32 I2C controller
introduced with STM32F7/H7 SoCs. This I2C controller supports :
- _ Slave and master modes
- _ Multimaster capability
- _ Standard-mode (up to 100 kHz)
- _ Fast-mode (up to 400 kHz)
- _ Fast-mode Plus (up to 1 MHz)
- _ 7-bit and 10-bit addressing mode
- _ Multiple 7-bit slave addresses (2 addresses, 1 with configurable mask)
- _ All 7-bit addresses acknowledge mode
- _ General call
- _ Programmable setup and hold times
- _ Easy to use event management
- _ Optional clock stretching
- _ Software reset
+ _ Slave and master modes
+ _ Multimaster capability
+ _ Standard-mode (up to 100 kHz)
+ _ Fast-mode (up to 400 kHz)
+ _ Fast-mode Plus (up to 1 MHz)
+ _ 7-bit and 10-bit addressing mode
+ _ Multiple 7-bit slave addresses (2 addresses, 1 with configurable mask)
+ _ All 7-bit addresses acknowledge mode
+ _ General call
+ _ Programmable setup and hold times
+ _ Easy to use event management
+ _ Optional clock stretching
+ _ Software reset
config SYS_I2C_SUN6I_P2WI
bool "Allwinner sun6i P2WI controller"
@@ -792,10 +792,10 @@ config SYS_I2C_XILINX_XIIC
Support for Xilinx AXI I2C controller.
config SYS_I2C_IHS
- bool "gdsys IHS I2C driver"
- depends on DM_I2C
- help
- Support for gdsys IHS I2C driver on FPGA bus.
+ bool "gdsys IHS I2C driver"
+ depends on DM_I2C
+ help
+ Support for gdsys IHS I2C driver on FPGA bus.
source "drivers/i2c/muxes/Kconfig"
diff --git a/drivers/i2c/muxes/Kconfig b/drivers/i2c/muxes/Kconfig
index 3b1220b21056..9f642e4451f3 100644
--- a/drivers/i2c/muxes/Kconfig
+++ b/drivers/i2c/muxes/Kconfig
@@ -49,7 +49,7 @@ config I2C_MUX_PCA954x
MAX7356, MAX7357, MAX7358, MAX7367, MAX7368 and MAX7369
config I2C_MUX_GPIO
- tristate "GPIO-based I2C multiplexer"
+ tristate "GPIO-based I2C multiplexer"
depends on I2C_MUX && DM_GPIO
select DEVRES
help
--
2.39.5
More information about the U-Boot
mailing list