[PATCH v1 08/18] Kconfig: net: restyle
Johan Jonker
jbx6244 at gmail.com
Wed Jun 10 16:38:48 CEST 2026
Restyle all Kconfigs for "net":
Menu entries : no space left
Menu attributes: 1 TAB
Help text : 1 TAB + 2 spaces
Replace '---help---' by 'help'
Signed-off-by: Johan Jonker <jbx6244 at gmail.com>
---
net/Kconfig | 20 ++++++++++----------
net/lwip/Kconfig | 2 +-
2 files changed, 11 insertions(+), 11 deletions(-)
diff --git a/net/Kconfig b/net/Kconfig
index e712a0dd2ace..55e7ffe761f5 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -114,15 +114,15 @@ config SERVERIP_FROM_PROXYDHCP
bool "Get serverip value from Proxy DHCP response"
help
Allows bootfile config to be fetched from Proxy DHCP server
- while IP is obtained from main DHCP server.
+ while IP is obtained from main DHCP server.
config SERVERIP_FROM_PROXYDHCP_DELAY_MS
int "# of additional milliseconds to wait for ProxyDHCP response"
default 100
help
Amount of additional time to wait for ProxyDHCP response after
- receiving response from main DHCP server. Has no effect if
- SERVERIP_FROM_PROXYDHCP is false.
+ receiving response from main DHCP server. Has no effect if
+ SERVERIP_FROM_PROXYDHCP is false.
config KEEP_SERVERADDR
bool "Write the server's MAC address to 'serveraddr'"
@@ -282,10 +282,10 @@ config TFTP_BLOCKSIZE
endif # if NET
config SYS_RX_ETH_BUFFER
- int "Number of receive packet buffers"
- default 4
- help
- Defines the number of Ethernet receive buffers. On some Ethernet
- controllers it is recommended to set this value to 8 or even higher,
- since all buffers can be full shortly after enabling the interface on
- high Ethernet traffic.
+ int "Number of receive packet buffers"
+ default 4
+ help
+ Defines the number of Ethernet receive buffers. On some Ethernet
+ controllers it is recommended to set this value to 8 or even higher,
+ since all buffers can be full shortly after enabling the interface on
+ high Ethernet traffic.
diff --git a/net/lwip/Kconfig b/net/lwip/Kconfig
index 0cfd3eb2684f..3beaf48ff2a0 100644
--- a/net/lwip/Kconfig
+++ b/net/lwip/Kconfig
@@ -18,7 +18,7 @@ config LWIP_DEBUG
bool "Enable debug traces in the lwIP library"
help
Prints messages to the console regarding network packets that go in
- and out of the lwIP library.
+ and out of the lwIP library.
config LWIP_DEBUG_RXTX
bool "Dump packets sent and received by lwIP"
--
2.39.5
More information about the U-Boot
mailing list