[PATCH v2 4/4] configs: Add defconfig for ipq9650 RDP488

[Badhrinath S]

Add default configuration for the IPQ9650 RDP488 board with eMMC boot
support.

Signed-off-by: Badhrinath S <badhrinath.s at oss.qualcomm.com>
---
Changes in v2:
- No changes

 configs/qcom_ipq9650_mmc_defconfig | 57 ++++++++++++++++++++++++++++++
 1 file changed, 57 insertions(+)
 create mode 100644 configs/qcom_ipq9650_mmc_defconfig

diff --git a/configs/qcom_ipq9650_mmc_defconfig b/configs/qcom_ipq9650_mmc_defconfig
new file mode 100644
index 000000000000..ce2488d72eb1
--- /dev/null
+++ b/configs/qcom_ipq9650_mmc_defconfig
@@ -0,0 +1,57 @@
+CONFIG_ARM=y
+CONFIG_SKIP_LOWLEVEL_INIT=y
+CONFIG_POSITION_INDEPENDENT=y
+CONFIG_SYS_INIT_SP_BSS_OFFSET=0x180000
+CONFIG_ARCH_SNAPDRAGON=y
+CONFIG_TEXT_BASE=0x8a280000
+CONFIG_NR_DRAM_BANKS=24
+CONFIG_ENV_SIZE=0x40000
+CONFIG_ENV_OFFSET=0
+CONFIG_DEFAULT_DEVICE_TREE="qcom/ipq9650-rdp488"
+CONFIG_SYS_LOAD_ADDR=0x90000000
+CONFIG_DEBUG_UART_BASE=0x1a98000
+CONFIG_DEBUG_UART_CLOCK=14745600
+CONFIG_DEBUG_UART=y
+CONFIG_REMAKE_ELF=y
+# CONFIG_EFI_LOADER is not set
+CONFIG_FIT=y
+CONFIG_FIT_VERBOSE=y
+# CONFIG_BOOTSTD is not set
+CONFIG_OF_BOARD_SETUP=y
+CONFIG_USE_PREBOOT=y
+CONFIG_SYS_PBSIZE=1024
+# CONFIG_DISPLAY_CPUINFO is not set
+CONFIG_DISPLAY_BOARDINFO_LATE=y
+CONFIG_HUSH_PARSER=y
+CONFIG_CMD_MMC=y
+CONFIG_CMD_PART=y
+CONFIG_OF_LIVE=y
+CONFIG_ENV_IS_IN_MMC=y
+CONFIG_CLK=y
+CONFIG_CLK_QCOM_IPQ9650=y
+CONFIG_MSM_GPIO=y
+# CONFIG_I2C is not set
+# CONFIG_INPUT is not set
+CONFIG_MISC=y
+CONFIG_QCOM_GENI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_ADMA=y
+CONFIG_MMC_SDHCI_MSM=y
+CONFIG_MTD=y
+CONFIG_DM_MDIO=y
+CONFIG_DM_ETH_PHY=y
+CONFIG_DWC_ETH_QOS=y
+CONFIG_DWC_ETH_QOS_QCOM=y
+CONFIG_RGMII=y
+CONFIG_PHY=y
+CONFIG_PHY_QCOM_QMP_UFS=y
+CONFIG_PHY_QCOM_QUSB2=y
+CONFIG_PINCTRL=y
+CONFIG_PINCONF=y
+CONFIG_PINCTRL_QCOM_IPQ9650=y
+CONFIG_DEBUG_UART_MSM_GENI=y
+CONFIG_DEBUG_UART_ANNOUNCE=y
+CONFIG_MSM_SERIAL=y
+CONFIG_MSM_GENI_SERIAL=y
+CONFIG_SOC_QCOM=y
+CONFIG_SYS_MALLOC_LEN=0xC0000
-- 
2.34.1