[PATCH v3 2/3] arm: mvebu: db-xc3-24g4xg: Remove marvell, nand-keep-config

[Stefan Roese]

On 12/19/25 11:59, Chris Packham wrote:

> nand-keep-config is used to retain the NAND controller configuration
> from an earlier boot stage. In U-Boot's case there isn't an earlier boot
> stage so reconfiguring the NAND controller is required.
>
> Signed-off-by: Chris Packham <judge.packham at gmail.com>

Applied to u-boot-marvell/next

Thanks,
Stefan