[PATCH v2 09/14] clk: stub: Add Kconfig option for SPL stub driver

[Balaji Selvanathan]

drivers/clk/Makefile has a obj-$(CONFIG_$(PHASE_)CLK_STUB) in it but
there is no SPL_CLK_STUB config defined anywhere.

So, add SPL_CLK_STUB configuration option to enable the stub clock
driver in U-Boot SPL builds.

Signed-off-by: Balaji Selvanathan <balaji.selvanathan at oss.qualcomm.com>
---
Changes in v2:
- Modified the commit description to explicitly mention that
  drivers/clk/Makefile has a obj-$(CONFIG_$(PHASE_)CLK_STUB) in it
  but no SPL_CLK_STUB config is defined
---
 drivers/clk/Kconfig | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/clk/Kconfig b/drivers/clk/Kconfig
index c2da7b3938b..ca69577c060 100644
--- a/drivers/clk/Kconfig
+++ b/drivers/clk/Kconfig
@@ -114,6 +114,13 @@ config CLK_STUB
 	  Enable this to provide a stub clock driver for non-essential clock
 	  controllers.
 
+config SPL_CLK_STUB
+	bool "Stub clock driver in SPL"
+	depends on SPL_CLK
+	help
+	  Enable this to provide a stub clock driver for non-essential clock
+	  controllers in U-Boot SPL.
+
 config CLK_BCM6345
 	bool "Clock controller driver for BCM6345"
 	depends on CLK && ARCH_BMIPS

-- 
2.34.1