[PATCHv3 0/4] k3-am62-pocketbeagle2: add board and variant support

[Marko Mäkelä]

Hi Randolph, all,

I tested this together with the ECDSA patch series v8, on top of the 
current u-boot master.

I built a signed FIT image with Linux v7.1, target load address 
0x84000000 and device tree address 0x83000000. This did not clash with 
the $loadaddr of 0x82000000; the kernel address 0x81000000 would cause 
u-boot to crash and reboot.

The kernel booted fine, but the
https://www.beagleboard.org/distros/pocketbeagle-2-debian-13-5-2026-05-19-minimal-v6-12-x-ti
user space would fail to start up ZRAM. I guess it's simply because I 
did not make any kernel modules available yet. I was able to get into 
the login screen and shut down the system nevertheless.

My ultimate goal is to set up trusted boot on top of TF-A. The 
PocketBeagle 2 is a convenient development platform.

With best regards,

	Marko