[PATCH v4 19/64] usb: dwc3: import from kernel v4.16

[Marek Vasut]

On 6/29/26 10:43 AM, Jens Wiklander wrote:
> Sync Linux kernel dwc3 changes from v4.15 to v4.16.
> 
> The following files are preserved accross the import:
> Makefile Kconfig dwc3-meson-g12a.c dwc3-meson-gxl.c dwc3-omap.c
> dwc3-uniphier.c dwc3-generic.h dwc3-generic.c dwc3-generic-sti.c
> dwc3-layerscape.c ti_usb_phy.c
> 
> Skipping unused files:
> debugfs.c drd.c dwc3-exynos.c dwc3-haps.c dwc3-imx8mp.c dwc3-keystone.c
> dwc3-octeon.c dwc3-of-simple.c dwc3-pci.c dwc3-qcom.c dwc3-qcom-legacy.c
> dwc3-rtk.c dwc3-st.c dwc3-xilinx.c host.c trace.c trace.h ulpi.c
> 
> Note that this is a raw import and doesn't build.
> A fixup commit at the end of the series fixes that.
> 
> List of commits: git log --oneline v4.15..v4.16
> Commits imported:
> 084a804e0120 usb: dwc3: Fix lock-up on ID change during system suspend/resume
> 98112041bcca usb: dwc3: core: Fix ULPI PHYs and prevent phy_get/ulpi_init during suspend/resume
> b16ea8b9492e usb: dwc3: Fix GDBGFIFOSPACE_TYPE values
> c49f63055e25 usb: dwc3: omap: don't miss events during suspend/resume
> c4a5153e87fd usb: dwc3: core: Power-off core/PHYs on system_suspend in host mode
> 00b42170c86f usb: dwc3: Undo PHY init if soft reset fails
> f035d139ffec usb: dwc3: ep0: Reset TRB counter for ep0 IN
> 6180026341e8 usb: dwc3: gadget: Set maxpacket size for ep0 IN
> bff52352e0cc usb: dwc3: of-simple: fix oops by unbalanced clk disable call
> f1faf88c137b Merge tag 'phy-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/kishon/linux-phy into usb-next
> 958e052c5448 Merge tag 'usb-for-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-next
> d8c80bb3b55b phy: exynos5-usbdrd: Calibrate LOS levels for exynos5420/5800
> d9e3d899bc7a Merge 4.15-rc4 into usb-next
> 42bf02ec6e42 usb: dwc3: Allow disabling of metastability workaround
> 204ec1af6257 usb: dwc3: Make sparse a bit happier
> 19e0b203bfbd usb: dwc3: ep0: use gadget->isoch_delay for isoch_delay value
> 0c5d2954f690 usb: dwc3: debug: decode a few more features
> 
> Signed-off-by: Jens Wiklander <jens.wiklander at linaro.org>
> Tested-by: Alexey Charkov <alchark at flipper.net>
> ---
>   drivers/usb/dwc3/core.c   | 93 ++++++++++++++++++++++++++++-----------
>   drivers/usb/dwc3/core.h   | 26 +++++++----
>   drivers/usb/dwc3/debug.h  |  9 ++++
>   drivers/usb/dwc3/ep0.c    | 13 +++---
>   drivers/usb/dwc3/gadget.c |  8 +++-
>   5 files changed, 106 insertions(+), 43 deletions(-)
> 
> diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c
> index 07832509584f..e94bf91cc58a 100644
> --- a/drivers/usb/dwc3/core.c
> +++ b/drivers/usb/dwc3/core.c
> @@ -100,6 +100,8 @@ static void dwc3_set_prtcap(struct dwc3 *dwc, u32 mode)
>   	reg &= ~(DWC3_GCTL_PRTCAPDIR(DWC3_GCTL_PRTCAP_OTG));
>   	reg |= DWC3_GCTL_PRTCAPDIR(mode);
>   	dwc3_writel(dwc->regs, DWC3_GCTL, reg);
> +
> +	dwc->current_dr_role = mode;
>   }
>   
>   static void __dwc3_set_mode(struct work_struct *work)
> @@ -133,8 +135,6 @@ static void __dwc3_set_mode(struct work_struct *work)
>   
>   	dwc3_set_prtcap(dwc, dwc->desired_dr_role);
>   
> -	dwc->current_dr_role = dwc->desired_dr_role;
> -
>   	spin_unlock_irqrestore(&dwc->lock, flags);
>   
>   	switch (dwc->desired_dr_role) {
> @@ -147,6 +147,7 @@ static void __dwc3_set_mode(struct work_struct *work)
>   				otg_set_vbus(dwc->usb2_phy->otg, true);
>   			phy_set_mode(dwc->usb2_generic_phy, PHY_MODE_USB_HOST);
>   			phy_set_mode(dwc->usb3_generic_phy, PHY_MODE_USB_HOST);
> +			phy_calibrate(dwc->usb2_generic_phy);

Does this actually compile ? I don't think U-Boot code base contains 
phy_calibrate() function ?