[PATCH v2 0/2] imx6: fix LDB clock guard and clk0/clk1 swap

[Md Shofiqul Islam]

This v2 series fixes two issues with LDB display clock initialisation on
NXP i.MX6Q boards.

Changes since v1:
- Squashed original patches 1 and 3 into a single patch. Patch 3 was a
  correction to patch 1 based on Brian Ruley's review feedback
  (CONFIG_SPL_BUILD is too broad; CONFIG_SPL_VIDEO is the correct guard).
  Folding them together makes the intent clearer.
- Fixed Fixes: SHA to meet the 12-character minimum.

Regarding checkpatch IS_ENABLED() warnings in patch 1/2:
The guards in drivers/clk/imx/clk-imx6q.c wrap a static function
definition and its call site. IS_ENABLED() cannot be used for function
definitions, so #if is the only option there. The board-file guards
follow the same established pattern in adjacent code.

Md Shofiqul Islam (2):
  clk: imx6q: guard LDB clock init with appropriate video config
  imx6: clock: fix clk0/clk1 swap in select_ldb_di_clock_source()

 arch/arm/mach-imx/mx6/clock.c     |  4 ++--
 board/aristainetos/aristainetos.c  |  2 ++
 board/ge/b1x5v2/b1x5v2.c          |  3 ++-
 drivers/clk/imx/clk-imx6q.c       |  6 +++---
 4 files changed, 9 insertions(+), 6 deletions(-)