[PATCH v6 6/6] rockchip: rk3576-nanopi-m5: Enable UFS support

[Kever Yang]

On 2026/3/11 21:31, Alexey Charkov wrote:
> NanoPi M5 supports UFS modules to be inserted into its eMMC/UFS slot,
> using the on-chip UFS controller inside the RK3576 SoC.
>
> Enable respective drivers in its default config to be able to load
> kernels from UFS.
>
> Signed-off-by: Alexey Charkov <alchark at flipper.net>
Reviewed-by: Kever Yang <kever.yang at rock-chips.com>

Thanks,
- Kever
> ---
>   configs/nanopi-m5-rk3576_defconfig | 7 +++++++
>   1 file changed, 7 insertions(+)
>
> diff --git a/configs/nanopi-m5-rk3576_defconfig b/configs/nanopi-m5-rk3576_defconfig
> index 28427390a62b..558131bf81c5 100644
> --- a/configs/nanopi-m5-rk3576_defconfig
> +++ b/configs/nanopi-m5-rk3576_defconfig
> @@ -2,6 +2,7 @@ CONFIG_ARM=y
>   CONFIG_SKIP_LOWLEVEL_INIT=y
>   CONFIG_COUNTER_FREQUENCY=24000000
>   CONFIG_ARCH_ROCKCHIP=y
> +CONFIG_SPL_GPIO=y
>   CONFIG_SF_DEFAULT_SPEED=50000000
>   CONFIG_SF_DEFAULT_MODE=0x2000
>   CONFIG_DEFAULT_DEVICE_TREE="rockchip/rk3576-nanopi-m5"
> @@ -19,8 +20,10 @@ CONFIG_DEFAULT_FDT_FILE="rockchip/rk3576-nanopi-m5.dtb"
>   # CONFIG_DISPLAY_CPUINFO is not set
>   CONFIG_SPL_MAX_SIZE=0x40000
>   # CONFIG_SPL_RAW_IMAGE_SUPPORT is not set
> +CONFIG_SPL_DM_RESET=y
>   CONFIG_SPL_SPI_LOAD=y
>   CONFIG_SYS_SPI_U_BOOT_OFFS=0x60000
> +CONFIG_SPL_UFS_SUPPORT=y
>   CONFIG_CMD_MEMINFO=y
>   CONFIG_CMD_MEMINFO_MAP=y
>   CONFIG_CMD_ADC=y
> @@ -30,6 +33,7 @@ CONFIG_CMD_I2C=y
>   CONFIG_CMD_MISC=y
>   CONFIG_CMD_MMC=y
>   CONFIG_CMD_PCI=y
> +CONFIG_CMD_UFS=y
>   CONFIG_CMD_USB=y
>   CONFIG_CMD_ROCKUSB=y
>   CONFIG_CMD_USB_MASS_STORAGE=y
> @@ -63,6 +67,7 @@ CONFIG_PHY_ROCKCHIP_USBDP=y
>   CONFIG_DM_PMIC=y
>   CONFIG_PMIC_RK8XX=y
>   CONFIG_REGULATOR_RK8XX=y
> +CONFIG_SCSI=y
>   CONFIG_BAUDRATE=1500000
>   CONFIG_DEBUG_UART_SHIFT=2
>   CONFIG_SYS_NS16550_MEM32=y
> @@ -75,4 +80,6 @@ CONFIG_USB_DWC3_GENERIC=y
>   CONFIG_USB_GADGET=y
>   CONFIG_USB_GADGET_DOWNLOAD=y
>   CONFIG_USB_FUNCTION_ROCKUSB=y
> +CONFIG_UFS=y
> +CONFIG_UFS_ROCKCHIP=y
>   CONFIG_ERRNO_STR=y
>