[PATCH v1 3/3] mx6sabre: Move environment variables to .env files
Aristo Chen
aristo.chen at canonical.com
Wed Jun 10 15:24:24 CEST 2026
Move the shared environment from CFG_EXTRA_ENV_SETTINGS in
mx6sabre_common.h to a common text environment fragment in
include/env/nxp/mx6sabre_common.env. The mx6sabresd and mx6sabreauto
board environments include this fragment and add their own console
setting, which is the only board specific difference between them. The
eMMC firmware update variables remain guarded by CONFIG_SUPPORT_EMMC_BOOT
inside the fragment. The now unused CONSOLE_DEV defines and the
linux/stringify.h include are dropped.
The generated default environment is unchanged for both boards. This was
verified by comparing the output of scripts/get_default_envs.sh before
and after the change, which produced identical results.
Signed-off-by: Aristo Chen <aristo.chen at canonical.com>
---
board/nxp/mx6sabreauto/mx6sabreauto.env | 5 +
board/nxp/mx6sabresd/mx6sabresd.env | 5 +
include/configs/mx6sabre_common.h | 122 ------------------------
include/configs/mx6sabreauto.h | 1 -
include/configs/mx6sabresd.h | 1 -
include/env/nxp/mx6sabre_common.env | 114 ++++++++++++++++++++++
6 files changed, 124 insertions(+), 124 deletions(-)
create mode 100644 board/nxp/mx6sabreauto/mx6sabreauto.env
create mode 100644 board/nxp/mx6sabresd/mx6sabresd.env
create mode 100644 include/env/nxp/mx6sabre_common.env
diff --git a/board/nxp/mx6sabreauto/mx6sabreauto.env b/board/nxp/mx6sabreauto/mx6sabreauto.env
new file mode 100644
index 00000000000..31a16905ef5
--- /dev/null
+++ b/board/nxp/mx6sabreauto/mx6sabreauto.env
@@ -0,0 +1,5 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+
+console=ttymxc3
+
+#include <env/nxp/mx6sabre_common.env>
diff --git a/board/nxp/mx6sabresd/mx6sabresd.env b/board/nxp/mx6sabresd/mx6sabresd.env
new file mode 100644
index 00000000000..3608e931665
--- /dev/null
+++ b/board/nxp/mx6sabresd/mx6sabresd.env
@@ -0,0 +1,5 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+
+console=ttymxc0
+
+#include <env/nxp/mx6sabre_common.env>
diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
index ef2848b71f3..d3a57a10a16 100644
--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
@@ -8,133 +8,11 @@
#ifndef __MX6QSABRE_COMMON_CONFIG_H
#define __MX6QSABRE_COMMON_CONFIG_H
-#include <linux/stringify.h>
-
#include "mx6_common.h"
/* MMC Configs */
#define CFG_SYS_FSL_ESDHC_ADDR 0
-#ifdef CONFIG_SUPPORT_EMMC_BOOT
-#define EMMC_ENV \
- "emmcdev=2\0" \
- "update_emmc_firmware=" \
- "if test ${ip_dyn} = yes; then " \
- "setenv get_cmd dhcp; " \
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
- "if ${get_cmd} ${update_sd_firmware_filename}; then " \
- "if mmc dev ${emmcdev} 1; then " \
- "setexpr fw_sz ${filesize} / 0x200; " \
- "setexpr fw_sz ${fw_sz} + 1; " \
- "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
- "fi; " \
- "fi\0"
-#else
-#define EMMC_ENV ""
-#endif
-
-#define CFG_EXTRA_ENV_SETTINGS \
- "script=boot.scr\0" \
- "image=zImage\0" \
- "fdtfile=undefined\0" \
- "fdt_addr=0x18000000\0" \
- "boot_fdt=try\0" \
- "ip_dyn=yes\0" \
- "console=" CONSOLE_DEV "\0" \
- "dfuspi=dfu 0 sf 0:0:10000000:0\0" \
- "dfu_alt_info_spl=spl raw 0x400\0" \
- "dfu_alt_info_img=u-boot raw 0x10000\0" \
- "dfu_alt_info=spl raw 0x400\0" \
- "initrd_high=0xffffffff\0" \
- "splashimage=" __stringify(CONFIG_SYS_LOAD_ADDR) "\0" \
- "mmcdev=" __stringify(CONFIG_ENV_MMC_DEVICE_INDEX) "\0" \
- "mmcpart=1\0" \
- "finduuid=part uuid mmc ${mmcdev}:2 uuid\0" \
- "update_sd_firmware=" \
- "if test ${ip_dyn} = yes; then " \
- "setenv get_cmd dhcp; " \
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
- "if mmc dev ${mmcdev}; then " \
- "if ${get_cmd} ${update_sd_firmware_filename}; then " \
- "setexpr fw_sz ${filesize} / 0x200; " \
- "setexpr fw_sz ${fw_sz} + 1; " \
- "mmc write ${loadaddr} 0x2 ${fw_sz}; " \
- "fi; " \
- "fi\0" \
- EMMC_ENV \
- "mmcargs=setenv bootargs console=${console},${baudrate} " \
- "root=PARTUUID=${uuid} rootwait rw\0" \
- "loadbootscript=" \
- "load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script} || " \
- "load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot/${script};\0" \
- "bootscript=echo Running bootscript from mmc ...; " \
- "source\0" \
- "loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image} || " \
- "load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot/${image}\0" \
- "loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile} || " \
- "load mmc ${mmcdev}:${mmcpart} ${fdt_addr} boot/${fdtfile}\0" \
- "mmcboot=echo Booting from mmc ...; " \
- "run finduuid; " \
- "run mmcargs; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if run loadfdt; then " \
- "bootz ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootz; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootz; " \
- "fi;\0" \
- "netargs=setenv bootargs console=${console},${baudrate} " \
- "root=/dev/nfs " \
- "ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp\0" \
- "netboot=echo Booting from net ...; " \
- "run netargs; " \
- "if test ${ip_dyn} = yes; then " \
- "setenv get_cmd dhcp; " \
- "else " \
- "setenv get_cmd tftp; " \
- "fi; " \
- "${get_cmd} ${image}; " \
- "if test ${boot_fdt} = yes || test ${boot_fdt} = try; then " \
- "if ${get_cmd} ${fdt_addr} ${fdtfile}; then " \
- "bootz ${loadaddr} - ${fdt_addr}; " \
- "else " \
- "if test ${boot_fdt} = try; then " \
- "bootz; " \
- "else " \
- "echo WARN: Cannot load the DT; " \
- "fi; " \
- "fi; " \
- "else " \
- "bootz; " \
- "fi;\0" \
- "findfdt="\
- "if test $fdtfile = undefined; then " \
- "if test $board_name = SABREAUTO && test $board_rev = MX6QP; then " \
- "setenv fdtfile imx6qp-sabreauto.dtb; fi; " \
- "if test $board_name = SABREAUTO && test $board_rev = MX6Q; then " \
- "setenv fdtfile imx6q-sabreauto.dtb; fi; " \
- "if test $board_name = SABREAUTO && test $board_rev = MX6DL; then " \
- "setenv fdtfile imx6dl-sabreauto.dtb; fi; " \
- "if test $board_name = SABRESD && test $board_rev = MX6QP; then " \
- "setenv fdtfile imx6qp-sabresd.dtb; fi; " \
- "if test $board_name = SABRESD && test $board_rev = MX6Q; then " \
- "setenv fdtfile imx6q-sabresd.dtb; fi; " \
- "if test $board_name = SABRESD && test $board_rev = MX6DL; then " \
- "setenv fdtfile imx6dl-sabresd.dtb; fi; " \
- "if test $fdtfile = undefined; then " \
- "echo WARNING: Could not determine dtb to use; fi; " \
- "fi;\0" \
-
/* Physical Memory Map */
#define PHYS_SDRAM MMDC0_ARB_BASE_ADDR
diff --git a/include/configs/mx6sabreauto.h b/include/configs/mx6sabreauto.h
index e491af3e927..b5602def87d 100644
--- a/include/configs/mx6sabreauto.h
+++ b/include/configs/mx6sabreauto.h
@@ -9,7 +9,6 @@
#define __MX6SABREAUTO_CONFIG_H
#define CFG_MXC_UART_BASE UART4_BASE
-#define CONSOLE_DEV "ttymxc3"
#define CFG_SYS_I2C_PCA953X_WIDTH { {0x30, 8}, {0x32, 8}, {0x34, 8} }
diff --git a/include/configs/mx6sabresd.h b/include/configs/mx6sabresd.h
index e34947c94d0..1ea08f835dd 100644
--- a/include/configs/mx6sabresd.h
+++ b/include/configs/mx6sabresd.h
@@ -9,7 +9,6 @@
#define __MX6SABRESD_CONFIG_H
#define CFG_MXC_UART_BASE UART1_BASE
-#define CONSOLE_DEV "ttymxc0"
#include "mx6sabre_common.h"
diff --git a/include/env/nxp/mx6sabre_common.env b/include/env/nxp/mx6sabre_common.env
new file mode 100644
index 00000000000..5346cd4e953
--- /dev/null
+++ b/include/env/nxp/mx6sabre_common.env
@@ -0,0 +1,114 @@
+/* SPDX-License-Identifier: (GPL-2.0+ OR MIT) */
+
+script=boot.scr
+image=zImage
+fdtfile=undefined
+fdt_addr=0x18000000
+boot_fdt=try
+ip_dyn=yes
+dfuspi=dfu 0 sf 0:0:10000000:0
+dfu_alt_info_spl=spl raw 0x400
+dfu_alt_info_img=u-boot raw 0x10000
+dfu_alt_info=spl raw 0x400
+initrd_high=0xffffffff
+splashimage=CONFIG_SYS_LOAD_ADDR
+mmcdev=CONFIG_ENV_MMC_DEVICE_INDEX
+mmcpart=1
+finduuid=part uuid mmc ${mmcdev}:2 uuid
+update_sd_firmware=if test ${ip_dyn} = yes; then
+ setenv get_cmd dhcp;
+ else
+ setenv get_cmd tftp;
+ fi;
+ if mmc dev ${mmcdev}; then
+ if ${get_cmd} ${update_sd_firmware_filename}; then
+ setexpr fw_sz ${filesize} / 0x200;
+ setexpr fw_sz ${fw_sz} + 1;
+ mmc write ${loadaddr} 0x2 ${fw_sz};
+ fi;
+ fi
+#ifdef CONFIG_SUPPORT_EMMC_BOOT
+emmcdev=2
+update_emmc_firmware=if test ${ip_dyn} = yes; then
+ setenv get_cmd dhcp;
+ else
+ setenv get_cmd tftp;
+ fi;
+ if ${get_cmd} ${update_sd_firmware_filename}; then
+ if mmc dev ${emmcdev} 1; then
+ setexpr fw_sz ${filesize} / 0x200;
+ setexpr fw_sz ${fw_sz} + 1;
+ mmc write ${loadaddr} 0x2 ${fw_sz};
+ fi;
+ fi
+#endif
+mmcargs=setenv bootargs console=${console},${baudrate} root=PARTUUID=${uuid} rootwait rw
+loadbootscript=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${script} ||
+ load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot/${script};
+bootscript=echo Running bootscript from mmc ...; source
+loadimage=load mmc ${mmcdev}:${mmcpart} ${loadaddr} ${image} ||
+ load mmc ${mmcdev}:${mmcpart} ${loadaddr} boot/${image}
+loadfdt=load mmc ${mmcdev}:${mmcpart} ${fdt_addr} ${fdtfile} ||
+ load mmc ${mmcdev}:${mmcpart} ${fdt_addr} boot/${fdtfile}
+mmcboot=echo Booting from mmc ...;
+ run finduuid;
+ run mmcargs;
+ if test ${boot_fdt} = yes || test ${boot_fdt} = try; then
+ if run loadfdt; then
+ bootz ${loadaddr} - ${fdt_addr};
+ else
+ if test ${boot_fdt} = try; then
+ bootz;
+ else
+ echo WARN: Cannot load the DT;
+ fi;
+ fi;
+ else
+ bootz;
+ fi;
+netargs=setenv bootargs console=${console},${baudrate} root=/dev/nfs
+ ip=dhcp nfsroot=${serverip}:${nfsroot},v3,tcp
+netboot=echo Booting from net ...;
+ run netargs;
+ if test ${ip_dyn} = yes; then
+ setenv get_cmd dhcp;
+ else
+ setenv get_cmd tftp;
+ fi;
+ ${get_cmd} ${image};
+ if test ${boot_fdt} = yes || test ${boot_fdt} = try; then
+ if ${get_cmd} ${fdt_addr} ${fdtfile}; then
+ bootz ${loadaddr} - ${fdt_addr};
+ else
+ if test ${boot_fdt} = try; then
+ bootz;
+ else
+ echo WARN: Cannot load the DT;
+ fi;
+ fi;
+ else
+ bootz;
+ fi;
+findfdt=if test $fdtfile = undefined; then
+ if test $board_name = SABREAUTO && test $board_rev = MX6QP; then
+ setenv fdtfile imx6qp-sabreauto.dtb;
+ fi;
+ if test $board_name = SABREAUTO && test $board_rev = MX6Q; then
+ setenv fdtfile imx6q-sabreauto.dtb;
+ fi;
+ if test $board_name = SABREAUTO && test $board_rev = MX6DL; then
+ setenv fdtfile imx6dl-sabreauto.dtb;
+ fi;
+ if test $board_name = SABRESD && test $board_rev = MX6QP; then
+ setenv fdtfile imx6qp-sabresd.dtb;
+ fi;
+ if test $board_name = SABRESD && test $board_rev = MX6Q; then
+ setenv fdtfile imx6q-sabresd.dtb;
+ fi;
+ if test $board_name = SABRESD && test $board_rev = MX6DL; then
+ setenv fdtfile imx6dl-sabresd.dtb;
+ fi;
+ if test $fdtfile = undefined; then
+ echo WARNING: Could not determine dtb to use;
+ fi;
+ fi;
--
2.43.0
More information about the U-Boot
mailing list