[PATCH v3 2/4] misc: ele_api: Add support for XSPI SET GMID command

[alice.guo at oss.nxp.com]

From: Ye Li <ye.li at nxp.com>

The XSPI SET GMID command is used to assign GMID ownership to the
requester, allowing access to protected XSPI control registers. This API
must be called in SPL if XSPI GMID-protected settings need to be
modified. Otherwise, XSPI configuration depends on the previous GMID
owner to provide the correct settings.

Signed-off-by: Ye Li <ye.li at nxp.com>
Signed-off-by: Alice Guo <alice.guo at nxp.com>
---
 arch/arm/include/asm/mach-imx/ele_api.h |  2 ++
 drivers/misc/imx_ele/ele_api.c          | 28 ++++++++++++++++++++++++++++
 2 files changed, 30 insertions(+)

diff --git a/arch/arm/include/asm/mach-imx/ele_api.h b/arch/arm/include/asm/mach-imx/ele_api.h
index 4e1afc42bd8..04e7f20a2a6 100644
--- a/arch/arm/include/asm/mach-imx/ele_api.h
+++ b/arch/arm/include/asm/mach-imx/ele_api.h
@@ -49,6 +49,7 @@
 #define ELE_ATTEST_REQ (0xDB)
 #define ELE_RELEASE_PATCH_REQ (0xDC)
 #define ELE_OTP_SEQ_SWITH_REQ (0xDD)
+#define ELE_SET_GMID_REQ (0xE4)
 #define ELE_WRITE_SHADOW_REQ (0xF2)
 #define ELE_READ_SHADOW_REQ (0xF3)
 
@@ -162,6 +163,7 @@ int ele_return_lifecycle_update(ulong signed_msg_blk, u32 *response);
 int ele_start_rng(void);
 int ele_write_shadow_fuse(u32 fuse_id, u32 fuse_val, u32 *response);
 int ele_read_shadow_fuse(u32 fuse_id, u32 *fuse_val, u32 *response);
+int ele_set_gmid(u32 *response);
 int ele_volt_change_start_req(void);
 int ele_volt_change_finish_req(void);
 #endif
diff --git a/drivers/misc/imx_ele/ele_api.c b/drivers/misc/imx_ele/ele_api.c
index e7aee0fcef1..8ee0a7733ca 100644
--- a/drivers/misc/imx_ele/ele_api.c
+++ b/drivers/misc/imx_ele/ele_api.c
@@ -844,3 +844,31 @@ int ele_volt_change_finish_req(void)
 
 	return ret;
 }
+
+int ele_set_gmid(u32 *response)
+{
+	struct udevice *dev = gd->arch.ele_dev;
+	int size = sizeof(struct ele_msg);
+	struct ele_msg msg = {};
+	int ret;
+
+	if (!dev) {
+		printf("ele dev is not initialized\n");
+		return -ENODEV;
+	}
+
+	msg.version = ELE_VERSION;
+	msg.tag = ELE_CMD_TAG;
+	msg.size = 1;
+	msg.command = ELE_SET_GMID_REQ;
+
+	ret = misc_call(dev, false, &msg, size, &msg, size);
+	if (ret)
+		printf("Error: %s: ret %d, response 0x%x\n",
+		       __func__, ret, msg.data[0]);
+
+	if (response)
+		*response = msg.data[0];
+
+	return ret;
+}

-- 
2.43.0