March 2026 Archives by author

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...

Starting: Sun Mar 1 01:11:03 CET 2026
Ending: Wed Mar 11 23:01:12 CET 2026
Messages: 772

• [PATCH 0/5] imx9{4,5}: Add Quickboot support   Simona Toaca (OSS)
• [PATCH 1/5] imx9: Add support for saving DDR training data to NVM   Simona Toaca (OSS)
• [PATCH 2/5] arm: mach-imx: Add command to expose QB functionality   Simona Toaca (OSS)
• [PATCH 3/5] imx9: Enable QB data saving for iMX9{4,5} EVK   Simona Toaca (OSS)
• [PATCH 4/5] board: nxp: imx9{4,5}_evk: Add qb save option in SPL   Simona Toaca (OSS)
• [PATCH 5/5] doc: board: nxp: Add Quickboot documentation   Simona Toaca (OSS)
• [PATCH v2] net: phy: air_en8811: add support for Airoha AN8811HB PHY   Tommy Shih (施易廷)
• [PATCH v2 2/2] board: mediatek: add MT8395 EVK board support   Macpaul Lin (林智斌)
• [PATCH v2 1/2] arm: mediatek: MT8195 fix mem_map   Macpaul Lin (林智斌)
• [PATCH 01/14] clk: mediatek: move common PARENT macros to header   Macpaul Lin (林智斌)
• [PATCH 02/14] clk: mediatek: mt7622: convert to struct mtk_parent   Macpaul Lin (林智斌)
• [PATCH 09/14] clk: mediatek: mt8365: convert to struct mtk_parent   Macpaul Lin (林智斌)
• [PATCH 08/14] clk: mediatek: mt8195: convert to struct mtk_parent   Macpaul Lin (林智斌)
• [PATCH 07/14] clk: mediatek: mt8188: convert to struct mtk_parent   Macpaul Lin (林智斌)
• [PATCH 13/14] clk: mediatek: remove CLK_PARENT_MIXED flag   Macpaul Lin (林智斌)
• [PATCH 14/14] clk: mediatek: refactor duplicate *_mux_get_rate()   Macpaul Lin (林智斌)
• [PATCH v4 1/7] clk: mediatek: use correct struct type for infrasys clocks   Macpaul Lin (林智斌)
• [PATCH v4 5/7] clk: mediatek: add MUX_MIXED_CLR_SET_UPD_FLAGS() macro   Macpaul Lin (林智斌)
• [PATCH v4 7/7] clk: mediatek: add clock driver for MT8189   Macpaul Lin (林智斌)
• [PATCH 1/3] pinctl: mediatek: add bounds check on number of base addresses   Macpaul Lin (林智斌)
• [PATCH v6 1/7] mips: loongson: minimal initial SoC support   sgdfkk at 163.com
• [PATCH v6 5/7] mips: loongson: add clk driver   sgdfkk at 163.com
• [PATCH v6 0/7] add loongson mips ls1c300 initial support   sgdfkk at 163.com
• [PATCH v6 1/7] mips: loongson: minimal initial SoC support   sgdfkk at 163.com
• [PATCH v6 2/7] mips: loongson: lowlevel initialize   sgdfkk at 163.com
• [PATCH v6 3/7] mips: loongson: lowlevel debug serial   sgdfkk at 163.com
• [PATCH v6 4/7] mips: loongson: ls1c300 board support   sgdfkk at 163.com
• [PATCH v6 5/7] mips: loongson: add clk driver   sgdfkk at 163.com
• [PATCH v6 6/7] mips: loongson: add watchdog driver   sgdfkk at 163.com
• [PATCH v6 7/7] mips: loongson: ls1c300 dts and bindings   sgdfkk at 163.com
• [PATCH] MAINTAINERS: update SPI NOR reviewer   Tudor Ambarus
• [PATCH] kbuild: fix cross_tools compilation   Ilias Apalodimas
• [PATCH] tpm: Add wolfTPM library support for TPM 2.0   Ilias Apalodimas
• [PATCH] kbuild: unexport sub_make_done to fix child make invocations   Ilias Apalodimas
• [PATCH v2 1/4] lib: uuid: add EBBR 2.1 conformance profile GUID   Ilias Apalodimas
• [PATCH v2 3/4] cmd: efidebug: add ecpt command   Ilias Apalodimas
• [PATCH v2 2/4] efi_loader: export efi_ecpt_guid   Ilias Apalodimas
• [PATCH 1/1] ufs: don't select non-existent CONFIG_PHY_MTK_UFS   Neil Armstrong
• [PATCH] ufs: Disable UTP command timeout in slow mode   Neil Armstrong
• [PATCH] drivers: ufs: remove unused ufs_post_bind() declaration   Neil Armstrong
• [PATCH v2 0/3] drivers: ufs: ufs_hba_ops callbacks cleanup   Neil Armstrong
• [PATCH] Add an initial CONTRIBUTE.rst   Neil Armstrong
• [PATCH v2 2/3] drivers: ufs: add helper for phy_initialization callback   Neil Armstrong
• [PATCH 1/2] fastboot: Add UFS flash backend   Neil Armstrong
• [GIT PULL] Please pull u-boot-ufs-20260304   Neil Armstrong
• [PATCH v5 0/4] Enable full UFS boot on Rockchip RK3576   Neil Armstrong
• [PATCH] liebherr: btt: Fix buffer overflow in board_fit_config_name_match   Francois Berder
• [PATCH v2 0/7] mkimage: Detect FIT image load address overlaps and fix related test/DTS issues   Bryan Brattlof
• [BUG] Latest GEN5 socfpga handoff python script sanity issue   Sune Brian
• [BUG] Latest GEN5 socfpga handoff python script sanity issue   Sune Brian
• [hack] help U-Boot find the correct PCIe inbound offset for NVMe on Raspberry Pi 5   Matthias Brugger
• [PATCH v2] pinctrl: bcm283x: Fix GPIO pull state register values for BCM2711   Matthias Brugger
• [PATCH] video: stm32: dsi: add .of_to_plat callback   Patrice CHOTARD
• [PATCH v2 1/4] scmi: pinctrl: add pinctrl message IDs   Dan Carpenter
• [PATCH v2 2/4] scmi: update comments for scmi_pinctrl_config_set_in()   Dan Carpenter
• [PATCH v2 3/4] scmi: pinctrl: add pinctrl driver for SCMI   Dan Carpenter
• [PATCH v2 4/4] gpio: scmi: Add gpio_scmi driver   Dan Carpenter
• [PATCH v5 0/4] Enable full UFS boot on Rockchip RK3576   Alexey Charkov
• [PATCH v5 0/4] Enable full UFS boot on Rockchip RK3576   Alexey Charkov
• [PATCH v5 0/4] Enable full UFS boot on Rockchip RK3576   Alexey Charkov
• [PATCH v5 4/4] rockchip: spl: Add support for booting from UFS   Alexey Charkov
• [PATCH v6 0/6] Enable full UFS boot on Rockchip RK3576   Alexey Charkov
• [PATCH v6 1/6] arm64: dts: rockchip: Explicitly request UFS reset pin on RK3576   Alexey Charkov
• [PATCH v6 2/6] arm64: dts: rockchip: enable UFS controller on FriendlyElec NanoPi M5   Alexey Charkov
• [PATCH v6 3/6] reset: rockchip: make device resets available in SPL   Alexey Charkov
• [PATCH v6 4/6] rockchip: spl: Add support for booting from UFS   Alexey Charkov
• [PATCH v6 5/6] rockchip: rk3576-rock-4d: Enable UFS support   Alexey Charkov
• [PATCH v6 6/6] rockchip: rk3576-nanopi-m5: Enable UFS support   Alexey Charkov
• [PATCH] board: ti: j7*: Update rm-cfg and tifs-rm-cfg   Chawdhry, Manorit
• [PATCH next v2] arm: mach-k3: use Kconfig options for ATF/OPTEE size   Chawdhry, Manorit
• [PATCH v2 0/7] mkimage: Detect FIT image load address overlaps and fix related test/DTS issues   Aristo Chen
• [PATCH v4 13/17] m68k: Call bootm_final()   Kuan-Wei Chiu
• [PATCH] serial: goldfish: Add DEBUG_UART support   Kuan-Wei Chiu
• [PATCH v2 2/3] m68k: m680x0: Initialise the debug uart   Kuan-Wei Chiu
• [PATCH v2 1/3] serial: goldfish: Add debug uart support   Kuan-Wei Chiu
• [PATCH v2 1/3] serial: goldfish: Add debug uart support   Kuan-Wei Chiu
• [PATCH v4 1/4] iopoll: Fix read_poll_timeout macro documentation   Ariel D'Alessandro
• [PATCH v4 2/4] iopoll: Improve handling of timeout_us param in read_poll_timeout macro   Ariel D'Alessandro
• [PATCH] common: spl: spl_dfu.c: Fix warning associated with PCI subclass_code   Anshul Dalal
• [PATCH next] include: env: ti: move board specific scripts out of ti_common   Anshul Dalal
• [PATCH next] arm: mach-k3: use Kconfig options for ATF/OPTEE size   Anshul Dalal
• [PATCH] mach-k3: common: init gd->bd before dram_init_banksize   Anshul Dalal
• [PATCH next] arm: mach-k3: use Kconfig options for ATF/OPTEE size   Anshul Dalal
• [PATCH next v2] arm: mach-k3: use Kconfig options for ATF/OPTEE size   Anshul Dalal
• [PATCH v3 1/4] iopoll: Fix read_poll_timeout macro documentation   Ronan Dalton
• [PATCH v3 2/4] iopoll: Improve handling of timeout_us param in read_poll_timeout macro   Ronan Dalton
• [PATCH v3 3/4] usb: Add code spacing in usb_bulk_msg function   Ronan Dalton
• [PATCH v3 4/4] usb: Convert ad-hoc poll/timeout sequences in usb.c to iopoll   Ronan Dalton
• [PATCH v3 2/4] iopoll: Improve handling of timeout_us param in read_poll_timeout macro   Ronan Dalton
• [PATCH v3 4/4] usb: Convert ad-hoc poll/timeout sequences in usb.c to iopoll   Ronan Dalton
• [PATCH v4 1/4] iopoll: Fix read_poll_timeout macro documentation   Ronan Dalton
• [PATCH v4 2/4] iopoll: Improve handling of timeout_us param in read_poll_timeout macro   Ronan Dalton
• [PATCH v4 3/4] usb: Add code spacing in usb_bulk_msg function   Ronan Dalton
• [PATCH v4 4/4] usb: Convert ad-hoc poll/timeout sequences in usb.c to iopoll   Ronan Dalton
• Binman and blobs   Andrew Davis
• [PATCH next] arm: mach-k3: use Kconfig options for ATF/OPTEE size   Andrew Davis
• [PATCH v1] common/memsize.c: Fix get_ram_size() original data restore   Francesco Dolcini
• [PATCH 1/4] ddr: imx: Remove duplicate includes   Francesco Dolcini
• [PATCH v1 0/2] DDR configuration refactor and 16GB dual-rank support   Francesco Dolcini
• [PATCH next] arm: mach-k3: use Kconfig options for ATF/OPTEE size   Francesco Dolcini
• [PATCH 4/5] board: nxp: imx9{4,5}_evk: Add qb save option in SPL   Francesco Dolcini
• [PATCH v1] spi: designware: add support for bits-per-word DT binding   Conor Dooley
• [PATCH] kbuild: unexport sub_make_done to fix child make invocations   Conor Dooley
• [PATCH v1] spi: designware: add support for bits-per-word DT binding   Conor Dooley
• [PATCH] kbuild: unexport sub_make_done to fix child make invocations   Conor Dooley
• [PATCH] kbuild: unexport sub_make_done to fix child make invocations   Conor Dooley
• [PATCH v3 13/17] m68k: Call bootm_final()   Angelo Dureghello
• [PATCH v3 13/17] m68k: Call bootm_final()   Angelo Dureghello
• [PATCH v2 2/3] m68k: m680x0: Initialise the debug uart   Angelo Dureghello
• [PATCH v0] Fix NVMe for non-zero bus offsets   Torsten Duwe
• [hack] help U-Boot find the correct PCIe inbound offset for NVMe on Raspberry Pi 5   Torsten Duwe
• [hack] help U-Boot find the correct PCIe inbound offset for NVMe on Raspberry Pi 5   Torsten Duwe
• [PATCH v3 11/13] arm64: dts: freescale: Add i.MX952 EVK basic device tree   Fabio Estevam
• [PATCH 4/5] board: nxp: imx9{4,5}_evk: Add qb save option in SPL   Fabio Estevam
• [hack] help U-Boot find the correct PCIe inbound offset for NVMe on Raspberry Pi 5   Pedro Falcato
• [PATCH v3 1/4] spi: nxp_xspi: Add new driver for NXP XSPI controller   Peng Fan
• [PATCH v3 2/4] misc: ele_api: Add support for XSPI SET GMID command   Peng Fan
• [PATCH v3 3/4] imx94_evk: Get ownership of XSPI control registers protected by GMID in SPL   Peng Fan
• [PATCH v2 14/16] power: pmic: add support for Spacemit P1 PMIC   Peng Fan
• [PATCH v2 15/16] power: regulator: add support for Spacemit P1 SoC   Peng Fan
• [PATCH 0/4] Minor i.MX DDR init clean-up   Peng Fan
• [PATCH] FIT: Address Secure Boot Bypass for Signed FIT Images   Ahmad Fatoum
• [PATCH] boot: Add fit_config_get_hash_list() to build signed node list   Ahmad Fatoum
• [PATCH v2] boot: Add fit_config_get_hash_list() to build signed node list   Ahmad Fatoum
• [PATCH 1/1] net: do not use non-existent CONFIG_DM_CLK   Jerome Forissier
• Security Disclosure: Multiple buffer overflow vulnerabilities in NFS client   Jerome Forissier
• Security Disclosure: Multiple buffer overflow vulnerabilities in NFS client   Jerome Forissier
• [PATCH] net: lwip: scale buffer pool size with TFTP block size   Jerome Forissier
• [PATCH] net: lwip: Fix PBUF_POOL_BUFSIZE when PROT_TCP_LWIP is disabled   Jerome Forissier
• [PATCH] net: Move network PHY under NETDEVICES   Jerome Forissier
• [PATCH] mach-k3: common: init gd->bd before dram_init_banksize   Francis, Neha
• [PATCH] video: stm32: dsi: add .of_to_plat callback   Raphaël Gallais-Pou
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Raphaël Gallais-Pou
• [PATCH] tpm: Add wolfTPM library support for TPM 2.0   Aidan Garske
• [PATCH 0/4] mtd: rawnand: sunxi: Fixes user data length for H6   Richard Genoud
• [PATCH 1/4] mtd: rawnand: sunxi: Replace hard coded value by a define   Richard Genoud
• [PATCH 2/4] mtd: rawnand: sunxi: make the code mode self-explanatory   Richard Genoud
• [PATCH 3/4] mtd: rawnand: sunxi: introduce variable user data length   Richard Genoud
• [PATCH 4/4] mtd: nand: raw: sunxi_spl: remove user data length reset   Richard Genoud
• [PATCH v1] common/memsize.c: Fix get_ram_size() original data restore   Emanuele Ghidoli
• [PATCH v1 0/2] DDR configuration refactor and 16GB dual-rank support   Emanuele Ghidoli
• [PATCH v1 1/2] board: toradex: aquila-am69: refactor memory configuration   Emanuele Ghidoli
• [PATCH v1 2/2] board: toradex: aquila-am69: Add support for 16GB dual rank memory configuration   Emanuele Ghidoli
• [PATCH 4/5] board: nxp: imx9{4,5}_evk: Add qb save option in SPL   Emanuele Ghidoli
• [PATCH v2] gunzip: Implement chunked decompression   Simon Glass
• [PATCH] FIT: Address Secure Boot Bypass for Signed FIT Images   Simon Glass
• [RFC PATCH 04/16] binman: test: Move FIT image test files to test/fit/   Simon Glass
• Binman and blobs   Simon Glass
• [RFC PATCH 00/16] binman: test: Organise test files into subdirectories   Simon Glass
• Fix x86 baytrail boot flow, UPD/VPD Updates   Simon Glass
• [PATCH] FIT: Address Secure Boot Bypass for Signed FIT Images   Simon Glass
• [PATCH] boot: Add fit_config_get_hash_list() to build signed node list   Simon Glass
• [PATCH] kbuild: unexport sub_make_done to fix child make invocations   Simon Glass
• [PATCH v2] kbuild: strip sub_make_done from test-script environment   Simon Glass
• [PATCH v2] boot: Add fit_config_get_hash_list() to build signed node list   Simon Glass
• [PATCH] boot: Add fit_config_get_hash_list() to build signed node list   Simon Glass
• [PATCH v4 00/17] bootm: Clean up arch-specific, pre-OS clean-up   Simon Glass
• [PATCH v4 01/17] dm: Move flags_remove() check before child removal   Simon Glass
• [PATCH v4 02/17] dm: Remove children when parent is removed by flags   Simon Glass
• [PATCH v4 03/17] bootstage: Add some missing dummy functions   Simon Glass
• [PATCH v4 04/17] bootm: Create bootm_final() for pre-boot cleanup   Simon Glass
• [PATCH v4 05/17] x86: Call bootm_final()   Simon Glass
• [PATCH v4 06/17] riscv: Call bootm_final()   Simon Glass
• [PATCH v4 07/17] bootm: Stash bootstage data in bootm_final()   Simon Glass
• [PATCH v4 08/17] arm: Call bootm_final()   Simon Glass
• [PATCH v4 09/17] arc: Call bootm_final()   Simon Glass
• [PATCH v4 10/17] microblaze: Call bootm_final()   Simon Glass
• [PATCH v4 11/17] mips: Call bootm_final()   Simon Glass
• [PATCH v4 12/17] powerpc: Call bootm_final()   Simon Glass
• [PATCH v4 13/17] m68k: Call bootm_final()   Simon Glass
• [PATCH v4 14/17] nios2: Call bootm_final()   Simon Glass
• [PATCH v4 15/17] sh: Call bootm_final()   Simon Glass
• [PATCH v4 16/17] xtensa: Call bootm_final()   Simon Glass
• [PATCH v4 17/17] sandbox: Call bootm_final()   Simon Glass
• [PATCH v2 00/23] binman: test: Organise test files into subdirectories   Simon Glass
• [PATCH v2 01/23] binman: test: Capture output from tests with warnings   Simon Glass
• [PATCH v2 02/23] binman: test: Move pack/layout test files to test/pack/   Simon Glass
• [PATCH v2 03/23] binman: test: Move U-Boot variant test files to test/xpl/   Simon Glass
• [PATCH v2 04/23] binman: test: Move x86 and Intel test files to test/x86/   Simon Glass
• [PATCH v2 05/23] binman: test: Move FIT image test files to test/fit/   Simon Glass
• [PATCH v2 06/23] binman: test: Move FDT/fdtmap test files to test/fdt/   Simon Glass
• [PATCH v2 07/23] binman: test: Move blob test files to test/blob/   Simon Glass
• [PATCH v2 08/23] binman: test: Move security test files to test/security/   Simon Glass
• [PATCH v2 09/23] binman: test: Move CBFS test files to test/cbfs/   Simon Glass
• [PATCH v2 10/23] binman: test: Move ChromeOS test files to test/cros/   Simon Glass
• [PATCH v2 11/23] binman: test: Move mkimage test files to test/mkimage/   Simon Glass
• [PATCH v2 12/23] binman: test: Move FIP/TF-A test files to test/fip/   Simon Glass
• [PATCH v2 13/23] binman: test: Move UEFI capsule test files to test/capsule/   Simon Glass
• [PATCH v2 14/23] binman: test: Move vendor-specific test files to test/vendor/   Simon Glass
• [PATCH v2 15/23] binman: test: Move symbol test files to test/symbols/   Simon Glass
• [PATCH v2 16/23] binman: test: Move remaining test files to test/entry/   Simon Glass
• [PATCH v2 17/23] binman: test: Move x86 binary test data to test/x86/   Simon Glass
• [PATCH v2 18/23] binman: test: Move FIT signing test data to test/fit/   Simon Glass
• [PATCH v2 19/23] binman: test: Move shared key files to test/security/   Simon Glass
• [PATCH v2 20/23] binman: test: Fix code coverage for iMX8 and cst bintool   Simon Glass
• [PATCH v2 21/23] binman: Remove the coverage allow_failures list   Simon Glass
• [PATCH v2 22/23] binman: Drop the allow_failures parameter from run_test_coverage()   Simon Glass
• [PATCH v2 23/23] binman: doc: Update binman_tests.rst for subdirectory layout   Simon Glass
• [PATCH v3 0/7] Provide classes for building disk images with FS partitions   Simon Glass
• [PATCH v3 1/7] test: fs_helper: Allow passing the image filename   Simon Glass
• [PATCH v3 2/7] test: fs_helper: Add a quiet flag to mk_fs()   Simon Glass
• [PATCH v3 3/7] test: Update comment for fs_helper.setup_image()   Simon Glass
• [PATCH v3 4/7] test: fs_helper: Drop the size_gran argument   Simon Glass
• [PATCH v3 5/7] test: Convert fs_helper to use a class   Simon Glass
• [PATCH v3 6/7] test: Add a helper class to create disk images   Simon Glass
• [PATCH v3 7/7] test: Convert test_efi_bootmgr to use FsHelper   Simon Glass
• [PATCH v4 0/5] Provide a class for building filesystem images   Simon Glass
• [PATCH v4 1/5] test: fs_helper: Allow passing the image filename   Simon Glass
• [PATCH v4 2/5] test: fs_helper: Add a quiet flag to mk_fs()   Simon Glass
• [PATCH v4 3/5] test: Update comment for fs_helper.setup_image()   Simon Glass
• [PATCH v4 4/5] test: fs_helper: Drop the size_gran argument   Simon Glass
• [PATCH v4 5/5] test: Convert fs_helper to use a class   Simon Glass
• [PATCH v2] boot: Add fit_config_get_hash_list() to build signed node list   Simon Glass
• [PATCH v2] boot: Add fit_config_get_hash_list() to build signed node list   Simon Glass
• Synced invitation: U-Boot community meeting @ Every 2 weeks from 9am to 10am on Tuesday (MDT) (u-boot at lists.denx.de)   Simon Glass
• Synced invitation: U-Boot community meeting @ Every 2 weeks from 8am to 9am on Tuesday from Tue 10 Feb to Mon 9 Mar (MST) (u-boot at lists.denx.de)   Simon Glass
• Synced invitation: U-Boot community meeting @ Tue 24 Feb 2026 8am - 9am (MST) (u-boot at lists.denx.de)   Simon Glass
• Synced invitation: U-Boot community meeting @ Tue 10 Feb 2026 8am - 9am (MST) (u-boot at lists.denx.de)   Simon Glass
• [PATCH next] arm: mach-k3: use Kconfig options for ATF/OPTEE size   Dhruva Gole
• [PATCH 1/5] misc: fs_loader: fix ubifs not unmounted on dev_get_priv error   Daniel Golle
• [PATCH 1/5] misc: fs_loader: fix ubifs not unmounted on dev_get_priv error   Daniel Golle
• [PATCH] clk: mediatek: mt7622: fix infracfg and pericfg clock operations   Daniel Golle
• [PATCH] board: ti: j7*: Update rm-cfg and tifs-rm-cfg   Dominik Haller
• [PATCH] FIT: Address Secure Boot Bypass for Signed FIT Images   Sascha Hauer
• [PATCH] FIT: Address Secure Boot Bypass for Signed FIT Images   Sascha Hauer
• [PATCH] image-fit: Fix mismatched parameter type in comment   Kunihiko Hayashi
• [PATCH v1 0/5] Add support for Freebox Nodebox 10G (Armada 8040)   Vincent Jardin
• [PATCH v1 1/5] arm: mach-mvebu: armada8k: add CPU and clock info display   Vincent Jardin
• [PATCH v1 2/5] board: freebox: add Nodebox 10G board support   Vincent Jardin
• [PATCH v1 3/5] arm: dts: armada-8040-nbx: add U-Boot dtsi for conditional OP-TEE   Vincent Jardin
• [PATCH v1 4/5] cmd: mvebu: add emmcboot for Nodebox image format   Vincent Jardin
• [PATCH v1 5/5] cmd: mvebu: add device serial and MAC address initialization   Vincent Jardin
• [PATCH] net: lwip: Fix PBUF_POOL_BUFSIZE when PROT_TCP_LWIP is disabled   Jonas Karlman
• [PATCH v2 12/12] arch: arm: rockchip: Add initial support for RK3506   Jonas Karlman
• [PATCH] rockchip: rk3568: Include all addressable DRAM in memory map   Jonas Karlman
• [PATCH v2] net: lwip: Fix PBUF_POOL_BUFSIZE when PROT_TCP_LWIP is disabled   Jonas Karlman
• [PATCH] rockchip: rk3568: Include all addressable DRAM in memory map   Jonas Karlman
• [PATCH] net: lwip: scale buffer pool size with TFTP block size   Jonas Karlman
• [PATCH v2] rockchip: rk3588-rock-5b: Remove USB-C controller from u-boot.dtsi   Jonas Karlman
• [PATCH 2/2] board: rockchip: Add FriendlyElec NanoPi R76S   Jonas Karlman
• [PATCH v2 0/2] board: rockchip: Add FriendlyElec NanoPi R76S   Jonas Karlman
• [PATCH v2 1/2] arm64: dts: rockchip: Add devicetree for the FriendlyElec NanoPi R76S   Jonas Karlman
• [PATCH v2 2/2] board: rockchip: Add FriendlyElec NanoPi R76S   Jonas Karlman
• [PATCH v3 00/12] rockchip: Add initial support for RK3506   Jonas Karlman
• [PATCH v3 01/12] rockchip: spl: Add common handling of USB bootsource_id 0x81   Jonas Karlman
• [PATCH v3 02/12] rockchip: mkimage: Re-sort the spl_infos list alphanumerically   Jonas Karlman
• [PATCH v3 03/12] rockchip: mkimage: Add support for RK3506   Jonas Karlman
• [PATCH v3 04/12] ram: rockchip: Add basic support for RK3506   Jonas Karlman
• [PATCH v3 05/12] dt-bindings: clock: rockchip: Add RK3506 clock and reset unit   Jonas Karlman
• [PATCH v3 06/12] clk: rockchip: Add support for RK3506   Jonas Karlman
• [PATCH v3 07/12] pinctrl: rockchip: Use syscon_regmap_lookup_by_phandle()   Jonas Karlman
• [PATCH v3 08/12] pinctrl: rockchip: Add support for RK3506   Jonas Karlman
• [PATCH v3 09/12] rockchip: otp: Add support for RK3506   Jonas Karlman
• [PATCH v3 10/12] phy: rockchip-inno-usb2: Add support for RK3506   Jonas Karlman
• [PATCH v3 11/12] net: dwc_eth_qos_rockchip: Add support for RK3506   Jonas Karlman
• [PATCH v3 12/12] arch: arm: rockchip: Add initial support for RK3506   Jonas Karlman
• [PATCH] clk: rockchip: rk3528: Add CLK_REF_USB3OTG support   Jonas Karlman
• [PATCH] clk: rockchip: rk3576: Add CLK_REF_USB3OTGx support   Jonas Karlman
• [PATCH v3 00/12] rockchip: Add initial support for RK3506   Jonas Karlman
• [PATCH v5 0/4] Enable full UFS boot on Rockchip RK3576   Jonas Karlman
• [PATCH v5 2/4] reset: rockchip: make device resets available in SPL   Jonas Karlman
• [PATCH v5 4/4] rockchip: spl: Add support for booting from UFS   Jonas Karlman
• [PATCH v2 0/4] IO+DDR low power mode bugfixes for AM62P and AM62A   Akashdeep Kaur
• [PATCH v2 1/4] ram: ti: k3-ddrss: Add workaround sequence for errata i2487   Akashdeep Kaur
• [PATCH v2 2/4] mach-k3: am62xx-lpm: Add 32kHz LFOSC enable function declaration   Akashdeep Kaur
• [PATCH v2 3/4] mach-k3: am62px: Enable 32kHz LFOSC during LPM resume   Akashdeep Kaur
• [PATCH v2 4/4] mach-k3: am62ax: Enable 32kHz LFOSC during LPM resume   Akashdeep Kaur
• [PATCH] usb: gadget: Mark udc_disconnect as static   Mattijs Korpershoek
• [GIT PULL] Please pull u-boot-dfu-next-20260303 into next   Mattijs Korpershoek
• [PATCH] common: spl: spl_dfu.c: Fix warning associated with PCI subclass_code   Mattijs Korpershoek
• [v2 PATCH] mach-k3: Defer CTRL_MMR access until after TIFS version response   Kumar, Udit
• [PATCH v3 0/7] clk: mediatek: new mt8189 driver   David Lechner
• [PATCH v3 1/7] clk: mediatek: use correct struct type for infrasys clocks   David Lechner
• [PATCH v3 2/7] clk: mediatek: refactor parent rate lookup functions   David Lechner
• [PATCH v3 3/7] clk: mediatek: add mtk_clk_id_is_* helper functions   David Lechner
• [PATCH v3 4/7] clk: mediatek: add CLK_PARENT_EXT   David Lechner
• [PATCH v3 5/7] clk: mediatek: add MUX_MIXED_CLR_SET_UPD_FLAGS() macro   David Lechner
• [PATCH v3 6/7] dt-bindings: clock: Add MediaTek MT8189 clock   David Lechner
• [PATCH v3 7/7] clk: mediatek: add clock driver for MT8189   David Lechner
• [PATCH 00/14] clk: mediatek: unify mux clocks   David Lechner
• [PATCH 01/14] clk: mediatek: move common PARENT macros to header   David Lechner
• [PATCH 02/14] clk: mediatek: mt7622: convert to struct mtk_parent   David Lechner
• [PATCH 03/14] clk: mediatek: mt7981: convert to struct mtk_parent   David Lechner
• [PATCH 04/14] clk: mediatek: mt7987: convert to struct mtk_parent   David Lechner
• [PATCH 05/14] clk: mediatek: mt7988: convert to struct mtk_parent   David Lechner
• [PATCH 06/14] clk: mediatek: mt8183: convert to struct mtk_parent   David Lechner
• [PATCH 07/14] clk: mediatek: mt8188: convert to struct mtk_parent   David Lechner
• [PATCH 08/14] clk: mediatek: mt8195: convert to struct mtk_parent   David Lechner
• [PATCH 09/14] clk: mediatek: mt8365: convert to struct mtk_parent   David Lechner
• [PATCH 10/14] clk: mediatek: mt8512: convert to struct mtk_parent   David Lechner
• [PATCH 11/14] clk: mediatek: mt8516: convert to struct mtk_parent   David Lechner
• [PATCH 12/14] clk: mediatek: mt8518: convert to struct mtk_parent   David Lechner
• [PATCH 13/14] clk: mediatek: remove CLK_PARENT_MIXED flag   David Lechner
• [PATCH 14/14] clk: mediatek: refactor duplicate *_mux_get_rate()   David Lechner
• [PATCH v4 0/7] clk: mediatek: new mt8189 driver   David Lechner
• [PATCH v4 1/7] clk: mediatek: use correct struct type for infrasys clocks   David Lechner
• [PATCH v4 2/7] clk: mediatek: refactor parent rate lookup functions   David Lechner
• [PATCH v4 3/7] clk: mediatek: add mtk_clk_id_is_* helper functions   David Lechner
• [PATCH v4 4/7] clk: mediatek: add CLK_PARENT_EXT   David Lechner
• [PATCH v4 5/7] clk: mediatek: add MUX_MIXED_CLR_SET_UPD_FLAGS() macro   David Lechner
• [PATCH v4 6/7] dt-bindings: clock: Add MediaTek MT8189 clock   David Lechner
• [PATCH v4 7/7] clk: mediatek: add clock driver for MT8189   David Lechner
• [PATCH] clk: mediatek: mt8365: drop topckgen map   David Lechner
• [PATCH] clk: mediatek: mt7622: fix infracfg and pericfg clock operations   David Lechner
• [PATCH] clk: mediatek: mt8188: fix CLK_TOP_CLK26M rate   David Lechner
• [PATCH v2] clk: mediatek: mt8188: fix CLK_TOP_CLK{13,26}M rates   David Lechner
• [PATCH] doc/buildman: fix missing :: on examples   David Lechner
• [PATCH v2 0/9] clk: mediatek: clean up flags   David Lechner
• [PATCH v2 1/9] clk: mediatek: rename HAVE_RST_BAR   David Lechner
• [PATCH v2 2/9] clk: mediatek: rename CLK_DOMAIN_SCPSYS   David Lechner
• [PATCH v2 3/9] clk: mediatek: add MUX_GATE_MIXED macros   David Lechner
• [PATCH v2 4/9] clk: mediatek: move common PARENT macros to header   David Lechner
• [PATCH v2 5/9] clk: mediatek: mt7622: change to struct mtk_parent   David Lechner
• [PATCH v2 6/9] clk: mediatek: mt7623: change to struct mtk_parent   David Lechner
• [PATCH v2 7/9] clk: mediatek: mt7629: change to struct mtk_parent   David Lechner
• [PATCH v2 8/9] clk: mediatek: set CLK_PARENT_XTAL on fixed factor clocks   David Lechner
• [PATCH v2 9/9] clk: mediatek: remove use of CLK_BYPASS_XTAL flag   David Lechner
• [PATCH] doc/buildman: fix missing :: on examples   David Lechner
• [PATCH v2 00/13] clk: mediatek: unify mux clocks   David Lechner
• [PATCH v2 01/13] clk: mediatek: mt7622: convert to struct mtk_parent   David Lechner
• [PATCH v2 02/13] clk: mediatek: mt7981: convert to struct mtk_parent   David Lechner
• [PATCH v2 03/13] clk: mediatek: mt7987: convert to struct mtk_parent   David Lechner
• [PATCH v2 04/13] clk: mediatek: mt7988: convert to struct mtk_parent   David Lechner
• [PATCH v2 05/13] clk: mediatek: mt8183: convert to struct mtk_parent   David Lechner
• [PATCH v2 06/13] clk: mediatek: mt8188: convert to struct mtk_parent   David Lechner
• [PATCH v2 07/13] clk: mediatek: mt8195: convert to struct mtk_parent   David Lechner
• [PATCH v2 08/13] clk: mediatek: mt8365: convert to struct mtk_parent   David Lechner
• [PATCH v2 09/13] clk: mediatek: mt8512: convert to struct mtk_parent   David Lechner
• [PATCH v2 10/13] clk: mediatek: mt8516: convert to struct mtk_parent   David Lechner
• [PATCH v2 11/13] clk: mediatek: mt8518: convert to struct mtk_parent   David Lechner
• [PATCH v2 12/13] clk: mediatek: remove CLK_PARENT_MIXED flag   David Lechner
• [PATCH v2 13/13] clk: mediatek: refactor duplicate *_mux_get_rate()   David Lechner
• [PATCH 0/2] clk: mediatek: avoid more "extra" topckgen clocks   David Lechner
• [PATCH 1/2] clk: mediatek: mt8188: use ext_clock_rates   David Lechner
• [PATCH 2/2] clk: mediatek: mt8195: use ext_clock_rates   David Lechner
• [PATCH 00/16] clk: mediatek: remove CLK_XTAL/CLK_PARENT_XTAL   David Lechner
• [PATCH 01/16] clk: mediatek: replace xtal2_rate with struct mtk_parent   David Lechner
• [PATCH 02/16] clk: mediatek: mt7622: convert CLK_XTAL to CLK_PAD_CLK25M   David Lechner
• [PATCH 03/16] clk: mediatek: mt7623: convert CLK_XTAL to CLK_PAD_CLK26M   David Lechner
• [PATCH 04/16] clk: mediatek: mt7629: convert CLK_XTAL to CLK_PAD_CLK40M   David Lechner
• [PATCH 05/16] clk: mediatek: mt7981: convert CLK_XTAL to CLK_PAD_CLK40M   David Lechner
• [PATCH 06/16] clk: mediatek: mt7986: convert CLK_XTAL to CLK_PAD_CLK40M   David Lechner
• [PATCH 07/16] clk: mediatek: mt7987: convert CLK_XTAL to CLK_PAD_CLK40M   David Lechner
• [PATCH 08/16] clk: mediatek: mt7988: convert CLK_XTAL to CLK_PAD_CLK40M   David Lechner
• [PATCH 09/16] clk: mediatek: mt8183: convert CLK_XTAL to CLK_PAD_CLK26M   David Lechner
• [PATCH 10/16] clk: mediatek: mt8188: convert CLK_XTAL to CLK_PAD_CLK26M   David Lechner
• [PATCH 11/16] clk: mediatek: mt8195: convert CLK_XTAL to CLK_PAD_CLK26M   David Lechner
• [PATCH 12/16] clk: mediatek: mt8365: convert CLK_XTAL to CLK_PAD_CLK26M   David Lechner
• [PATCH 13/16] clk: mediatek: mt8512: convert CLK_XTAL to CLK_PAD_CLK26M   David Lechner
• [PATCH 14/16] clk: mediatek: mt8516: convert CLK_XTAL to CLK_PAD_CLK26M   David Lechner
• [PATCH 15/16] clk: mediatek: mt8518: convert CLK_XTAL to CLK_PAD_CLK26M   David Lechner
• [PATCH 16/16] clk: mediatek: remove CLK_PARENT_XTAL   David Lechner
• [PATCH v2 0/2] Add MediaTek MT8395_EVK board   David Lechner
• [PATCH v2 0/6] boards: mediatek: initial support for Genio 720 EVK   David Lechner
• [PATCH v2 1/6] clk: mediatek: mt8189: add some VLP clocks   David Lechner
• [PATCH v2 2/6] arm: mediatek: add support of MT8189 SoC family   David Lechner
• [PATCH v2 3/6] arm: dts: mediatek: mt8189: Add pinmux macro header file   David Lechner
• [PATCH v2 4/6] arm: dts: mediatek: Add MediaTek MT8189 dtsi file   David Lechner
• [PATCH v2 5/6] arm: dts: mediatek: Add MediaTek Genio 520/720 EVK DTS   David Lechner
• [PATCH v2 6/6] board: mediatek: Add Genio 520/720 EVK defconfigs   David Lechner
• [PATCH] MAINTAINERS: add new MediaTek custodians   David Lechner
• [PATCH 0/3] pinctrl: mediatek: support for mt8189   David Lechner
• [GIT PULL] Please pull mediatek-for-next-2026-03-11   David Lechner
• [PATCH v2] scsi: Adjust SCSI inquiry command data length   Macpaul Lin
• [PATCH v2 0/2] phy: add common PHY polarity properties support   Lucien.Jheng
• [PATCH v2 1/2] phy: add common PHY properties support   Lucien.Jheng
• [PATCH v2 2/2] net: phy: air_en8811h: use standard rx-polarity/tx-polarity properties   Lucien.Jheng
• [PATCH v2 1/2] phy: add common PHY properties support   Lucien.Jheng
• [PATCH v2 2/2] net: phy: air_en8811h: use standard rx-polarity/tx-polarity properties   Lucien.Jheng
• [PATCH 0/2] MAINTAINERS: Update ADI ADSP platform maintainers   Greg Malysa
• [PATCH v3] arm: dts: sc594: Update sc594 EZKIT GPIO polarities   Greg Malysa
• [PATCH] configs: socfpga: arria10: Disable CONFIG_USE_TINY_PRINTF   Maniyam, Dinesh
• [PATCH v2 00/16] Add board support for Spacemit K1 SoC in SPL   Raymond Mao
• [PATCH 0/5] misc: fs_loader: reorg and split to FS and FW loader + FIP loader   Christian Marangi
• [PATCH 1/5] misc: fs_loader: fix ubifs not unmounted on dev_get_priv error   Christian Marangi
• [PATCH 2/5] misc: fs_loader: reorganize and split to FS and FW loader   Christian Marangi
• [PATCH 3/5] misc: fw_loader: implement generic get_fw_loader_from_node()   Christian Marangi
• [PATCH 4/5] misc: fw_loader: introduce FIP loader driver   Christian Marangi
• [PATCH 5/5] misc: fw_loader: implement request_firmware_size() OP   Christian Marangi
• [PATCH 1/5] misc: fs_loader: fix ubifs not unmounted on dev_get_priv error   Christian Marangi
• [PATCH v2 0/5] misc: fs_loader: reorg and split to FS and FW loader + FIP loader   Christian Marangi
• [PATCH v2 1/5] misc: fs_loader: fix ubifs not unmounted on dev_get_priv error   Christian Marangi
• [PATCH v2 2/5] misc: fs_loader: reorganize and split to FS and FW loader   Christian Marangi
• [PATCH v2 3/5] misc: fw_loader: implement generic get_fw_loader_from_node()   Christian Marangi
• [PATCH v2 4/5] misc: fw_loader: introduce FIP loader driver   Christian Marangi
• [PATCH v2 5/5] misc: fw_loader: implement request_firmware_size() OP   Christian Marangi
• [PATCH 0/4] Minor i.MX DDR init clean-up   Philip Molloy
• [PATCH 1/4] ddr: imx: Remove duplicate includes   Philip Molloy
• [PATCH 2/4] ddr: imx: Remove undefined declarations   Philip Molloy
• [PATCH 3/4] ddr: imx: Remove unused macros   Philip Molloy
• [PATCH 4/4] ddr: imx: Remove unnecessary macro argument   Philip Molloy
• [PATCH v1] spi: designware: add support for bits-per-word DT binding   Ng, Boon Khai
• [PATCH v1] spi: designware: add support for bits-per-word DT binding   Ng, Boon Khai
• [PATCH v1] spi: designware: add support for bits-per-word DT binding   Ng, Boon Khai
• [PATCH v1] arm: dts: agilex5: Set DTB filename and kernel node removal for non-secure boot   Boon Khai Ng
• [PATCH v1] include: configs: socfpga: Add environment variables for distro boot   Boon Khai Ng
• [PATCH v1] spi: designware: add support for bits-per-word DT binding   Ng, Boon Khai
• [PATCH] configs: socfpga: arria10: Disable CONFIG_USE_TINY_PRINTF   Dinh Nguyen
• [PATCH] mtd: spi-nor: Add gd25lx128j chip   Flaviu Nistor
• [PATCH v2] mtd: spi-nor: Add gd25lx128j chip   Flaviu Nistor
• [PATCH] FIT: Address Secure Boot Bypass for Signed FIT Images   Nussel, Ludwig
• [PATCH v2] boot: Add fit_config_get_hash_list() to build signed node list   Nussel, Ludwig
• [PATCH v2] boot: Add fit_config_get_hash_list() to build signed node list   Nussel, Ludwig
• [PATCH 1/2] Add back debug output of hashed nodes   Ludwig Nussel
• [PATCH 2/2] Remove confusing NULL from error message   Ludwig Nussel
• [PATCH v2 2/2] net: phy: air_en8811h: use standard rx-polarity/tx-polarity properties   Vladimir Oltean
• [PATCH v2 1/2] phy: add common PHY properties support   Vladimir Oltean
• [PATCH v2 1/2] phy: add common PHY properties support   Vladimir Oltean
• [PATCH] serial: goldfish: Add DEBUG_UART support   Daniel Palmer
• [PATCH] serial: goldfish: Add DEBUG_UART support   Daniel Palmer
• [PATCH v2 1/3] serial: goldfish: Add debug uart support   Daniel Palmer
• [PATCH v2 2/3] m68k: m680x0: Initialise the debug uart   Daniel Palmer
• [PATCH v2 3/3] doc: board: virt: m68k: Detail how to use debug uart   Daniel Palmer
• [RFC PATCH 0/3] Add virtio-mmio support to m68k virt machine   Daniel Palmer
• [RFC PATCH 1/3] virtio: mmio: Allow instantiation via platform data   Daniel Palmer
• [RFC PATCH 2/3] virtio: mmio: endian *fixes* *HACK*   Daniel Palmer
• [RFC PATCH 3/3] board: qemu: m68k: Create virtio mmio instances   Daniel Palmer
• [PATCH] fs: fat: Refactor dirty flag handling   Daniel Palmer
• [PATCH] m68k: Add LTO support   Daniel Palmer
• [PATCH v2] pinctrl: bcm283x: Fix GPIO pull state register values for BCM2711   Cibil Pankiras
• [PATCH v2 0/2] virtio: rng: Handle oversized return buffers   Meet Patel
• [PATCH v2 1/2] test: dm: virtio_rng: Update virtio-rng test   Meet Patel
• [PATCH v2 2/2] virtio: rng: Handle oversized return buffers   Meet Patel
• bootstd EFI bootmeth: network bootflow downloads EFI app but never becomes valid (err ‑22/‑114) on qemu_arm64   Ryan Persée
• [PATCH 0/9] ARM: RPi5: Enable PCIe   Andrea della Porta
• [PATCH 1/2] test: dm: virtio_rng: Update virtio-rng test   Andre Przywara
• [PATCH 2/2] virtio: rng: Handle oversized return buffers   Andre Przywara
• [QUESTION] CM5 / BCM2712: RP1 UART console support in U-Boot   Chris Punt
• [PATCH] board: rockchip: Add Xunlong Orange Pi 5 Pro board support   Tom Rini
• [PATCH 1/1] net: do not use non-existent CONFIG_DM_CLK   Tom Rini
• [PATCH v2 1/7] test: fs_helper: Allow passing the image filename   Tom Rini
• [PATCH v2 2/7] test: fs_helper: Add a quiet flag to mk_fs()   Tom Rini
• [PATCH v2 3/7] test: Update comment for fs_helper.setup_image()   Tom Rini
• [PATCH v2 5/7] test: Convert fs_helper to use a class   Tom Rini
• [PATCH v2 6/7] test: Add a helper class to create disk images   Tom Rini
• [PATCH v3 07/17] bootm: Stash bootstage data in bootm_final()   Tom Rini
• [PATCH v3 04/17] bootm: Create bootm_final() for pre-boot cleanup   Tom Rini
• [PATCH] FIT: Address Secure Boot Bypass for Signed FIT Images   Tom Rini
• [GIT PULL] Please pull u-boot-imx-next-20260228   Tom Rini
• Pull request efi-2026-04-rc4   Tom Rini
• [PATCH v1] common/memsize.c: Fix get_ram_size() original data restore   Tom Rini
• FIT Verification   Tom Rini
• [PATCH v1] spi: designware: add support for bits-per-word DT binding   Tom Rini
• Binman and blobs   Tom Rini
• [PATCH] FIT: Address Secure Boot Bypass for Signed FIT Images   Tom Rini
• [PATCH] FIT: Address Secure Boot Bypass for Signed FIT Images   Tom Rini
• [PATCH v1] spi: designware: add support for bits-per-word DT binding   Tom Rini
• [PATCH v2] dm: core: Don't allow ofnode_to_fdt() to return NULL   Tom Rini
• [PATCH] drivers: cpu: fix syntax error in Kconfig documentation   Tom Rini
• [PATCH] menu: Move shortcut-key handling to bootmenu_loop()   Tom Rini
• [PATCH] kbuild: unexport sub_make_done to fix child make invocations   Tom Rini
• [PATCH] kbuild: Drop phandle from diff between base DT and U-Boot augmented DT if DEVICE_TREE_DEBUG=1   Tom Rini
• [PATCH v1] spi: designware: add support for bits-per-word DT binding   Tom Rini
• [PATCH 1/2] mtd: nand: raw: Kconfig: clean up SPL Cadence NAND dependencies   Tom Rini
• [PATCH] FIT: Address Secure Boot Bypass for Signed FIT Images   Tom Rini
• [PATCH] kbuild: unexport sub_make_done to fix child make invocations   Tom Rini
• [PATCH] kbuild: unexport sub_make_done to fix child make invocations   Tom Rini
• [PATCH] kbuild: unexport sub_make_done to fix child make invocations   Tom Rini
• [PATCH] clk: mediatek: mt8188: fix CLK_TOP_CLK26M rate   Tom Rini
• [PATCH] kbuild: unexport sub_make_done to fix child make invocations   Tom Rini
• [PATCH v5 00/10] Add PCIe Boot support for TI J784S4 SoC   Tom Rini
• [GIT PULL] Please pull u-boot-ufs-20260304   Tom Rini
• [PATCH v2] tools/atmelimage: add const qualifier to fix compiler warning   Tom Rini
• [PATCH 0/2] MAINTAINERS: Update ADI ADSP platform maintainers   Tom Rini
• [PATCH v5 00/10] Add PCIe Boot support for TI J784S4 SoC   Tom Rini
• [PATCH v3 11/13] arm64: dts: freescale: Add i.MX952 EVK basic device tree   Tom Rini
• [PATCH] FIT: Address Secure Boot Bypass for Signed FIT Images   Tom Rini
• [PATCH] boot: Add fit_config_get_hash_list() to build signed node list   Tom Rini
• [PATCH] boot: Add fit_config_get_hash_list() to build signed node list   Tom Rini
• [PATCH v4 00/10] arm: am335x: Switch to upstream devicetree   Tom Rini
• [PATCH v2] boot: Add fit_config_get_hash_list() to build signed node list   Tom Rini
• [PATCH v4 04/17] bootm: Create bootm_final() for pre-boot cleanup   Tom Rini
• [PATCH v4 06/17] riscv: Call bootm_final()   Tom Rini
• [PATCH v4 08/17] arm: Call bootm_final()   Tom Rini
• [GIT PULL] Please pull u-boot-dfu-next-20260303 into next   Tom Rini
• [PULL] u-boot-usb/master   Tom Rini
• [PATCH v3 1/7] test: fs_helper: Allow passing the image filename   Tom Rini
• [PATCH v3 5/7] test: Convert fs_helper to use a class   Tom Rini
• [PATCH v3 6/7] test: Add a helper class to create disk images   Tom Rini
• [PATCH] Add an initial CONTRIBUTE.rst   Tom Rini
• [PATCH] video: stm32: dsi: add .of_to_plat callback   Tom Rini
• [PATCH 0/6] fw_env: cleanup flash_write_buf()   Tom Rini
• [PATCH] bootm: fix booting kernel_noload image   Tom Rini
• [PATCH v3] test: boot: Add test for bootmeth_rauc   Tom Rini
• [PATCH v4 1/5] test: fs_helper: Allow passing the image filename   Tom Rini
• [PATCH v4 5/5] test: Convert fs_helper to use a class   Tom Rini
• [PATCH v4 0/5] Provide a class for building filesystem images   Tom Rini
• [PATCH] video: stm32: dsi: add .of_to_plat callback   Tom Rini
• [PATCH] MAINTAINERS: update SPI NOR reviewer   Tom Rini
• [PATCH 0/6] 64-bit PCIe for AM64, AM69, J7200, J722S and J784S4   Tom Rini
• [PATCH v2] boot: Add fit_config_get_hash_list() to build signed node list   Tom Rini
• [PATCH] doc: Use sys.path.append for pytests being found   Tom Rini
• [ANN] U-Boot v2026.04-rc4 released   Tom Rini
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
• Fwd: New Defects reported by Coverity Scan for Das U-Boot   Tom Rini
• [PATCH] configs: j722s_evm_a53_defconfig: Allow configurability of MMCSD speeds   Tom Rini
• [PATCH v2] virtio: Fix virtio initialization sequence   Tom Rini
• [PATCH next] arm: mach-k3: use Kconfig options for ATF/OPTEE size   Tom Rini
• [PATCH] Makefile: fix duplicate dtbs recipe   Tom Rini
• [PATCH] arch: arm: dts: k3-r5: Drop a53_0 clock overrides in board files   Tom Rini
• Pull request: u-boot-rockchip-20260309   Tom Rini
• [PATCH v2 1/3] serial: goldfish: Add debug uart support   Tom Rini
• [PATCH] fw_loader: Introduce SUPPORTS_FW_LOADER symbol   Tom Rini
• [PATCH] net: Move network PHY under NETDEVICES   Tom Rini
• [PATCH] FIT: Image pre-load signature support must select not depends on FIT_SIGNATURE   Tom Rini
• [PATCH] dfu: Make the DFU_WRITE_ALT symbol available outside of DFU   Tom Rini
• [PATCH] sandbox: Only select DM_GPIO if GPIO   Tom Rini
• [PATCH 0/2] Update AM62AX and J722S CPSW PKTDMA Resource Sharing   Tom Rini
• [PATCH v6 1/2] fs: fat: Handle 'FAT sector size mismatch'   Tom Rini
• [PATCH 1/1] arm: don't select non-existent CONFIG_DM_PCI   Tom Rini
• [PATCH 1/1] arm/mach-sc5xx: don't select non-existent GIC_600_CLEAR_RDPD   Tom Rini
• [PATCH 1/1] dma: ti: don't use non-existent CONFIG_TI_K3_NAVSS_PSILCFG   Tom Rini
• [PATCH 1/1] boot: don't select non-existent CONFIG_VPL_CRYPTO   Tom Rini
• [PATCH 1/1] sandbox: don't imply non-existent CONFIG_KEYBOARD   Tom Rini
• [PATCH 1/1] disk: fix DOS_PARTITION dependencies   Tom Rini
• [PATCH 1/1] scripts: add checkkconfigsymbols.py   Tom Rini
• [PATCH v2] arm: k3: Kconfig: Enable fTPM and RPMB support   Tom Rini
• [PATCH] MAINTAINERS: add new MediaTek custodians   Tom Rini
• [PATCH] Add an initial CONTRIBUTE.rst   Peter Robinson
• [PATCH v6 07/12] video: rockchip: vop2: Add video bridge support   Peter Robinson
• [hack] help U-Boot find the correct PCIe inbound offset for NVMe on Raspberry Pi 5   Peter Robinson
• [QUESTION] CM5 / BCM2712: RP1 UART console support in U-Boot   Peter Robinson
• [PATCH v1 1/1] power: pmic: enable sysreset function with device tree property   Svyatoslav Ryhel
• [PATCH v1 1/1] power: pmic: enable sysreset function with device tree property   Svyatoslav Ryhel
• [PATCH v1 1/1] led: led_pwm: fix active-low behavior   Svyatoslav Ryhel
• [PATCH v1 1/1] led: led_pwm: fix active-low behavior   Svyatoslav Ryhel
• Fix x86 baytrail boot flow, UPD/VPD Updates   Eric Schikschneit
• [PATCH v4 00/10] arm: am335x: Switch to upstream devicetree   Markus Schneider-Pargmann
• [PATCH] kbuild: fix cross_tools compilation   Frieder Schrempf
• [PATCH v4 3/3] doc: board: starfive: Add Xunlong OrangePi RV   Heinrich Schuchardt
• [PATCH v4 1/3] board: starfive: visionfive2: Add Orange Pi RV selection by product_id   Heinrich Schuchardt
• [PATCH v4 2/3] configs: starfive: Add Orange Pi RV to visionfive2   Heinrich Schuchardt
• [PATCH 1/4] lib: uuid: add EBBR 2.1 conformance profile GUID   Heinrich Schuchardt
• [PATCH 3/4] cmd: efidebug: add ecpt command   Heinrich Schuchardt
• [PATCH 2/4] efi_loader: export efi_ecpt_guid   Heinrich Schuchardt
• [PATCH 4/4] test/py: add ECPT tests   Heinrich Schuchardt
• [PATCH] doc/buildman: fix missing :: on examples   Heinrich Schuchardt
• [PATCH v2 1/4] lib: uuid: add EBBR 2.1 conformance profile GUID   Heinrich Schuchardt
• [PATCH v2 2/4] efi_loader: export efi_ecpt_guid   Heinrich Schuchardt
• [PATCH v2 3/4] cmd: efidebug: add ecpt command   Heinrich Schuchardt
• [PATCH v9] efi_vars: Implement SPI Flash store   Heinrich Schuchardt
• [PATCH 1/1] efi_loader: avoid buffer overrun in efi_var_restore()   Heinrich Schuchardt
• [PATCH v1 1/1] rsa: fix incorrect positive EINVAL in padding_pss_verify()   Quentin Schulz
• [PATCH v1 1/1] led: led_pwm: fix active-low behavior   Quentin Schulz
• [PATCH v1 1/1] power: pmic: enable sysreset function with device tree property   Quentin Schulz
• [PATCH v1 1/1] power: pmic: enable sysreset function with device tree property   Quentin Schulz
• [PATCH v1 1/1] led: led_pwm: fix active-low behavior   Quentin Schulz
• [PATCH 0/2] update MAINTAINERS for PWM LED   Quentin Schulz
• [PATCH 1/2] MAINTAINERS: rename LED into PWM LED   Quentin Schulz
• [PATCH 2/2] MAINTAINERS: make PWM LED orphan   Quentin Schulz
• [RFC PATCH 02/16] binman: test: Move U-Boot variant test files to test/xpl/   Quentin Schulz
• [RFC PATCH 03/16] binman: test: Move x86 and Intel test files to test/x86/   Quentin Schulz
• [RFC PATCH 04/16] binman: test: Move FIT image test files to test/fit/   Quentin Schulz
• [RFC PATCH 05/16] binman: test: Move FDT/fdtmap test files to test/fdt/   Quentin Schulz
• [RFC PATCH 06/16] binman: test: Move blob test files to test/blob/   Quentin Schulz
• [RFC PATCH 07/16] binman: test: Move security test files to test/security/   Quentin Schulz
• [RFC PATCH 08/16] binman: test: Move CBFS test files to test/cbfs/   Quentin Schulz
• [RFC PATCH 09/16] binman: test: Move ChromeOS test files to test/cros/   Quentin Schulz
• [RFC PATCH 10/16] binman: test: Move mkimage test files to test/mkimage/   Quentin Schulz
• [RFC PATCH 11/16] binman: test: Move FIP/TF-A test files to test/fip/   Quentin Schulz
• [RFC PATCH 12/16] binman: test: Move UEFI capsule test files to test/capsule/   Quentin Schulz
• [RFC PATCH 13/16] binman: test: Move vendor-specific test files to test/vendor/   Quentin Schulz
• [RFC PATCH 14/16] binman: test: Move symbol test files to test/symbols/   Quentin Schulz
• [RFC PATCH 15/16] binman: test: Move remaining test files to test/entry/   Quentin Schulz
• [RFC PATCH 16/16] binman: doc: Update binman_tests.rst for subdirectory layout   Quentin Schulz
• [RFC PATCH 00/16] binman: test: Organise test files into subdirectories   Quentin Schulz
• Binman and blobs   Quentin Schulz
• [PATCH] FIT: Address Secure Boot Bypass for Signed FIT Images   Quentin Schulz
• [PATCH] image-fit: Fix mismatched parameter type in comment   Quentin Schulz
• [PATCH] Add an initial CONTRIBUTE.rst   Quentin Schulz
• [PATCH] FIT: Address Secure Boot Bypass for Signed FIT Images   Quentin Schulz
• [PATCH 1/3] cmd: test: allow using [ as alias for test   Quentin Schulz
• [PATCH v4 11/17] mips: Call bootm_final()   Daniel Schwierzeck
• [PATCH v6 5/7] mips: loongson: add clk driver   Daniel Schwierzeck
• [PATCH v6 1/7] mips: loongson: minimal initial SoC support   Daniel Schwierzeck
• [PATCH v6 2/7] mips: loongson: lowlevel initialize   Daniel Schwierzeck
• [PATCH v6 3/7] mips: loongson: lowlevel debug serial   Daniel Schwierzeck
• [PATCH v6 4/7] mips: loongson: ls1c300 board support   Daniel Schwierzeck
• [PATCH v6 6/7] mips: loongson: add watchdog driver   Daniel Schwierzeck
• [PATCH v6 7/7] mips: loongson: ls1c300 dts and bindings   Daniel Schwierzeck
• [PATCH v1 1/1] led: led_pwm: fix active-low behavior   Jonas Schwöbel
• [PATCH v4 0/3] Add upstream board Xunlong Orange Pi RV   E Shattow
• [PATCH v4 1/3] board: starfive: visionfive2: Add Orange Pi RV selection by product_id   E Shattow
• [PATCH v4 2/3] configs: starfive: Add Orange Pi RV to visionfive2   E Shattow
• [PATCH v4 3/3] doc: board: starfive: Add Xunlong OrangePi RV   E Shattow
• [PATCH v4 0/3] Add upstream board Xunlong Orange Pi RV   E Shattow
• [RESEND PATCH v4 0/3] Add upstream board Xunlong Orange Pi RV   E Shattow
• [RESEND PATCH v4 1/3] board: starfive: visionfive2: Add Orange Pi RV selection by product_id   E Shattow
• [RESEND PATCH v4 2/3] configs: starfive: Add Orange Pi RV to visionfive2   E Shattow
• [RESEND PATCH v4 3/3] doc: board: starfive: Add Xunlong OrangePi RV   E Shattow
• [PATCH] doc: board: starfive: jh7110 common give build output dir by env not arg   E Shattow
• [PATCH] doc: board: starfive: jh7110 common give build output dir by env not arg   E Shattow
• [PATCH] doc: board: starfive: jh7110 common update OPENSBI build env reference   E Shattow
• [PATCH] doc: board: starfive: jh7110 common give build output dir by env not arg   E Shattow
• [PATCH 0/3] net: zynq_gem: driver enhancement   Michal Simek
• [PATCH 1/3] net: zynq_gem: Disable broadcast packets   Michal Simek
• [PATCH 2/3] net: zynq_gem: clear TXSR transfer complete   Michal Simek
• [PATCH 3/3] net: zynq_gem: Add support for dma-coherent flag   Michal Simek
• [PATCH] arm64: versal2: Enable GIC600 support   Michal Simek
• [PATCH v2] spi: cadence_qspi: pulse controller reset at probe   Michal Simek
• [PATCH] arm64: versal2: Fix UFS boot command sequence   Michal Simek
• [PATCH 0/3] net: zynq_gem: driver enhancement   Michal Simek
• [PATCH] efi_loader: Allow disabling ANSI console queries via env variable   Michal Simek
• [PATCH 0/2] fwu: Call EFI stack initialization after preboot   Michal Simek
• [PATCH 1/2] event: Introduce EVT_POST_PREBOOT event   Michal Simek
• [PATCH 2/2] fwu: Move boottime checks to EVT_POST_PREBOOT   Michal Simek
• [PATCH v9] efi_vars: Implement SPI Flash store   Michal Simek
• [PATCH v5 00/08] riscv: Add support for P8700 platform on Boston board   Uros Stajic
• [PATCH 0/4] Add an efidebug ecpt command   Vincent Stehlé
• [PATCH 1/4] lib: uuid: add EBBR 2.1 conformance profile GUID   Vincent Stehlé
• [PATCH 2/4] efi_loader: export efi_ecpt_guid   Vincent Stehlé
• [PATCH 3/4] cmd: efidebug: add ecpt command   Vincent Stehlé
• [PATCH 4/4] test/py: add ECPT tests   Vincent Stehlé
• [PATCH 1/4] lib: uuid: add EBBR 2.1 conformance profile GUID   Vincent Stehlé
• [PATCH 3/4] cmd: efidebug: add ecpt command   Vincent Stehlé
• [PATCH v2 1/4] lib: uuid: add EBBR 2.1 conformance profile GUID   Vincent Stehlé
• [PATCH v2 2/4] efi_loader: export efi_ecpt_guid   Vincent Stehlé
• [PATCH v2 3/4] cmd: efidebug: add ecpt command   Vincent Stehlé
• [PATCH v2 4/4] test/py: add ECPT tests   Vincent Stehlé
• [PATCH v2 2/4] efi_loader: export efi_ecpt_guid   Vincent Stehlé
• [PATCH 1/5] efi_selftest: fix buffer overflow   Vincent Stehlé
• [PATCH v3 0/3] drivers: ufs: ufs_hba_ops callbacks cleanup   Julien Stephan
• [PATCH v3 1/3] drivers: ufs: handle return values of ufs_hba_ops callbacks   Julien Stephan
• [PATCH v3 2/3] drivers: ufs: add helper for phy_initialization callback   Julien Stephan
• [PATCH v3 3/3] drivers: ufs: fix typo in struct ufs_dev_cmd kernel-doc   Julien Stephan
• [PATCH v2 2/3] drivers: ufs: add helper for phy_initialization callback   Julien Stephan
• [PATCH 0/2] fastboot: Add UFS flash/erase support   Ruitong Su
• [PATCH 1/2] fastboot: Add UFS flash backend   Ruitong Su
• [PATCH 2/2] fastboot: Wire UFS backend into command and getvar dispatch   Ruitong Su
• [PATCH] fdt: Prefer %pap over %llx   A. Sverdlin
• [PATCH] net: lwip: scale buffer pool size with TFTP block size   Pranav Tilak
• [PATCH v2] net: lwip: scale buffer pool size with TFTP block size   Pranav Tilak
• [PATCH 4/5] board: nxp: imx9{4,5}_evk: Add qb save option in SPL   Simona Toaca
• [PATCH 4/5] board: nxp: imx9{4,5}_evk: Add qb save option in SPL   Simona Toaca
• [PATCH 4/5] board: nxp: imx9{4,5}_evk: Add qb save option in SPL   Simona Toaca
• [PATCH 1/4] mtd: rawnand: sunxi: Replace hard coded value by a define   Michael Nazzareno Trimarchi
• [PATCH] usb: cdns3: fix cdns3_bind() to avoid returning error and probe parent   Siddharth Vadapalli
• [PATCH] usb: cdns3: fix cdns3_bind() to avoid returning error and probe parent   Siddharth Vadapalli
• [PATCH] usb: cdns3: fix cdns3_bind() to avoid returning error and probe parent   Siddharth Vadapalli
• [PATCH v5 00/10] Add PCIe Boot support for TI J784S4 SoC   Siddharth Vadapalli
• [PATCH] common: spl: spl_dfu.c: Fix warning associated with PCI subclass_code   Siddharth Vadapalli
• [PATCH v5 00/10] Add PCIe Boot support for TI J784S4 SoC   Siddharth Vadapalli
• [PATCH] common: spl: spl_dfu.c: Fix warning associated with PCI subclass_code   Siddharth Vadapalli
• [PATCH 0/2] Update AM62AX and J722S CPSW PKTDMA Resource Sharing   Siddharth Vadapalli
• [PATCH] usb: cdns3: fix cdns3_bind() to avoid returning error and probe parent   Marek Vasut
• [PATCH v3 1/4] iopoll: Fix read_poll_timeout macro documentation   Marek Vasut
• [PATCH v3 2/4] iopoll: Improve handling of timeout_us param in read_poll_timeout macro   Marek Vasut
• [PATCH v3 3/4] usb: Add code spacing in usb_bulk_msg function   Marek Vasut
• [PATCH v3 4/4] usb: Convert ad-hoc poll/timeout sequences in usb.c to iopoll   Marek Vasut
• [PATCH v3 2/4] iopoll: Improve handling of timeout_us param in read_poll_timeout macro   Marek Vasut
• [PATCH] usb: cdns3: fix cdns3_bind() to avoid returning error and probe parent   Marek Vasut
• [PATCH] scsi: Adjust SCSI inquiry command data length   Marek Vasut
• [PATCH v4 1/4] iopoll: Fix read_poll_timeout macro documentation   Marek Vasut
• [PATCH v4 2/4] iopoll: Improve handling of timeout_us param in read_poll_timeout macro   Marek Vasut
• [PATCH v4 3/4] usb: Add code spacing in usb_bulk_msg function   Marek Vasut
• [PATCH v4 4/4] usb: Convert ad-hoc poll/timeout sequences in usb.c to iopoll   Marek Vasut
• [PATCH v2] scsi: Adjust SCSI inquiry command data length   Marek Vasut
• [PULL] u-boot-usb/master   Marek Vasut
• [PATCH 0/5] imx9{4,5}: Add Quickboot support   Marek Vasut
• [PATCH] rtc: rv3028: fix PORF flag not being cleared   Javier Viguera
• [PATCH] FIT: Address Secure Boot Bypass for Signed FIT Images   Rasmus Villemoes
• command negation in modern hush parser   Rasmus Villemoes
• [PATCH 0/3] add [ as alias for test, fix 0/1 argument handling   Rasmus Villemoes
• [PATCH 1/3] cmd: test: allow using [ as alias for test   Rasmus Villemoes
• [PATCH 2/3] test: add tests for left-bracket alias for 'test' command   Rasmus Villemoes
• [PATCH 3/3] cmd: test: fix handling of single-argument form of test   Rasmus Villemoes
• [PATCH 1/3] cmd: test: allow using [ as alias for test   Rasmus Villemoes
• [PATCH] net: lwip: scale buffer pool size with TFTP block size   Vinay Tilak, Pranav
• [PATCH] net: lwip: scale buffer pool size with TFTP block size   Vinay Tilak, Pranav
• [PATCH 1/1] board/BuR/zynq: don't select non-existent SPL_BINMAN_FDT   Wolfgang Wallner
• [PATCH 0/7] Qualcomm Milos SoC bringup   Luca Weiss
• [PATCH 1/7] drivers: pinctrl: Add Qualcomm Milos TLMM driver   Luca Weiss
• [PATCH 2/7] clk/qcom: Add Milos clock driver   Luca Weiss
• [PATCH 3/7] phy: qcom: Add Milos to QMP UFS PHY driver   Luca Weiss
• [PATCH 4/7] regulator: qcom-rpmh-regulator: add support for PM7550 regulators   Luca Weiss
• [PATCH 5/7] gpio: qcom: Support GPIOs on PM7550 PMIC   Luca Weiss
• [PATCH 6/7] qcom_defconfig: Enable Milos clock driver   Luca Weiss
• [PATCH 7/7] board/qualcomm: add debug config fragment for Milos   Luca Weiss
• [PATCH 1/1] net: do not use non-existent CONFIG_DM_CLK   Yang Xiwen
• [PATCH] doc: spacemit: add K1 SPL build and test guide   Guodong Xu
• [PATCH RFC] rockchip: rk3588: include all addressable DRAM in memory map   Kever Yang
• [PATCH v2] phy: rockchip: naneng-combphy: Enable U3 port for USB3OTG on RK3568   Kever Yang
• [PATCH 1/2] rockchip: rk3576: Allow pmu sram access for non-secure masters   Kever Yang
• [PATCH 2/2] rockchip: rk3576: Use DMA when loading FIT images   Kever Yang
• [PATCH] board: rockchip: Add FriendlyElec NanoPi Zero2   Kever Yang
• [PATCH] rockchip: tiger-rk3588: disable HS400   Kever Yang
• [PATCH v3 1/6] ARM: dts: rockchip: Remove mshc aliases from RK3288   Kever Yang
• [PATCH v3 2/6] ARM: dts: rockchip: Add spi_flash label to rk3288-veyron   Kever Yang
• [PATCH v3 3/6] ARM: dts: rockchip: move edp assigned-clocks to edp node on rk3288   Kever Yang
• [PATCH v3 4/6] rockchip: Switch rk3288-veyron boards to upstream devicetree   Kever Yang
• [PATCH v3 5/6] rockchip: Switch remaining rk3288 boards to upstream devicetree   Kever Yang
• [PATCH v2 02/12] rockchip: board: qnap-ts433: drop DW_MMC config options   Kever Yang
• [PATCH] rockchip: rk3588-rock-5b: Remove USB-C controller from u-boot.dtsi   Kever Yang
• [PATCH v2 01/12] rockchip: board: qnap-ts433: Fix TPL binary in build-example   Kever Yang
• [PATCH v3 6/6] rockchip: imply OF_UPSTREAM for rk3288 boards   Kever Yang
• [PATCH v2 01/12] rockchip: spl: Add common handling of USB bootsource_id 0x81   Kever Yang
• [PATCH v2 12/12] rockchip: board: qnap-tsx33: add support for Qnap TS233 devices   Kever Yang
• [PATCH] rockchip: Add support for Radxa E52C   Kever Yang
• [PATCH 1/1] arm: rockchip: don't use non-existent CONFIG_TPL_TINY_FRAMEWORK   Kever Yang
• [PATCH v2] rockchip: Reduce size of ramboot usb472 payload   Kever Yang
• [PATCH 1/2] arm64: dts: rockchip: Add devicetree for the FriendlyElec NanoPi R76S   Kever Yang
• [PATCH v2 02/12] rockchip: mkimage: Re-sort the spl_infos list alphanumerically   Kever Yang
• [PATCH v2 03/12] rockchip: mkimage: Add support for RK3506   Kever Yang
• [PATCH v2 04/12] ram: rockchip: Add basic support for RK3506   Kever Yang
• [PATCH v2 05/12] dt-bindings: clock: rockchip: Add RK3506 clock and reset unit   Kever Yang
• [PATCH v2 06/12] clk: rockchip: Add support for RK3506   Kever Yang
• [PATCH v2 08/12] pinctrl: rockchip: Add support for RK3506   Kever Yang
• [PATCH v2 09/12] rockchip: otp: Add support for RK3506   Kever Yang
• [PATCH v2 10/12] phy: rockchip-inno-usb2: Add support for RK3506   Kever Yang
• [PATCH v2 11/12] net: dwc_eth_qos_rockchip: Add support for RK3506   Kever Yang
• [PATCH v2 12/12] arch: arm: rockchip: Add initial support for RK3506   Kever Yang
• [PATCH v4 1/3] rockchip: Add initial RK3582 support   Kever Yang
• [PATCH v4 2/3] rockchip: rk3588-generic: Enable support for RK3582   Kever Yang
• [PATCH v4 3/3] rockchip: rk3588s-rock-5c: Add support for ROCK 5C Lite variant   Kever Yang
• Pull request: u-boot-rockchip-20260309   Kever Yang
• [PATCH] rockchip: rk3568: Include all addressable DRAM in memory map   Kever Yang
• [PATCH v3 00/12] rockchip: Add initial support for RK3506   Kever Yang
• [PATCH] clk: rockchip: rk3528: Add CLK_REF_USB3OTG support   Kever Yang
• [PATCH] clk: rockchip: rk3576: Add CLK_REF_USB3OTGx support   Kever Yang
• [PATCH v2 2/2] board: rockchip: Add FriendlyElec NanoPi R76S   Kever Yang
• [PATCH v5 0/4] Enable full UFS boot on Rockchip RK3576   Kever Yang
• [PATCH 0/2] mtd: nand: raw: Cadence NAND cleanup   dinesh.maniyam at altera.com
• [PATCH 1/2] mtd: nand: raw: Kconfig: clean up SPL Cadence NAND dependencies   dinesh.maniyam at altera.com
• [PATCH 2/2] mtd: nand: raw: use raw NAND MTD header   dinesh.maniyam at altera.com
• [PATCH 0/3] arm: socfpga: Arria10 SPL FIT support for SPI/NAND boot   dinesh.maniyam at altera.com
• [PATCH 1/3] arm: socfpga: Use custom header target buffer in SPL   dinesh.maniyam at altera.com
• [PATCH 2/3] arm: socfpga: Add SPL fitImage config match   dinesh.maniyam at altera.com
• [PATCH 3/3] arm: socfpga: Include required functions for FIT implementation in NAND   dinesh.maniyam at altera.com
• [PATCH] arm: socfpga: Add NAND register address and data register   dinesh.maniyam at altera.com
• [PATCH] arm: socfpga: Ensure FPGA in user mode before enabling the bridges   dinesh.maniyam at altera.com
• [PATCH] configs: socfpga: arria10: Disable CONFIG_USE_TINY_PRINTF   dinesh.maniyam at altera.com
• [PATCH] drivers: watchdog: Enhance watchdog support in SPL for N5X   dinesh.maniyam at altera.com
• [PATCH] arm: arria10: Add correct mask bits for RTRIM and PU_DRV_STRG   dinesh.maniyam at altera.com
• [PATCH v2] configs: socfpga: arria10: Disable CONFIG_SPL_USE_TINY_PRINTF   dinesh.maniyam at altera.com
• [PATCH] arm: socfpga: Enable MMC secure transaction in SPL.   dinesh.maniyam at altera.com
• [PATCH] arch: arm: agilex5: Configure DFISEL for SDMMC/NAND   dinesh.maniyam at altera.com
• [PATCH] arm: dts: socfpga: n5x: Drop kernel node from binman   dinesh.maniyam at altera.com
• [PATCH] arm: socfpga: Add fitImage for SPL programs periph RBF only   dinesh.maniyam at altera.com
• [PATCH] configs: adi: sc5xx: sync command configuration   ozndrgt at gmail.com
• [PATCH] MAINTAINERS: update SPI NOR reviewer   tkuw584924 at gmail.com
• [PATCH] mtd: spi-nor: Add gd25lx128j chip   Takahiro.Kuwano at infineon.com
• [PATCH v3 00/13] imx: add i.MX952 support   alice.guo at oss.nxp.com
• [PATCH v3 01/13] imx9: scmi: Get DDR size through SM SCMI API   alice.guo at oss.nxp.com
• [PATCH v3 02/13] imx95/imx94: Remove board_phys_sdram_size from each board   alice.guo at oss.nxp.com
• [PATCH v3 03/13] pinctrl: nxp: Add i.MX952 support   alice.guo at oss.nxp.com
• [PATCH v3 04/13] arm: imx: Add i.MX952 CPU type support   alice.guo at oss.nxp.com
• [PATCH v3 05/13] imx: ele_ahab: Add i.MX952 support to display_life_cycle()   alice.guo at oss.nxp.com
• [PATCH v3 06/13] imx: container: Add i.MX952 support to get_imageset_end()   alice.guo at oss.nxp.com
• [PATCH v3 07/13] arm: imx9: Add i.MX952 SoC support   alice.guo at oss.nxp.com
• [PATCH v3 08/13] cpu: imx952: Add i.MX952 support   alice.guo at oss.nxp.com
• [PATCH v3 09/13] arm: imx9: Keep WDG3/WDG4 untouched for i.MX952   alice.guo at oss.nxp.com
• [PATCH v3 10/13] arm64: dts: freescale: Add initial device tree for i.MX952   alice.guo at oss.nxp.com
• [PATCH v3 11/13] arm64: dts: freescale: Add i.MX952 EVK basic device tree   alice.guo at oss.nxp.com
• [PATCH v3 12/13] arm: dts: Add U-Boot device tree for i.MX952 EVK   alice.guo at oss.nxp.com
• [PATCH v3 13/13] board: nxp: imx952_evk: Add i.MX952 15x15 lpddr4x board support   alice.guo at oss.nxp.com
• [PATCH v3 0/4] Enable XSPI1 on i.MX943 EVK board   alice.guo at oss.nxp.com
• [PATCH v3 1/4] spi: nxp_xspi: Add new driver for NXP XSPI controller   alice.guo at oss.nxp.com
• [PATCH v3 2/4] misc: ele_api: Add support for XSPI SET GMID command   alice.guo at oss.nxp.com
• [PATCH v3 3/4] imx94_evk: Get ownership of XSPI control registers protected by GMID in SPL   alice.guo at oss.nxp.com
• [PATCH v3 4/4] imx943_evk: Enable XSPI1   alice.guo at oss.nxp.com
• [PATCH 00/10] imx: Switch watchdog addressing from macros to devicetree   alice.guo at oss.nxp.com
• [PATCH v1 01/10] imx: Add helper to get watchdog base address from DT alias   alice.guo at oss.nxp.com
• [PATCH v1 02/10] watchdog: ulp_wdog: Get watchdog base address from device tree   alice.guo at oss.nxp.com
• [PATCH v1 03/10] imx: soc: Get watchdog base addresses from device tree   alice.guo at oss.nxp.com
• [PATCH v1 04/10] imx7ulp: dtsi: Add wdog1 and wdog2 nodes with aliases   alice.guo at oss.nxp.com
• [PATCH v1 05/10] imx8ulp: dtsi: Add wdog3 alias and bootph-all property   alice.guo at oss.nxp.com
• [PATCH v1 06/10] imx93: dtsi: Add wdog3/wdog4/wdog5 alias and bootph-all property   alice.guo at oss.nxp.com
• [PATCH v1 07/10] imx91: dtsi: Add wdog3/wdog4/wdog5 alias and bootph-all property   alice.guo at oss.nxp.com
• [PATCH v1 08/10] imx943: dtsi: Add wdog3 and wdog4 nodes with aliases   alice.guo at oss.nxp.com
• [PATCH v1 09/10] imx95: dtsi: Add wdog3 and wdog4 nodes with aliases   alice.guo at oss.nxp.com
• [PATCH v1 10/10] imx: Remove hardcoded watchdog base address macros   alice.guo at oss.nxp.com
• [PATCH] misc: imx_ele: Fix compile without CMD_FUSE   niko.mauno at vaisala.com

Last message date: Wed Mar 11 23:01:12 CET 2026
Archived on: Wed Mar 11 23:02:15 CET 2026

• Messages sorted by: [ thread ] [ subject ] [ date ]
• More info on this list...