[PATCH v2 06/13] mach-sc5xx: Remove preliminary binman support

[Caleb Ethridge]

From: Caleb Ethridge <caleb.ethridge at analog.com>

Remove preliminary binman support from all sc5xx ADSP boards.
Full support was never added because it was unused.

Signed-off-by: Caleb Ethridge <caleb.ethridge at analog.com>
---
 arch/arm/dts/sc5xx.dtsi     | 41 -------------------------------------
 arch/arm/mach-sc5xx/Kconfig | 33 -----------------------------
 2 files changed, 74 deletions(-)

diff --git a/arch/arm/dts/sc5xx.dtsi b/arch/arm/dts/sc5xx.dtsi
index 9d346ae62e0..072631e34f7 100644
--- a/arch/arm/dts/sc5xx.dtsi
+++ b/arch/arm/dts/sc5xx.dtsi
@@ -25,47 +25,6 @@
 		bootph-pre-ram;
 	};
 
-#ifdef CONFIG_SC5XX_USE_BINMAN
-	binman {
-		filename = CONFIG_SC5XX_BINMAN_FILENAME;
-		stage1-boot {
-			offset = <CONFIG_SC5XX_UBOOT_SPL_OFFSET>;
-			type = "blob-ext";
-			filename = "spl/u-boot-spl.ldr";
-		};
-
-		/* since falcon mode can jump from SPL to OS directly
-		 * full u-boot is optional
-		 *
-		 * @todo: review if we can say this given support has
-		 * not yet been upstreamed. Otherwise we might have to
-		 * invoke binman only for full u-boot.
-		 */
-		stage2-boot {
-			offset = <CONFIG_SC5XX_UBOOT_OFFSET>;
-			type = "blob-ext";
-			filename = "u-boot.ldr";
-			optional;
-		};
-
-#ifdef CONFIG_SC5XX_FITIMAGE_NAME
-		fitImage {
-			offset = <CONFIG_SC5XX_FITIMAGE_OFFSET>;
-			type = "blob-ext";
-			filename = CONFIG_SC5XX_FITIMAGE_NAME;
-		};
-#endif
-
-#ifdef CONFIG_SC5XX_ROOTFS_NAME
-		rfs {
-			offset = <CONFIG_SC5XX_ROOTFS_OFFSET>;
-			type = "blob-ext";
-			filename = CONFIG_SC5XX_ROOTFS_NAME;
-		};
-#endif
-	};
-#endif
-
 	clocks {
 		dummy: dummy {
 			compatible = "fixed-clock";
diff --git a/arch/arm/mach-sc5xx/Kconfig b/arch/arm/mach-sc5xx/Kconfig
index 774c69091ee..276d173912a 100644
--- a/arch/arm/mach-sc5xx/Kconfig
+++ b/arch/arm/mach-sc5xx/Kconfig
@@ -143,39 +143,6 @@ config SC5XX_LOADADDR
 	help
 	  The default load address for u-boot.
 
-menu "Binman configuration"
-config SC5XX_USE_BINMAN
-	bool "Use binman for final image"
-	select BINMAN
-	help
-	  If you wish to use binman to assemble an image, say 'Y' here.
-	  This will enable binman-specific sections in the device tree.
-
-config SC5XX_BINMAN_FILENAME
-	string "Image name"
-	default "sc5xx-image.img"
-	depends on SC5XX_USE_BINMAN
-	help
-	  The name of the image that will be created by binman.
-	  This is used to create the final image.
-
-config SC5XX_FITIMAGE_NAME
-	string "FitImage name"
-	default "fitImage"
-	depends on SC5XX_USE_BINMAN
-	help
-	  The name of the fitImage to be packed by binman.
-	  This is used to create the final image.
-
-config SC5XX_ROOTFS_NAME
-	string "RootFS name"
-	default "rootfs"
-	depends on SC5XX_USE_BINMAN
-	help
-	  The name of the rootfs to be packed by binman.
-	  This is used to create the final image.
-endmenu
-
 config ADI_IMAGE
 	string "ADI fitImage type"
 	help
-- 
2.34.1