[PATCH next] arm: mach-k3: use Kconfig options for ATF/OPTEE size

[Anshul Dalal]

The reserved memory sizes for ATF and OPTEE were hard-coded for K3
devices, this patch replaces them with a Kconfig option allowing for
easier modifications.

Signed-off-by: Anshul Dalal <anshuld at ti.com>
---
 arch/arm/dts/k3-binman.dtsi   |  4 ++--
 arch/arm/mach-k3/Kconfig      | 15 +++++++++++++++
 arch/arm/mach-k3/common_fdt.c |  5 +++--
 3 files changed, 20 insertions(+), 4 deletions(-)

diff --git a/arch/arm/dts/k3-binman.dtsi b/arch/arm/dts/k3-binman.dtsi
index 0fd93f9536a..ad127663d03 100644
--- a/arch/arm/dts/k3-binman.dtsi
+++ b/arch/arm/dts/k3-binman.dtsi
@@ -477,7 +477,7 @@
 						FWPERM_SECURE_PRIV_RWCD |
 						FWPERM_SECURE_USER_RWCD)>;
 		start_address = <0x0 CONFIG_K3_ATF_LOAD_ADDR>;
-		end_address = <0x0 (CONFIG_K3_ATF_LOAD_ADDR + 0x1ffff)>;
+		end_address = <0x0 (CONFIG_K3_ATF_LOAD_ADDR + CONFIG_K3_ATF_RESERVED_SIZE - 1)>;
 	};
 	firewall_armv8_optee_fg: template-8 {
 		control = <(FWCTRL_EN | FWCTRL_LOCK |
@@ -486,7 +486,7 @@
 						FWPERM_SECURE_PRIV_RWCD |
 						FWPERM_SECURE_USER_RWCD)>;
 		start_address = <0x0 CONFIG_K3_OPTEE_LOAD_ADDR>;
-		end_address = <0x0 (CONFIG_K3_OPTEE_LOAD_ADDR + 0x17fffff)>;
+		end_address = <0x0 (CONFIG_K3_OPTEE_LOAD_ADDR + CONFIG_K3_OPTEE_RESERVED_SIZE - 1)>;
 	};
 
 	ti_falcon_template: template-9 {
diff --git a/arch/arm/mach-k3/Kconfig b/arch/arm/mach-k3/Kconfig
index 1b8c0b1eb96..ba1130a7996 100644
--- a/arch/arm/mach-k3/Kconfig
+++ b/arch/arm/mach-k3/Kconfig
@@ -130,6 +130,14 @@ config K3_ATF_LOAD_ADDR
 	  The load address for the ATF image. This value is used to build the
 	  FIT image header that places ATF in memory where it will run.
 
+config K3_ATF_RESERVED_SIZE
+	hex "Reserved DDR size for ATF"
+	default 0x80000 if (SOC_K3_AM625 || SOC_K3_AM62A7 || SOC_K3_AM62P5 || SOC_K3_J722S)
+	default 0x20000
+	help
+	  The runtime DDR size reserved for ATF. This value is used to fixup the
+	  kernel device-tree's reserved-memory node for ATF.
+
 config K3_OPTEE_LOAD_ADDR
 	hex "Load address of OPTEE image"
 	default 0x9e800000
@@ -137,6 +145,13 @@ config K3_OPTEE_LOAD_ADDR
 	  The load address for the OPTEE image. This value defaults to 0x9e800000
 	  if not provided in the board defconfig file.
 
+config K3_OPTEE_RESERVED_SIZE
+	hex "Reserved DDR size for OPTEE"
+	default 0x1800000
+	help
+	  The runtime DDR size reserved for OPTEE. This value is used to fixup the
+	  kernel device-tree's reserved-memory node for OPTEE.
+
 config K3_DM_FW
 	bool "Separate DM firmware image"
 	depends on CPU_V7R && !SOC_K3_AM642 && !SOC_K3_AM654 && !CLK_TI_SCI && !TI_SCI_POWER_DOMAIN
diff --git a/arch/arm/mach-k3/common_fdt.c b/arch/arm/mach-k3/common_fdt.c
index cb0fb8274a5..39cb00c3f43 100644
--- a/arch/arm/mach-k3/common_fdt.c
+++ b/arch/arm/mach-k3/common_fdt.c
@@ -173,12 +173,13 @@ int fdt_fixup_reserved(void *blob)
 	int ret;
 
 	ret = fdt_fixup_reserved_memory(blob, "tfa", CONFIG_K3_ATF_LOAD_ADDR,
-					0x80000);
+					CONFIG_K3_ATF_RESERVED_SIZE);
 	if (ret)
 		return ret;
 
 	return fdt_fixup_reserved_memory(blob, "optee",
-					 CONFIG_K3_OPTEE_LOAD_ADDR, 0x1800000);
+					 CONFIG_K3_OPTEE_LOAD_ADDR,
+					 CONFIG_K3_OPTEE_RESERVED_SIZE);
 }
 
 static int fdt_fixup_critical_trips(void *blob, int zoneoffset, int maxc)

---
base-commit: 1e240f7206fccde4ec73ea432ab8360d321c5fe5
change-id: 20260310-tfa_tee_addr_kconfig_refactor-2bf77949df0f

Best regards,
-- 
Anshul Dalal <anshuld at ti.com>