[PATCH] arm: stm32mp: Drop unnecessary BOARD_EARLY_INIT_F usage
Tom Rini
trini at konsulko.com
Wed Mar 25 20:00:27 CET 2026
All of these platforms enable CONFIG_BOARD_EARLY_INIT_F and then have a
do-nothing board_early_init_f function. Change to not enabling the
option and so not needing an empty function.
Signed-off-by: Tom Rini <trini at konsulko.com>
---
Cc: Patrick Delaunay <patrick.delaunay at foss.st.com>
Cc: Patrice Chotard <patrice.chotard at foss.st.com>
Cc: Jagan Teki <jagan at amarulasolutions.com>
Cc: Matteo Lisi <matteo.lisi at engicam.com>
Cc: Dillon Min <dillon.minfei at gmail.com>
Cc: uboot-stm32 at st-md-mailman.stormreply.com
---
arch/arm/mach-stm32mp/stm32mp1/spl.c | 15 ++++++---------
board/engicam/stm32mp1/spl.c | 6 ------
board/st/stm32h750-art-pi/stm32h750-art-pi.c | 5 -----
configs/stm32h750-art-pi_defconfig | 1 -
4 files changed, 6 insertions(+), 21 deletions(-)
diff --git a/arch/arm/mach-stm32mp/stm32mp1/spl.c b/arch/arm/mach-stm32mp/stm32mp1/spl.c
index e63bdaaf42fd..d2e41b8e65ff 100644
--- a/arch/arm/mach-stm32mp/stm32mp1/spl.c
+++ b/arch/arm/mach-stm32mp/stm32mp1/spl.c
@@ -90,11 +90,6 @@ void spl_display_print(void)
}
#endif
-__weak int board_early_init_f(void)
-{
- return 0;
-}
-
uint32_t stm32mp_get_dram_size(void)
{
struct ram_info ram;
@@ -204,10 +199,12 @@ void board_init_f(ulong dummy)
/* enable console uart printing */
preloader_console_init();
- ret = board_early_init_f();
- if (ret) {
- log_debug("board_early_init_f() failed: %d\n", ret);
- hang();
+ if (IS_ENABLED(CONFIG_BOARD_EARLY_INIT_F)) {
+ ret = board_early_init_f();
+ if (ret) {
+ log_debug("board_early_init_f() failed: %d\n", ret);
+ hang();
+ }
}
ret = uclass_get_device(UCLASS_RAM, 0, &dev);
diff --git a/board/engicam/stm32mp1/spl.c b/board/engicam/stm32mp1/spl.c
index bb2bd446aa8c..19e5ab0180f9 100644
--- a/board/engicam/stm32mp1/spl.c
+++ b/board/engicam/stm32mp1/spl.c
@@ -15,9 +15,3 @@ void board_vddcore_init(u32 voltage_mv)
if (IS_ENABLED(CONFIG_PMIC_STPMIC1) && CONFIG_IS_ENABLED(POWER))
opp_voltage_mv = voltage_mv;
}
-
-int board_early_init_f(void)
-{
- return 0;
-}
-
diff --git a/board/st/stm32h750-art-pi/stm32h750-art-pi.c b/board/st/stm32h750-art-pi/stm32h750-art-pi.c
index 244bb5eefb3a..8b1b23337790 100644
--- a/board/st/stm32h750-art-pi/stm32h750-art-pi.c
+++ b/board/st/stm32h750-art-pi/stm32h750-art-pi.c
@@ -32,11 +32,6 @@ int dram_init_banksize(void)
return 0;
}
-int board_early_init_f(void)
-{
- return 0;
-}
-
int board_late_init(void)
{
return 0;
diff --git a/configs/stm32h750-art-pi_defconfig b/configs/stm32h750-art-pi_defconfig
index 971d5c00d88f..0d0dca2511b7 100644
--- a/configs/stm32h750-art-pi_defconfig
+++ b/configs/stm32h750-art-pi_defconfig
@@ -24,7 +24,6 @@ CONFIG_DEFAULT_FDT_FILE="stm32h750i-art-pi"
CONFIG_SYS_CBSIZE=256
CONFIG_SYS_PBSIZE=282
# CONFIG_DISPLAY_CPUINFO is not set
-CONFIG_BOARD_EARLY_INIT_F=y
# CONFIG_BOARD_INIT is not set
CONFIG_BOARD_LATE_INIT=y
CONFIG_SYS_PROMPT="U-Boot > "
--
2.43.0
More information about the U-Boot
mailing list