[PATCH v2 3/4] cmd: efidebug: add ecpt command

[Heinrich Schuchardt]

On 3/9/26 17:36, Vincent Stehlé wrote:
> Add an "efidebug ecpt" command, to print the conformance profiles in the
> ECPT:
> 
>    => efidebug ecpt
>    cce33c35-74ac-4087-bce7-8b29b02eeb27  EFI EBBR 2.1 Conformance Profile
> 
> Suggested-by: Heinrich Schuchardt <xypron.glpk at gmx.de>
> Signed-off-by: Vincent Stehlé <vincent.stehle at arm.com>
> Cc: Ilias Apalodimas <ilias.apalodimas at linaro.org>
> Cc: Tom Rini <trini at konsulko.com>

Reviewed-by: Heinrich Schuchardt <xypron.glpk at gmx.de>

> ---
> 
> Changes in v2:
> - Change log level to error and adapt the printed message (suggested by
>    Heinrich)
> - Also in that case, return an error code
> 
>   cmd/efidebug.c | 49 +++++++++++++++++++++++++++++++++++++++++++++++++
>   1 file changed, 49 insertions(+)
> 
> diff --git a/cmd/efidebug.c b/cmd/efidebug.c
> index 109496d9e95..7b733119c82 100644
> --- a/cmd/efidebug.c
> +++ b/cmd/efidebug.c
> @@ -533,6 +533,47 @@ static int do_efi_show_defaults(struct cmd_tbl *cmdtp, int flag,
>   	return CMD_RET_SUCCESS;
>   }
>   
> +#if CONFIG_IS_ENABLED(EFI_ECPT)
> +/**
> + * do_efi_show_ecpt() - show UEFI conformance profiles in ECPT
> + *
> + * @cmdtp:	Command table
> + * @flag:	Command flag
> + * @argc:	Number of arguments
> + * @argv:	Argument array
> + * Return:	CMD_RET_SUCCESS on success,
> + *		CMD_RET_USAGE or CMD_RET_FAILURE on failure
> + *
> + * Implement efidebug "ecpt" sub-command.
> + * Show all the UEFI Conformance Profiles listed in the EFI Conformance Profiles
> + * Table (ECPT).
> + */
> +static int do_efi_show_ecpt(struct cmd_tbl *cmdtp, int flag, int argc,
> +			    char *const argv[])
> +{
> +	const struct efi_conformance_profiles_table *ecpt;
> +	u16 n;
> +
> +	if (argc != 1)
> +		return CMD_RET_USAGE;
> +
> +	ecpt = efi_get_configuration_table(&efi_ecpt_guid);
> +	if (!ecpt) {
> +		log_err("ECPT table missing\n");
> +		return CMD_RET_FAILURE;
> +	}
> +
> +	for (n = 0; n < ecpt->number_of_profiles; n++) {
> +		const efi_guid_t *guid = &ecpt->conformance_profiles[n];
> +
> +		printf("%pUl  %s\n", guid->b,
> +		       uuid_guid_get_str(guid->b) ?: "(unknown)");
> +	}
> +
> +	return CMD_RET_SUCCESS;
> +}
> +#endif /* CONFIG_IS_ENABLED(EFI_ECPT) */
> +
>   static const char * const efi_mem_type_string[] = {
>   	[EFI_RESERVED_MEMORY_TYPE] = "RESERVED",
>   	[EFI_LOADER_CODE] = "LOADER CODE",
> @@ -1586,6 +1627,10 @@ static struct cmd_tbl cmd_efidebug_sub[] = {
>   			 "", ""),
>   	U_BOOT_CMD_MKENT(defaults, CONFIG_SYS_MAXARGS, 1, do_efi_show_defaults,
>   			 "", ""),
> +#if CONFIG_IS_ENABLED(EFI_ECPT)
> +	U_BOOT_CMD_MKENT(ecpt, CONFIG_SYS_MAXARGS, 1, do_efi_show_ecpt,
> +			 "", ""),
> +#endif
>   	U_BOOT_CMD_MKENT(images, CONFIG_SYS_MAXARGS, 1, do_efi_show_images,
>   			 "", ""),
>   	U_BOOT_CMD_MKENT(memmap, CONFIG_SYS_MAXARGS, 1, do_efi_show_memmap,
> @@ -1680,6 +1725,10 @@ U_BOOT_LONGHELP(efidebug,
>   	"  - show UEFI handles\n"
>   	"efidebug defaults\n"
>   	"  - show default EFI filename and PXE architecture\n"
> +#if CONFIG_IS_ENABLED(EFI_ECPT)
> +	"efidebug ecpt\n"
> +	"  - show conformance profiles in the ECPT\n"
> +#endif
>   	"efidebug images\n"
>   	"  - show loaded images\n"
>   	"efidebug memmap\n"