[PATCH next] include: env: ti: move board specific scripts out of ti_common

[Anshul Dalal]

bootcmd_ti_mmc had cpsw0_qsgmii_phyinit related scripts even though this
was only relevant for the j721e/j7200 SoCs. This patch instead factors
out those scripts into a generic 'board_init' which is called as part of
bootcmd_ti_mmc.

This allows boards to more easily add custom behaviour to the ti_mmc
bootflow instead of having to modify the ti_common.env file.

Signed-off-by: Anshul Dalal <anshuld at ti.com>
---
 board/ti/j7200/j7200.env     | 8 ++++++++
 board/ti/j721e/j721e.env     | 8 ++++++++
 include/env/ti/ti_common.env | 8 +++-----
 3 files changed, 19 insertions(+), 5 deletions(-)

diff --git a/board/ti/j7200/j7200.env b/board/ti/j7200/j7200.env
index e22a954d8db..7bb63825c52 100644
--- a/board/ti/j7200/j7200.env
+++ b/board/ti/j7200/j7200.env
@@ -37,3 +37,11 @@ main_cpsw0_qsgmii_phyinit=
 #if CONFIG_TARGET_J7200_A72_EVM
 rproc_fw_binaries= 1 /lib/firmware/j7200-mcu-r5f0_1-fw 2 /lib/firmware/j7200-main-r5f0_0-fw 3 /lib/firmware/j7200-main-r5f0_1-fw
 #endif
+
+#if CONFIG_CMD_REMOTEPROC
+board_init=
+	if env exists do_main_cpsw0_qsgmii_phyinit;
+		then run main_cpsw0_qsgmii_phyinit;
+	fi;
+	run boot_rprocs;
+#endif
diff --git a/board/ti/j721e/j721e.env b/board/ti/j721e/j721e.env
index 34f5f63d60a..9ecf7bfabde 100644
--- a/board/ti/j721e/j721e.env
+++ b/board/ti/j721e/j721e.env
@@ -37,3 +37,11 @@ main_cpsw0_qsgmii_phyinit=
 #if CONFIG_TARGET_J721E_A72_EVM
 rproc_fw_binaries= 1 /lib/firmware/j7-mcu-r5f0_1-fw 2 /lib/firmware/j7-main-r5f0_0-fw 3 /lib/firmware/j7-main-r5f0_1-fw 4 /lib/firmware/j7-main-r5f1_0-fw 5 /lib/firmware/j7-main-r5f1_1-fw 6 /lib/firmware/j7-c66_0-fw 7 /lib/firmware/j7-c66_1-fw 8 /lib/firmware/j7-c71_0-fw
 #endif
+
+#if CONFIG_CMD_REMOTEPROC
+board_init=
+	if env exists do_main_cpsw0_qsgmii_phyinit;
+		then run main_cpsw0_qsgmii_phyinit;
+	fi;
+	run boot_rprocs;
+#endif
diff --git a/include/env/ti/ti_common.env b/include/env/ti/ti_common.env
index a0ed83f52ac..62b93eb25c4 100644
--- a/include/env/ti/ti_common.env
+++ b/include/env/ti/ti_common.env
@@ -24,12 +24,10 @@ get_fit_config=setexpr name_fit_config gsub / _ conf-${fdtfile}
 run_fit=run get_fit_config; bootm ${addr_fit}#${name_fit_config}${overlaystring}
 bootcmd_ti_mmc=
 	run init_${boot};
-#if CONFIG_CMD_REMOTEPROC
-	if env exists do_main_cpsw0_qsgmii_phyinit;
-		then run main_cpsw0_qsgmii_phyinit;
+	if test -n ${board_init}; then
+		echo Running board_init ...;
+		run board_init;
 	fi;
-	run boot_rprocs;
-#endif
 	if test ${boot_fit} -eq 1;
 		then run get_fit_${boot}; run get_fit_overlaystring; run run_fit;
 	else;

---
base-commit: c0ca147ac6228949a6d6497531c9f2f4a0dc6c67
change-id: 20260306-board_init_env_introduce-3da7ec4a1ad3

Best regards,
-- 
Anshul Dalal <anshuld at ti.com>