[PATCH 4/6] arm: dts: mt8189: add UFS nodes

[David Lechner]

Add UFS nodes to mt8189.dtsi.

This is copied from the proposed upstream patch [1].

Link: https://lore.kernel.org/linux-mediatek/20251111070031.305281-10-jh.hsu@mediatek.com/ [1]
Signed-off-by: David Lechner <dlechner at baylibre.com>
---
 arch/arm/dts/mt8189.dtsi | 115 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 115 insertions(+)

diff --git a/arch/arm/dts/mt8189.dtsi b/arch/arm/dts/mt8189.dtsi
index d246be63293..e9fd21ea095 100644
--- a/arch/arm/dts/mt8189.dtsi
+++ b/arch/arm/dts/mt8189.dtsi
@@ -7,6 +7,7 @@
 #include <dt-bindings/clock/mediatek,mt8189-clk.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/reset/ti-syscon.h>
 
 / {
 	compatible = "mediatek,mt8189";
@@ -286,6 +287,120 @@
 			#interrupt-cells = <2>;
 		};
 
+		ufshci: ufshci at 112b0000 {
+			compatible = "mediatek,mt8183-ufshci";
+			reg = <0 0x112b0000 0 0x2300>;
+			interrupts = <GIC_SPI 393 IRQ_TYPE_LEVEL_HIGH 0>;
+
+			clocks = <&topckgen_clk CLK_TOP_U_SEL>,
+				 <&clk26m>,
+				 <&topckgen_clk CLK_TOP_MSDCPLL_D2>,
+				 <&topckgen_clk CLK_TOP_AES_UFSFDE_SEL>,
+				 <&topckgen_clk CLK_TOP_U_MBIST_SEL>,
+				 <&ufscfg_ao_reg_clk CLK_UFSCFG_AO_REG_UNIPRO_TX_SYM>,
+				 <&ufscfg_ao_reg_clk CLK_UFSCFG_AO_REG_UNIPRO_RX_SYM0>,
+				 <&ufscfg_ao_reg_clk CLK_UFSCFG_AO_REG_UNIPRO_RX_SYM1>,
+				 <&ufscfg_ao_reg_clk CLK_UFSCFG_AO_REG_UNIPRO_SYS>,
+				 <&ufscfg_ao_reg_clk CLK_UFSCFG_AO_REG_U_SAP_CFG>,
+				 <&ufscfg_ao_reg_clk CLK_UFSCFG_AO_REG_U_PHY_TOP_AHB_S_BUS>,
+				 <&ufscfg_pdn_reg_clk CLK_UFSCFG_REG_UFSHCI_UFS>,
+				 <&ufscfg_pdn_reg_clk CLK_UFSCFG_REG_UFSHCI_AES>,
+				 <&ufscfg_pdn_reg_clk CLK_UFSCFG_REG_UFSHCI_U_AHB>,
+				 <&ufscfg_pdn_reg_clk CLK_UFSCFG_REG_UFSHCI_U_AXI>;
+
+			clock-names = "ufs_sel",
+				      "ufs_sel_min_src",
+				      "ufs_sel_max_src",
+				      "ufs_fde",
+				      "ufs_mbist",
+				      "unipro_tx_sym",
+				      "unipro_rx_sym0",
+				      "unipro_rx_sym1",
+				      "unipro_sys",
+				      "unipro_phy_sap",
+				      "phy_top_ahb_s_bus",
+				      "ufshci_ufs",
+				      "ufshci_aes",
+				      "ufshci_ufs_ahb",
+				      "ufshci_aes_axi";
+
+			freq-table-hz = <26000000 208000000>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<0 0>,
+					<0 0>;
+
+			vcc-supply = <&mt6359_vemc_1_ldo_reg>;
+			vccq-supply = <&mt6359_vio18_ldo_reg>;
+			vccq2-supply = <&mt6359_vufs_ldo_reg>;
+
+			resets = <&ufscfgpdn_rst 0>,
+				 <&ufscfgpdn_rst 1>,
+				 <&ufscfgpdn_rst 2>;
+
+			reset-names = "unipro_rst",
+				      "crypto_rst",
+				      "hci_rst";
+
+			mediatek,ufs-disable-mcq;
+			mediatek,ufs-rtff-mtcmos;
+			mediatek,ufs-broken-vcc;
+
+			status = "disabled";
+		};
+
+		ufscfg_ao_reg_clk: syscon at 112b8000 {
+			compatible = "mediatek,mt8189-ufscfg-ao", "syscon", "simple-mfd";
+			reg = <0 0x112b8000 0 0x1000>;
+			#clock-cells = <1>;
+
+			ufscfgao_rst: reset-controller {
+				compatible = "ti,syscon-reset";
+				#reset-cells = <1>;
+
+				ti,reset-bits = <
+					/* ufs mphy reset */
+					/* 8: mphy */
+					0x48  8 0x4c  8 0 0
+					(ASSERT_SET | DEASSERT_SET | STATUS_NONE)
+				>;
+			};
+		};
+
+		ufscfg_pdn_reg_clk: syscon at 112bb000 {
+			compatible = "mediatek,mt8189-ufscfg-pdn", "syscon", "simple-mfd";
+			reg = <0 0x112bb000 0 0x1000>;
+			#clock-cells = <1>;
+
+			ufscfgpdn_rst: reset-controller {
+				compatible = "ti,syscon-reset";
+				#reset-cells = <1>;
+
+				ti,reset-bits = <
+					/* ufs ufschi/crypto/unipro reset */
+					/* 0: unipro */
+					0x48  0 0x4c  0 0 0
+					(ASSERT_SET | DEASSERT_SET | STATUS_NONE)
+					/* 1: ufs-crypto */
+					0x48  1 0x4c  1 0 0
+					(ASSERT_SET | DEASSERT_SET | STATUS_NONE)
+					/* 2: ufshci */
+					0x48  2 0x4c  2 0 0
+					(ASSERT_SET | DEASSERT_SET | STATUS_NONE)
+				>;
+			};
+		};
+
 		pwrap: pwrap at 1cc04000 {
 			compatible = "mediatek,mt8189-pwrap", "mediatek,mt8195-pwrap", "syscon";
 			reg = <0 0x1cc04000 0 0x1000>;

-- 
2.43.0