[PATCH 2/3] k3-am62-pocketbeagle2: add initial board support

[Marko Mäkelä]

Hi Robert,

Fri, Mar 27, 2026 at 09:15:35PM +0200, Marko Mäkelä wrote:
[snip]
>Can you help me enable the USB serial console, first for u-boot and 
>subsequently for the Linux console?

I just found your reply on this topic:
https://forum.beagleboard.org/t/pocketbeagle2-with-techlab-cape-usb-to-serial/42940

So, I must wire a 3.3V UART to a JST SH 1.0 mm 3 Pin connector and plug 
it in on the opposite side of the USB-C connector.

	Marko