[PATCH 11/11] configs: add new defconfig for mt8395_evk_ufs

[David Lechner]

On 3/17/26 9:24 AM, Julien Stephan wrote:
> This new defconfig is based on mt8395_evk, where we remove the mmc

We will still want MMC enabled here for the SD card slot. The
target OS could be on an SD card even when booting from UFS.

> configs and add all the ufs related ones.
> 
> Signed-off-by: Julien Stephan <jstephan at baylibre.com>
> ---
>  board/mediatek/MAINTAINERS       |  3 ++-
>  configs/mt8395_evk_ufs_defconfig | 33 +++++++++++++++++++++++++++++++++
>  2 files changed, 35 insertions(+), 1 deletion(-)
> 
> diff --git a/board/mediatek/MAINTAINERS b/board/mediatek/MAINTAINERS
> index 4f371592059..dba620e57d5 100644
> --- a/board/mediatek/MAINTAINERS
> +++ b/board/mediatek/MAINTAINERS
> @@ -21,7 +21,8 @@ M:	Macpaul Lin <Macpaul.Lin at mediatek.com>
>  S:	Maintained
>  F:	configs/mt8390_evk_defconfig
>  
> -MT8395 EVK
> +MT8395 EVK (UFS)

I think saying "(UFS)" here is a bit confusing. It is still the same
board (just different dip switch setting). I would not change this line.

>  M:	Macpaul Lin <Macpaul.Lin at mediatek.com>
>  S:	Maintained
>  F:	configs/mt8395_evk_defconfig
> +F:	configs/mt8395_evk_ufs_defconfig
> diff --git a/configs/mt8395_evk_ufs_defconfig b/configs/mt8395_evk_ufs_defconfig
> new file mode 100644
> index 00000000000..9a9de689953
> --- /dev/null
> +++ b/configs/mt8395_evk_ufs_defconfig
> @@ -0,0 +1,33 @@
> +CONFIG_ARM=y
> +CONFIG_COUNTER_FREQUENCY=13000000
> +CONFIG_POSITION_INDEPENDENT=y
> +CONFIG_ARCH_MEDIATEK=y
> +CONFIG_TEXT_BASE=0x4c000000
> +CONFIG_NR_DRAM_BANKS=1
> +CONFIG_DEFAULT_DEVICE_TREE="mediatek/mt8395-genio-1200-evk-ufs"
> +CONFIG_TARGET_MT8195=y
> +CONFIG_SYS_LOAD_ADDR=0x60000000
> +CONFIG_IDENT_STRING=" mt8395-evk"
> +# CONFIG_BOARD_INIT is not set
> +CONFIG_CMD_CLK=y
> +CONFIG_CMD_GPT=y
> +CONFIG_CMD_PART=y
> +CONFIG_CMD_UFS=y
> +CONFIG_OF_UPSTREAM=y
> +CONFIG_CLK=y
> +CONFIG_PHY=y
> +CONFIG_PINCTRL=y
> +CONFIG_PINCONF=y
> +CONFIG_PINCTRL_MT8195=y
> +CONFIG_DM_PMIC=y
> +CONFIG_DM_PMIC_MTK_PWRAP=y
> +CONFIG_DM_REGULATOR=y
> +CONFIG_DM_REGULATOR_MT6359=y
> +CONFIG_SCSI=y
> +CONFIG_BAUDRATE=921600
> +CONFIG_DM_SERIAL=y
> +CONFIG_MTK_SERIAL=y
> +CONFIG_UFS=y
> +CONFIG_UFS_MEDIATEK=y
> +CONFIG_WDT=y
> +CONFIG_WDT_MTK=y
> 

Can we make a .config file and #include it here so that we aren't
duplicating so much of mt8395_evk_defconfig?