[PATCH 2/2] board/raspberrypi: add bcm2712d0-rpi-5-b for Raspberry Pi 5

[Peter Robinson]

On Mon, 16 Feb 2026 at 18:45, Filip Kokosiński
<filip.kokosinski at gmail.com> wrote:
>
> This commit adds an FDT entry for the d0 stepping of the BCM2712 SoC.
> This entry is used by the v1.1 revision of the board
> (revision & 0x0f == 1).
>
> Signed-off-by: Filip Kokosiński <filip.kokosinski at gmail.com>
Reviewed-by: Peter Robinson <pbrobinson at gmail.com>
Tested-by: Peter Robinson <pbrobinson at gmail.com>

> ---
>  board/raspberrypi/rpi/rpi.c | 5 ++++-
>  1 file changed, 4 insertions(+), 1 deletion(-)
>
> diff --git a/board/raspberrypi/rpi/rpi.c b/board/raspberrypi/rpi/rpi.c
> index 1b404b448f3..3d61d08f3a4 100644
> --- a/board/raspberrypi/rpi/rpi.c
> +++ b/board/raspberrypi/rpi/rpi.c
> @@ -197,7 +197,10 @@ static const struct rpi_model rpi_models_new_scheme[] = {
>         },
>         [0x17] = {
>                 "5 Model B",
> -               FDTFILES(DTB_DIR "bcm2712-rpi-5-b.dtb"),
> +               FDTFILES(
> +                       [0] = DTB_DIR "bcm2712-rpi-5-b.dtb",
> +                       [1] = DTB_DIR "bcm2712d0-rpi-5-b.dtb"
> +               ),
>                 true,
>         },
>         [0x18] = {
> --
> 2.51.2
>