[ELDK] ELDK4.2 on Fedora 11
raju at vetukuri.com
raju at vetukuri.com
Thu Aug 20 18:43:45 CEST 2009
Hi Wolfgang,
I am following the instructions that have been given in your guide to port
the linux to Freescale ADS boards. I am attaching few lines of the initial
error here for your reference. Hope this will help you in guiding me to
resolve the make menuconfig command. I feel this is because of warning:
multi-line strings not supported, if yes please let me know the solution.
[emg at localhost denx]$ make ARCH=powerpc CROSS_COMPILE=ppc_82xx- menuconfig
scripts/kconfig/mconf arch/powerpc/Kconfig
arch/powerpc/platforms/Kconfig.cputype:22: unknown option "If"
arch/powerpc/platforms/Kconfig.cputype:156: unknown option "If"
arch/powerpc/platforms/Kconfig.cputype:157: unknown option "SWIOTLB"
arch/powerpc/platforms/Kconfig.cputype:158: unknown option "is"
arch/powerpc/platforms/Kconfig.cputype:160: unknown option "If"
arch/powerpc/platforms/Kconfig.cputype:171: unknown option "This"
arch/powerpc/platforms/Kconfig.cputype:172: unknown option "altivec"
arch/powerpc/platforms/Kconfig.cputype:173: unknown option "any"
arch/powerpc/platforms/Kconfig.cputype:174: unknown option "kernel"
arch/powerpc/platforms/Kconfig.cputype:176: unknown option "If"
arch/powerpc/platforms/Kconfig.cputype:188: unknown option "This"
arch/powerpc/platforms/Kconfig.cputype:189: unknown option "VSX"
arch/powerpc/platforms/Kconfig.cputype:190: unknown option "CPUs"
arch/powerpc/platforms/Kconfig.cputype:192: unknown option "If"
arch/powerpc/platforms/Kconfig.cputype:204: unknown option "This"
arch/powerpc/platforms/Kconfig.cputype:205: unknown option "SPE"
arch/powerpc/platforms/Kconfig.cputype:206: unknown option "effect"
arch/powerpc/platforms/Kconfig.cputype:208: unknown option "If"
arch/powerpc/platforms/Kconfig.cputype:248: unknown option "If"
arch/powerpc/platforms/Kconfig.cputype:270: unknown option "If"
arch/powerpc/platforms/Kconfig.cputype:271: unknown option "machines"
arch/powerpc/platforms/Kconfig.cputype:272: unknown option "you"
arch/powerpc/platforms/Kconfig.cputype:273: unknown option "On"
arch/powerpc/platforms/Kconfig.cputype:274: unknown option "N"
arch/powerpc/platforms/Kconfig.cputype:276:warning: multi-line strings not
supported
arch/powerpc/platforms/Kconfig.cputype:276: unknown option "If"
init/Kconfig:46: unknown option "This"
init/Kconfig:47: unknown option "drivers"
init/Kconfig:48: unknown option "scheduled"
init/Kconfig:50: unknown option "Unless"
init/Kconfig:51: unknown option "falls"
init/Kconfig:52: unknown option "using"
init/Kconfig:53: unknown option "cause"
init/Kconfig:54: unknown option "you"
init/Kconfig:55: unknown option "drivers"
init/Kconfig:97: unknown option "A"
init/Kconfig:24: missing end statement for this entry
> Dear raju at vetukuri.com,
>
> In message <2758.121.243.142.16.1250612681.squirrel at 75.126.219.125> you
> wrote:
>>
>> 1. Is it ok to use Fedora 11 for the ELD4.2?
>
> Yes, this is perfectly fine.
>
>> 2. I recently cloned the Linux tree from the link
>> git://git.denx.de/linux-2.6-denx.git for the version 2.6.30. But when I
>> tried to configure the kernel it complained about the config file. It
>> was
>> indicating all the options are not found. It seems that the config file
>> was not correctly downloaded. I need to check once again. Have any body
>> observed this before.
>
> Please provide the full log including the exact commands you used,
> and the exact error messages, otherwise it is impossible for us to
> help. I think you must have done something wrong (for example trying
> to use the obsolete ARCH=ppc, or similar).
>
> Best regards,
>
> Wolfgang Denk
>
> --
> DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
> "The value of marriage is not that adults produce children, but that
> children produce adults." - Peter De Vries
>
More information about the eldk
mailing list