[ELDK] Linux DWC OTG Driver - Host mode

Mark Malopy mark.malopy at onrampwireless.com
Wed Mar 31 01:19:56 CEST 2010


Stefan/Wolfgang,

After doing a little research on the CurMod bit, I am working with a hardware engineer to identify why our USB transceiver is identifying that the Vbus voltage is not set at a sufficient level such that the Vbus encoding state received over the ULPI is causing the OTG core to believe we are configured as a device. This is most likely the root cause of my problem with host mode (and the lengthy posts I generated on your message board).

Thanks,

Mark Malopy


More information about the eldk mailing list