[ELDK] eldk and kernel 3.x-DENX

[Wolfgang Denk]

Dear =?UTF-8?B?0JzQsNC7INCh0LrRgNGL0LvRkdCy?=,

In message <CACT9YCHUENiTcJ4SY723mZUbV8K0uMCchAnHOf8=Of3Ds6++Mw at mail.gmail.com> you wrote:
> 
> i'm using ELDK 5, and trying to build the kernel 3.x-DENX for the amcc
> yosemite board. In past when i tried to build the 2.6.26.8 kernel

Just a general note: please note that the current configurations of
ELDK 5.x for the Power Architecture are not optimized and thus not
recommended for the PPC4xx processors.

Configurations for PPC4xx processors (without FPU - 40x, and with FPU
- 44x, 46x, 47x etc) can and will be provided if there is sufficient
demand (which so far is not the case).

Best regards,

Wolfgang Denk

-- 
DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd at denx.de
Advice is seldom welcome; and those who want it the most always like
it the least.                         -- Philip Earl of Chesterfield