[ELDK] Booting ELDK5.4 rootfs via NFS hangs

[Tobias Markow]

Dear Fabio Estevam,

On 16.11.2013 13:47, schrieb Fabio Estevam:
> Shouldn't this be ttyAMA0 instead?
On my evaluation board i'm using the UART3. When using ttyAMA0 theres no 
output after U-boot "Starting kernel ..."

>> Starting Bootlog daemon: bootlogd: cannot find console device 249:3 under
> According to this message the console device was not found.
>
> So it seems you need to pass ttyAMA0 in your kernel command line.

I can't use the UART0 on my evaluation board. I don't understand why 
this should cause the hang, because the output is already done at ttyAPP3?!

Best regards,
Tobias Markow