[ELDK] ELDK 5.6 Xenomai Build stops when choosing MACHINE=mpc5200

[Marek Vasut]

On Friday, May 29, 2015 at 02:48:14 PM, belatronix at freenet.de wrote:
> Hello,

Hi,

> i failed to build the ELDK 5.6 with Xenomai support ( MACHINE=mpc5200
> bitbake core-image-minimal-xenomai )
> 
> I got an Error in Task 194:
> git/eldk/meta-eldk/recipes-kernel/xenomai/linux-xenomai_3.14-ipipe.bb,
> do_configure) failed with exit code '1'

[...]

> Hunk #2 succeeded at 2620 (offset 7 lines).
> checking file mm/mmap.c.orig
> checking file mm/mmu_context.c
> checking file mm/mprotect.c
> checking file mm/vmalloc.c
> prepare-kernel.sh: Unable to patch kernel 3.14.43 with
> ipipe-core-3.14.22-powerpc-4.patch.

What I find a bit odd is that you're patching 3.14.43 . I think ELDK 5.6
was released with an earlier 3.14 kernel. Did you make some change in this
department ? I think this is why you get patch failures (see your log for
FAILED keyword) and why the recipe fails.

> WARNING:
> /opt/eldk/build/mpc5200_xeno-2014-11-19-8346b82/tmp/work/mpc5200-linux/lin
> ux-xenomai/3.14-ipipe-r2/temp/run.do_configure.13404:1 exit 2 from
> /opt/eldk/build/mpc5200_xeno-2014-11-19-8346b82/tmp/work-shared/xenomai-26
> .4/xenomai-2.6.4/scripts/prepare-kernel.sh --arch=powerpc
> --adeos=/opt/eldk/build/mpc5200_xeno-2014-11-19-8346b82/tmp/work-shared/xe
> nomai-2.6.4/xenomai-2.6.4/ksrc/arch/powerpc/patches/*ipipe*3.14*powerpc*.pa
> tch
> --linux=/opt/eldk/build/mpc5200_xeno-2014-11-19-8346b82/tmp/work/mpc5200-l
> inux/linux-xenomai/3.14-ipipe-r2/git

[...]

Best regards,
Marek Vasut