[tbot] Release 0.7.0

[Harald Seiler]

Hello Stefano,

On Sun, 2019-03-03 at 18:12 +0100, Stefano Babic wrote:
> Hallo Harald,
> 
> On 03/03/19 14:14, Harald Seiler wrote:
> > Hi Stefano,
> > 
> > On Sat, 2019-03-02 at 21:09 +0100, Stefano Babic wrote:
> > > Hi,
> > > 
> > [...]
> > > I updated to 0.7 - I have some questions:
> > > 
> > > - even running with checked-in boards and lab, I get errors due to
> > > missing kconfig module:
> > 
> > Oh, sorry, tbot-denx requires latest tbot from the development branch.
> > I'll add this to the README.
> 
> Ok - should we not have a -devel branch for tbot-denx, too ?

Sounds good, I'll do so after the next tbot release

> > > - checking the code, it looks to me that boards and labs are much more
> > > correlated together instead to be orthogonal. In fact, I forked "mira"
> > > to let it running in my lab.
> > > 
[...]
> > 
> 
> Yes, I think we have already had this discussion, I did this firstly. My
> dream is that I can put all my lab specific stuff in lab and board is
> unaware of it, so that I can run "tbot -b mira.py -l pollux.py" or "tbot
> -b mira.py -l augsburg.py" without changing anything in the board. I
> just drive with my board to another lab and I can still run all test cases.

That's the plan :)

> > I know this is not ideal and I already have some experimental changes to tbot
> > for a better system in the future.  I will update tbot-denx and a planned
> > reference/example repo to reflect these changes once they are upstream ...
> 
> ok, got it.
> 
> > The config issue we can see here is very important to be solved right,
> 
> Agree.
> 
> > which is
> > why I am hesitant to rush a solution that might need to be changed again in the
> > future.
> 
> Fine with me, I thought it was already solved ;-)

Sadly not :(

> >  Although I will push a proposal to a new branch as soon as possible so
> > you can give feedback if it covers all cases you need ...
> > 
> 
> Regards,
> Stefano
> 
> 
-- 
Harald

DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-62  Fax: +49-8142-66989-80   Email: hws at denx.de