[U-Boot-Users] Warning : eepro100 driver cause problems with HardHat Linux

[Ken Chou]

> -----Original Message-----
> From: "Callebaut, Benoît" [mailto:benoit.callebaut at barco.com]
> Sent: Thursday, February 06, 2003 8:58 AM
> To: U-Boot-Users at Sourceforge. Net (E-mail)
> Subject: [U-Boot-Users] Warning : eepro100 driver cause problems with
> HardHat Linux
> 
> Hello,
> 	On our board (PPC8245 based) with 2 82559 MAC/PHY with their
> interrupt lines directly connected to the interrupt lines of the
> processor,
> the config of the mac/PHY done by PPCBoot makes problems when we leave the
> MAC/PHY initialization code in PPCBoot but don't use BOOTP. the MACC/PHY
> seem to not send any packet under Linux.
> With the Network code disabled in PPCBoot all work fine.
> 

I also used PPCBOOT and Monta Vista Linux.
They both run happily on my MPC8245/MPC8241 boards.

Ken