[U-Boot-Users] I have one question about MTD.

[Jacob Chan]

Dear all,
How could I turn on the MTD support in u-boot?
I don’t know how to do that?
I want to use the setenv command to set (assume I used 32MB Flash)
mtd0 0x00000000,0x00040000 → u-boot
mtd1 0x00040000,0x000E0000 → kernel
mtd2 0x000E0000,0x01F00000 → filesystem
mtd3 0x01F00000,0x01FF0000 → reserved
the left space 0x01FF0000,0x02000000 → for env 
Then the kernel will get those parameters to set MTD.
Can I do that and not need to modify u-boot ?
Your reply and support will be highly appreciated.

Thank you for your time and attention

Jacob Chan
Jacob_chan at so-net.net.tw