[U-Boot-Users] BDI error

[Rune Torgersen]

Hi
Have anybody seen this BDI error and have an idea why it happens?
The board is based on a 8266.
(FLASH is programed with HRCW (0x08b23645) starting at address 0xff800000)

- TARGET: waiting for target Vcc
- TARGET: processing power-up delay
- TARGET: processing user reset request
- BDI asserts HRESET
- Reset JTAG controller passed
- Bypass check: 0x55 => 0xAA
- Bypass check: 0x55 => 0xAA
- JTAG exists check passed
- Target PVR is 0x80911014
- COP status is 0x01
- Check running state passed
- BDI scans COP freeze command
- BDI removes HRESET
- COP status is 0x05
- Check stopped state passed
- Check LSRL length passed
- BDI sets breakpoint at 0xFFF00100
- BDI resumes program execution
- COP status is 0xF1
- Waiting for target stop failed
- TARGET: Break at boot vector failed, freeze forced
- TARGET: Target PVR is 0x80911014
- TARGET: resetting target passed
- TARGET: processing target startup ....
- TARGET: processing target startup passed

Rune Torgersen
System Developer
Innovative Systems LLC
1000 Innovative Drive
Mitchell, SD 57301
Ph: 605-995-6120
www.innovsys.com