[U-Boot-Users] Successful Port to PrPMC800

[Wolfgang Denk]

In message <OFD77EF229.66ADD00D-ON85256DC6.004C16D7-85256DC6.00506153 at sita.aero> you wrote:
> 
> I've successfully ported U-Boot to the Motorola PrPMC800.  Support for
> FLASH, PCI, IDE and networking have bee successfully enabled.  It has been
> in use now for several weeks in a stable form.  I do have one lingering
> problem of not being able to turn on the L1 and L2 data caches.  Doing so
> apparently causes the system to hang.  Unfortunately I don't have a BDI2000
> setup for this board to better debug the problem.  I used just a good ol'
> console and plenty of printf statements to do the port.
> 
> I can't give a specific time for when I will have the port submitted for a
> future release of U-Boot.  But I will do it.  I'd like to fix my cache

So why not submitting your patches _now_ ?

Best regards,

Wolfgang Denk

-- 
Software Engineering:  Embedded and Realtime Systems,  Embedded Linux
Phone: (+49)-8142-4596-87  Fax: (+49)-8142-4596-88  Email: wd at denx.de
Life would be so much easier if everyone read the manual.