[U-Boot-Users] U-BOOT for MPC885 Eval board - i2c problem

[Sachin S Mehta]

Hi,

We  are using MPC885ADS Eval. board ,we are porting  U-Boot 1.1.1 on it and working fine,

we have following query :

We are connected an EEPROM (CHIP ADDRESS : 0X50)  on  I2C bus,
 when we trying to check with  "iprobe"  command its displaying a message like :

Valid chip addresses:  00 01 02 03 04 05 06 07 ............ 80 

Its talking a lots of time and not working.

Has anyone faced same problem?


thanks and regards,
Sachin mehta