[U-Boot-Users] TFTP configuration Vs gdb response time !

George G. Davis gdavis at mvista.com
Sat Oct 16 17:25:38 CEST 2004


On Sat, Oct 16, 2004 at 07:56:41PM +0530, ravi.aloor at wipro.com wrote:
> 4. Now I already have BDI-new.cfg file in my /tftpboot/ directory on my
> PC. I pinged BDI. Response is OK. Then I made 'telnet' to BDI. The
> following is the brief response.
> 
> VERIFY [<offset>] [<file> [<format>]] verify a program file to target
> memory
> PROG   [<offset>] [<file> [<format>]] program flash memory
>                            <format>  : SREC, BIN, AOUT, ELF or COFF
> ERASE  [<address> [<mode>]]  erase a flash memory sector, chip or block
>                    <mode>  : CHIP, BLOCK or SECTOR (default is sector)
> ERASE  <addr> <step> <count> erase multiple flash sectors
> UNLOCK <addr> <step> <count> unlock multiple flash sectors
> FLASH  <type> <size> <bus>   change flash configuration
> FENA   <addr> <size>         enable autoamtic programming to flash
> memory
> FDIS                         disable autoamtic programming to flash
> memory
> DELAY  <ms>                  delay for a number of milliseconds
> SELECT <core>                change the current core
>                              len : the number of bits 1..256
>                              bx  : a data byte, two hex digits
> HOST   <ip>                  change IP address of program file host
> PROMPT <string>              defines a new prompt string
> CONFIG                       display or update BDI configuration
> CONFIG <file> [<hostIP> [<bdiIP> [<gateway> [<mask>]]]]
> HELP                         display command list
> QUIT                         terminate the Telnet session
> 
> # CONFIG: cannot open BDI-new.cfg
> # CONFIG: cannot open BDI-new.cfg
> Core#0>
> 
> Means, it is not getting my BDI-new.cfg file even though the file is in
> /tftpboot/ directory on my PC while my PC is working as TFTP server. Why
> it is BDI is not able to read BDI-new.cfg ?

Try:

	chmod a+r /tftpboot/BDI-new.cfg

That should fix it assuming tftp is properly configured and enabled on your
RH8 development host.

--
Regards,
George




More information about the U-Boot mailing list