[U-Boot-Users] CF 5282 fec.c

[Jens Scharsig]

Hello

I'm new on U-Boot and work on a MCF5282 port. I have modify the cvs 
source and U-Boot runs on my own MCF5282 board (I get a promt on serial 
line). But i get "Tx not ready" and "Tx Timeout" messages for each 
ethernet access.
I discover the fec.c, and find out that only 10MBit haft duplex is use.
Is there in implementation for full 100MBit use?


regards Jens Scharsig

Internet: http://www.bus-elektronik.de