[U-Boot-Users] [PATCH] Major overhaul for Xilinx ML300 board support

[Keith J Outwater]

Peter - 
I considered using the Xilinx/ml300 infrastructure in U-Boot to assist my 
port to a custom VirtexIIPro board,
but I was concerned about maintaining synchronization between hardware IP 
and IP software driver versions.
In the end I took the driver source code generated in EDK and placed it 
locally in my board-specific
directory.  Somehow, there should be a way for a particular Xilinx FPGA 
processor based board to
select the correct driver versions based on the hardware IP versions used. 
 Any ideas?  I would really
prefer to reference driver code in a common library rather than using a 
local copy.

Keith


u-boot-users-admin at lists.sourceforge.net wrote on 09/28/2005 01:55:15 AM:

> Attached the CHANGELOG entry for a larger patch that overhauls the ML300 

> support in U-Boot. 
>