[U-Boot-Users] TFTP timeout

[Olivier Vernet]

>Stefan Roese already recommended to enable the debug  output  in  the
>4xx ethernet driver - did you do this? What did it say?

Yes, Philippe had enabled debug output (#define INFO_4XX_ENET).

I've re-enable them with top-of-git u-boot version, trace looks
like previous one.


Best regards

Olivier

Here is the trace:

[BASE6000]> tftpboot 4000000 pMulti6000
tftpboot 4000000 pMulti6000
About preceeding transfer (eth0):
- Sent packet number 2890
- Received packet number 2898
- Handled packet number 2898
ENET Speed is 100 Mbps - FULL duplex connection Using ppc_4xx_eth0
device TFTP from server 10.33.17.251; our IP address is 10.33.17.162
Filename 'pMulti6000'.
Load address: 0x4000000
Loading: send option "timeout 5"
Got OACK: timeout 5
#################################################################
...
 
#################################################################
 
#################################################################
 
#################################################################
         ###########################################
MAL error occured.... ISR = c0100010 UIC = = 2  MAL_DEF = e0100000
MAL_ERR= e0000000 About preceeding transfer (eth0):
- Sent packet number 30974
- Received packet number 31059
- Handled packet number 31059

MAL error occured.... ISR = c0100010 UIC = = 2  MAL_DEF = e0100000
MAL_ERR= e0000000 About preceeding transfer (eth0):
- Sent packet number 0
- Received packet number 0
- Handled packet number 0
T T
MAL error occured.... ISR = c0100010 UIC = = 2  MAL_DEF = e0100000
MAL_ERR= e0000000 About preceeding transfer (eth0):
- Sent packet number 2
- Received packet number 0
- Handled packet number 0

MAL error occured.... ISR = c0100010 UIC = = 2  MAL_DEF = e0100000
MAL_ERR= e0000000 About preceeding transfer (eth0):
- Sent packet number 0
- Received packet number 0
- Handled packet number 0
T
MAL error occured.... ISR = c0100010 UIC = = 2  MAL_DEF = e0100000
MAL_ERR= e0000000 About preceeding transfer (eth0):
- Sent packet number 1
- Received packet number 0
- Handled packet number 0
T
MAL error occured.... ISR = c0100010 UIC = = 2  MAL_DEF = e0100000
MAL_ERR= e0000000 About preceeding transfer (eth0):
- Sent packet number 1
- Received packet number 0
- Handled packet number 0
T